The OpenNET Project / Index page

[ новости /+++ | форум | wiki | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

ib (7)
  • ib (4) ( Solaris man: Специальные файлы /dev/* )
  • >> ib (7) ( Solaris man: Макропакеты и соглашения )
  •  

    NAME

    ib - InfiniBand Bus Nexus Driver
     
    

    DESCRIPTION

    The ib (IB nexus) driver is a pseudo nexus driver that supports enumeration of port devices, VPPA (Virtual Physical Point Attachment), HCA_SVC (HCA Service) devices, and I/O controllers (IOC) on the InfiniBand fabric that are visible to the host and provides interfaces to cfgadm_ib(1M) to manage hot-plugging of IB devices. The ib nexus driver enumerates the port device, VPPA devices and HCA_SVC devices based on entries specified in the ib.conf file. IOC devices are enumerated on demand. The IB nexus driver uses InfiniBand Device Manager services (ibdm(7D)) to enumerate port devices, VPPA devices, HCA_SVC devices, and IOCs on the IB fabric.  

    CONFIGURATION

    You configure the ib driver by defining properties in the ib.conf file. The IB nexus driver supports the following properties:

    PROPERTY NAMEDEFAULTPOSSIBLE VALUES

    port-svc-list"" List of service names, for example: srv

    vppa-svc-list

    hca-svc-list

    The port-svc-list property defines the list of port communication service names per port. The IB nexus driver creates a device instance for each entry in this property per Host Channel Adapter (HCA) port. The ib.conf file contains a port-svc-list="" entry by default. You update port-svc-list with service names you want to add to the system.

    The vppa-svc-list property defines the list of VPPA communication service names per port per partition key. The IB nexus driver creates a device instance for each entry in this property per Host Channel Adapter (HCA) port. The ib.conf file contains a vppa-svc-list="" entry by default. You update vppa-svc-list with service names you want to add to the system.

    The hca-svc-list property defines the list of HCA_SVC communication service names per HCA. The IB nexus driver creates a device instance for each entry in this property per Host Channel Adapter (HCA). The ib.conf file contains a hca-svc-list="" entry by default. You update hca-svc-list with service names you want to add to the system.

    The service name specified in port-svc-list, vppa-svc-list and hca-svc-list must be unique, be a maximum of four characters long, and is limited to digits 0-9 and letters a-z and A-Z.

    IOC drivers (which are parented by the IB nexus driver) may themselves have .conf files. To distinguish those cases from pseudo drivers parented by IB nexus, such drivers should include the "ib-node-type" property with value "merge" in the IOC driver.conf file. That property ensures that properties from the .conf file are merged with other properties found through hardware probing.  

    EXAMPLES

    Example 1: Default ib.conf file:

        #
       # Copyright 2001-2003 Sun Microsystems, Inc.  All rights reserved.
       # Use is subject to license terms.
       # 
       port-svc-list="" 
       vppa-svc-list="";
       hca-svc-list="";
    

    In Example 1, the IB nexus driver does not create any port/vppa/hca_svc device instances.

    Example 2: A sample ib.conf file with one entry for "srv" service:

       
      port-svc-list="srv" 
      vppa-svc-list="";
      hca-svc-list="";
    

    The IB nexus driver creates one srv service instance for every HCA port that exists on the host. For example, if there are two HCAs, each with two ports on the host, the IB nexus driver creates four instances of the srv service.

    Example 3:

       
      port-svc-list="srv" 
      vppa-svc-list="ipib";
      hca-svc-list="";
    

    If there are two HCAs in the system with two ports each and each port has two valid PKEY values, the IB nexus driver creates four instances of srv service (one for each port). It also creates eight instances of ipd service (one per each port/PKEY combination).

    Example 4:

       
      port-svc-list="srv";
      vppa-svc-list="ipib";
      hca-svc-list="hca_nfs";
    

    The IB nexus driver creates one instance of hca_nfs service for each HCA in the system.

    Example 5: IOC driver .conf

     ib-node-type="merge";
    enable-special-mode="on";
    

     

    FILES

    /kernel/drv/ib

    32-bit x86 ELF kernel module

    /kernel/drv/amd64/ib

    64-bit x86 ELF kernel module

    /kernel/drv/sparcv9/ib

    64-bit SPARC ELF kernel module

    /kernel/drv/ib.conf

    driver configuration file

     

    ATTRIBUTES

    See attributes(5) for a description of the following attribute:

    ATTRIBUTE TYPEATTRIBUTE VALUE

    ArchitectureSPARC, x86

    Availability

    Interface Stability

     

    SEE ALSO

    cfgadm_ib(1M), driver.conf(4), ib(4), attributes(5), ibcm(7D), ibdm(7D), ibtl(7D)

    Writing Device Drivers

    InfiniBand Architecture Specification, Volume 1: Release 1.1

    System Administration Guide: Basic Administration  

    DIAGNOSTICS

    In addition to being logged, the following messages may appear on the system console. All messages are formatted in the following manner:

    ib: WARNING: Error message...
    

    unit-address property in %s.conf not well-formed.

    The driver.conf file does not have a valid "unit-addr" property defined. This property is an array of strings.

    Cannot name node from %s.conf.

    The driver.conf file does not have a valid "unit-addr" property defined. This property is an array of strings.

    Waiting for Port %d initialization.

    Waiting for port initialization from subnet manager.


     

    Index

    NAME
    DESCRIPTION
    CONFIGURATION
    EXAMPLES
    FILES
    ATTRIBUTES
    SEE ALSO
    DIAGNOSTICS


    Поиск по тексту MAN-ов: 




    Партнёры:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2024 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру