The OpenNET Project / Index page

[ новости /+++ | форум | wiki | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

hpfc (7)
  • >> hpfc (7) ( Solaris man: Макропакеты и соглашения )
  •  

    NAME

    hpfc - Agilent fibre channel host bus adapter
     
    

    SYNOPSIS

    PCI   pci103c
    
     

    DESCRIPTION

    The hpfc fibre channel host bus adapter is a SCSA compliant nexus driver that supports all Agilent fibre channel host bus adapters, including the HHBA5100x, HHBA5101x, and HHBA5121x models. Agilent host bus adapters support the fibre channel protocol on private fibre channel arbitrated loops and fabrics. The driver supports up to ten host bus adapters, with a maximum of 125 fibre channel devices on each host bus adapter. The hpfc driver supports a maximum of 256 LUNs per target.

    The hpfc driver does not support the BIOS Int 13 feature, which enables the booting of an operating system. As a result, you should not install an operating system on devices attached to the hpfc driver.  

    CONFIGURATION

    The hpfc driver attempts to configure itself using the information in the /kernel/drv/hpfc.conf configuration file.

    By default, the driver supports only LUN 0 for each target device. To add multiple LUN support, modify the /kernel/drv/sd.conf file.

    Before upgrading the hpfc driver, backup the sd.conf file to save customized LUN settings and then use pkgrm(1M) to remove the old version of the driver.

    The host bus adapter port is initialized to FL_Port when connected to a fabric switch. To change it to F_Port, add the init_as_nport=1 entry to the hpfc.conf file and reboot the system.

    To conserve system resources, at least one disk drive must be attached to the hpfc driver. If no devices are attached, the driver will not load.  

    FILES

    /kernel/drv/hpfc 32-bit ELF kernel module

    /kernel/drv/sparcv9/hpfc 64-bit ELF kernel module

    /kernel/drv/hpfc.conf Driver configuration file

    /kernel/drv/sd.conf SCSI disk configuration file

     

    ATTRIBUTES

    See attributes(5) for descriptions of the following attributes:

    ATTRIBUTE TYPEATTRIBUTE VALUE
    Architecturex86, SPARC

     

    SEE ALSO

    luxadm(1M), pkgrm(1M), prtconf(1M), driver.conf(4), attributes(5), ses(7D), ssd(7D)

    ANSI X3.272-1996, Fibre Channel Arbitrated Loop (FC-AL),

    ANSI X3.269-1996, Fibre Channel Protocol for SCSI (FCP),

    ANSI X3.270-1996, SCSI-3 Architecture Model (SAM),

    Fibre Channel Private Loop SCSI Direct Attach (FC-PLDA)


     

    Index

    NAME
    SYNOPSIS
    DESCRIPTION
    CONFIGURATION
    FILES
    ATTRIBUTES
    SEE ALSO


    Поиск по тексту MAN-ов: 




    Партнёры:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2024 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру