Интерактивная система просмотра системных руководств (man-ов)
hostapd_cli (8)
>> hostapd_cli (8) ( FreeBSD man: Команды системного администрирования )
BSD mandoc
NAME
hostapd_cli
- text-based frontend program for interacting with
hostapd(8)
SYNOPSIS
[commands
]
DESCRIPTION
The
utility
is a text-based frontend program for interacting with
hostapd(8).
It is used to query the current status.
The
utility
can show the
current authentication status,
dot11 and dot1x MIBs, etc.
The
utility
supports two modes: interactive and command line.
Both modes share the same command set.
Interactive mode is started when
is executed without any parameters on the command line.
Commands are then entered from the controlling terminal in
response to the
prompt.
In command line mode, the same commands are
entered as command line arguments.
COMMANDS
The following commands may be supplied on the command line
or at a prompt when operating interactively.
mib
Report MIB variables (dot1x, dot11) for the current interface.
sta addr
Report the MIB variables for the associated station with MAC address
addr
all_sta
Report the MIB variables for all associated stations.
help
Show usage help.
interface [ifname
]
Show available interfaces and/or set the current interface
when multiple are available.
level debug_level
Change the debugging level in
hostapd(8).
Larger numbers generate more messages.
The
utility was written by
An Jouni Malinen Aq jkmaline@cc.hut.fi .
This manual page is derived from the
README
file included in the
hostapd
distribution.
