The OpenNET Project / Index page

[ новости/++ | форум | wiki | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 [Cписок руководств | Печать]

jpeg2yuv (1)
  • >> jpeg2yuv (1) ( Linux man: Команды и прикладные программы пользовательского уровня )


    jpeg2yuv - Convert jpeg images to the yuv format. 



    jpeg2yuv [-b num] [-f num] [-I num] [-L num] [-n num] [-l num] [-j filename]



    jpeg2yuv decompresses a sequence of JPEG files and pipes the image data to stdout as a YUV4MPEG2 stream. Any JPEG format supported by libjpeg can be read. stdout will be filled with the YUV4MPEG2 movie data stream, so be prepared to pipe it on to mpeg2enc or to write it into a file.

    This is not the utility you are looking for. This program is primarily a diagnostic utility for debugging MJPEG recordings, not for making movies from standard graphics JPEG images. It does not make any attempt to convert the full-range pixel data from standard JPEG's into the padded-range pixel data used in digital video. The utility you are probably looking for is ppmtoy4m(1), which is also included in MJPEGtools.



    jpeg2yuv accepts the following options:

    -b num
    Frame offset: skip output of the first 'num' frames. (default: 0)
    -f num
    Set the frame rate of stream accepts the same numbers. No default, this option has to be specified.
    -I num
    interlacing mode: p = none / progressive
    t = top field first
    b = bottom field first
    No default, this option has to be specified.
    -L num
    0 = non-interlaced (two successive fields per JPEG file)
    1 = interlaced fields
    -l num
    Specifies the number of loops (default: 0 loops )
    When this option is not used the given range of images is only processed once. If you use this option with num of -1 jpeg2yuv will loop forever writing the image to stdout. When you use n > 0 it will loop n-times till it finishes.
    -n num
    Specifies the number of frames to process. (default: all = -1)
    -j {1}%{2}d{3}
    Read JPEG frames with the name components as follows:
     {1} JPEG filename prefix (e g: picture_ )
     {2} Counting placeholder (like in C, printf, eg 06 ))
     {3} File extension. Something like this: .jpg A correct description of the files could look like this: picture_%06d.jpg
    -v num
    Verbosity level (0, 1 or 2)



    The frame rate desciption seems not to be up to date. The NTSC integer ratios seem not to be supported. As a workaround specify a PAL (25) or FILM (24) and set the right frame rate in mpeg2enc with the -F option.



    This man page was written by Bernhard Praschinger.
    If you have questions, remarks, problems or you just want to contact the developers, the main mailing list for the MJPEG-tools is:

    For more info, see our website at



    mjpegtools(1), mpeg2enc(1), ppmtoy4m(1), yuv2lav(1), yuvdenoise(1), yuvmedianfilter(1), yuvscaler(1)




    Поиск по тексту MAN-ов: 

      Закладки на сайте
      Проследить за страницей
    Created 1996-2017 by Maxim Chirkov  
    Hosting by Ihor