The OpenNET Project / Index page

[ новости/++ | форум | wiki | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

led (4)
  • >> led (4) ( FreeBSD man: Специальные файлы /dev/* )

  • BSD mandoc
     

    NAME

    
    
    led
    
     - API for manipulating LED's, lamps and other annunciators
    
     
    

    SYNOPSIS

       #include <dev/led/led.h>

    Fd typedef void led_t(void *priv, int onoff); struct cdev * led_create_state (led_t *func void *priv char const *name int state);
    struct cdev * led_create (led_t *func void *priv char const *name);
    void led_destroy (struct cdev *);
     

    DESCRIPTION

    The driver provides generic support for handling LEDs, lamps and other annunciators.

    The hardware driver must supply a function to turn the annunciator on and off and the device Fa name of the annunciator relative to /dev/led/ The Fa priv argument is passed back to this on/off function and can be used however the hardware driver sees fit.

    The lamp can be controlled by opening and writing ASCII strings to the /dev/led/bla device.

    In the following, we will use this special notation to indicate the resulting output of the annunciator:

    *
    The annunciator is on for 1/10th second.
    _
    The annunciator is off for 1/10th second.

    State can be set directly, and since the change happens immediately, it is possible to flash the annunciator with very short periods and synchronize it with program events. It should be noted that there is a non-trivial overhead, so this may not be usable for benchmarking or measuring short intervals.

    0
    Turn the annunciator off immediately.
    1
    Turn the annunciator on immediately.

    Flashing can be set with a given period. The pattern continues endlessly.

    f
    _*
    f1
    _*
    f2
    __**
    f3
    ___***
    ...
    f9
    _________*********

    Three high-level commands are available:

    d%d
    Numbers. Each digit is blinked out at 1/10th second, zero as ten pulses. Between digits a one second pause and after the last digit a two second pause after which the sequence is repeated.
    s%s
    String. This gives full control over the annunciator. Letters `A' ... `J' turn the annunciator on for from 1/10th to one full second. Letters `a' ... `j' turn the annunciator off for 1/10th to one full second. Letters `u' and `U' turn the annunciator off and on respectively when the next UTC second starts. Unless terminated with a `.' , the sequence is immediately repeated.
    m%s
    Morse.

    `.'
    becomes `_*'
    `-'
    becomes `_*** '
    `'
    becomes `__ '
    `\n'
    becomes `____ '

    The sequence is repeated after a one second pause.  

    FILES

    /dev/led/*

     

    EXAMPLES

    A `d12 ' flashes the lamp

    *__________*_*______________________________

    A `sAaAbBa flashes '

    *_*__**_

    /usr/games/morse -l "Soekris rocks" > /dev/led/error
    
     

    SEE ALSO

    morse(6)  

    HISTORY

    The driver first appeared in Fx 5.2 .  

    AUTHORS

    An -nosplit This software was written by An Poul-Henning Kamp Aq phk@FreeBSD.org .

    This manual page was written by An Sergey A. Osokin Aq osa@FreeBSD.org and An Poul-Henning Kamp Aq phk@FreeBSD.org .


     

    Index

    NAME
    SYNOPSIS
    DESCRIPTION
    FILES
    EXAMPLES
    SEE ALSO
    HISTORY
    AUTHORS


    Поиск по тексту MAN-ов: 



      Закладки на сайте
      Проследить за страницей
    Created 1996-2017 by Maxim Chirkov  
    ДобавитьРекламаВебмастеруГИД  
    Hosting by Ihor