The OpenNET Project / Index page

[ новости/++ | форум | wiki | теги ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

foo2lava-wrapper (1)
  • >> foo2lava-wrapper (1) ( Linux man: Команды и прикладные программы пользовательского уровня )
  •  

    NAME

    foo2lava-wrapper - Convert Postscript into a LAVAFLOW printer stream
     
    

    SYNOPSIS

    foo2lava-wrapper [options] [ps-file]  

    DESCRIPTION

    foo2lava-wrapper is a Foomatic compatible printer wrapper for the foo2lava printer driver. This script reads a Postscript ps-file or standard input and converts it to Zenographics LAVAFLOW printer format for driving the Konica Minolta magicolor 2530 DL network color laser printer and other Zenographics-based LAVAFLOW printers. This script can be used in a standalone fashion, but is intended to be called from a printer spooler system which uses the Foomatic printer database.

     

    COMMAND LINE OPTIONS

     

    Normal Options

    These are the options used to select the parameters of a print job that are usually controlled on a per job basis.
    -c
    Print in color (else monochrome).
    -C colormode
    Color correction mode [0].
    0    Best compromise
    1    Photos (using m2300w CRDs)
    2    Photos and text (using m2300w CRDs)
    3    Graphics and text (using m2300w CRDs)
    10    ICM color profile (using -G *.icm file)
    -d duplex
    Duplex code to send to printer [1].
    1    off2    long edge3    short edge
    -m media
    Media code to send to printer [0].

    Media2530DL

    plain0        
    transparency4        
    thick stock20        
    envelope22        
    letterhead23        
    postcard25        
    labels26        
    recycled27        
    -p paper
    Paper size code to send to printer [2].
    1    executive25    A5
    2    letter26    A4
    3    legal45    B5jis
    80    env Monarch65    B5iso
    81    env #1090    env DL
    91    env C592    env B5
    835    4x6" photo837    10x15cm photo
    -n copies
    Number of copies [1].
    -r xresxyres
    Set device resolution in pixels/inch [1200x600].
    -s source
    Source (Input Slot) code to send to printer [255].
    1    Tray 1255    auto
    4    Tray 2    
    -t
    Draft mode. Every other pixel is white.
    -2 -3 -4 -5 -6 -8 -9 -10 -12 -14 -15 -16 -18
    Print in N-up. Requires the psutils package.
    -o orient
    Orientation used for N-up.
    Portrait-op(normal)
    Landscape-ol(rotated 90 degrees anticlockwise)
    Seascape-os(rotated 90 degrees clockwise)
     

    Printer Tweaking Options

    These are the options used to customize the operation of foo2lava for a particular printer.
    -u xoffxyoff
    Set the offset of the start of the printable region from the upper left corner, in pixels [varies with paper size]. The defaults should work on the 2200DL and 2300DL, and have not been tested on any other printers.
    -l xoffxyoff
    Set the offset of the end of the printable region from the lower right corner, in pixels [varies with paper size]. The defaults should work on the 2200DL and 2300DL, and have not been tested on any other printers.
    -L mask
    Send the logical clipping values from -u/-l in the LAVAFLOW stream. foo2lava-wrapper always runs Ghostscript with the ideal page dimensions, so that the scale of the image is correct, regardless whether or not the printer has unprintable regions. This option is used to move the position of the clipped image back to where it belongs on the page. The default is to send the amount which was clipped by -u and -l, and should be good in most cases.
    0don't send any logical clipping amounts
    1only send Y clipping amount
    2only send X clipping amount
    3send both X and Y clipping amounts
    -z model
    Model: 0=2530DL. Default is 0.
     

    Color Tweaking Options

    These are the options used to control the quality of color output. Color correction is currently a WORK IN PROGRESS.
    -g gsopts
    Additional options to pass to Ghostscript, such as -glq-dDITHERPPI=nnnrq, etc. This option may appear more than once.
    -G profile.icm
    Convert profile.icm to a Postscript color rendering dictionary (CRD) using foo2zjs-icc2ps and adjust the printer colors by using the Postscript setcolorrendering operator. (WORK IN PROGRESS).
    -G gamma-file.ps
    Prepend gamma-file.ps to the Postscript input to perform color correction using the setcolortransfer Postscript operator. For example, the file might contain:
    {0.333 exp} {0.333 exp} {0.333 exp} {0.333 exp} setcolortransfer
    -I intent
    Select profile intent from the ICM file. 0=Perceptual, 1=Colorimetric, 2=Saturation, 3=Absolute. Default is 0 (perceptual).
     

    Debugging Options

    These options are used for debugging foo2lava and its wrapper.
    -S plane
    Output just a single color plane from a color print and print it on the black plane. The default is to output all color planes.
    1Cyan
    2Magenta
    3Yellow
    4Black
    -D level
    Set Debug level [0].

     

    EXAMPLES

    Create a monochrome LAVAFLOW stream from a Postscript document, examine it, and then print it using a RAW print queue:

    foo2lava-wrapper testpage.ps > testpage.zm
    lavadecode < testpage.zm
    lpr -P raw testpage.zm
    
    Create a color LAVAFLOW stream from a Postscript document:

    foo2lava-wrapper -c testpage.ps > testpage.zc
    

     

    FILES

    /usr/bin/foo2lava-wrapper  

    SEE ALSO

    foo2lava(1), lavadecode(1)  

    AUTHOR

    Rick Richardson <rickr@mn.rr.com>
    http://foo2zjs.rkkda.com/


     

    Index

    NAME
    SYNOPSIS
    DESCRIPTION
    COMMAND LINE OPTIONS
    Normal Options
    Printer Tweaking Options
    Color Tweaking Options
    Debugging Options
    EXAMPLES
    FILES
    SEE ALSO
    AUTHOR


    Поиск по тексту MAN-ов: 




      Закладки на сайте
      Проследить за страницей
    Created 1996-2017 by Maxim Chirkov  
    ДобавитьРекламаВебмастеруГИД  
    Hosting by Ihor