The OpenNET Project / Index page

[ новости/++ | форум | wiki | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 [Cписок руководств | Печать]

foo2hp2600-wrapper (1)
  • >> foo2hp2600-wrapper (1) ( Linux man: Команды и прикладные программы пользовательского уровня )


    foo2hp2600-wrapper - part of the printer driver foo2zjs


    foo2hp2600-wrapper [options] [ps-file]  


    foo2hp2600-wrapper is a foomatic printer wrapper for the foo2hp2600 printer driver. This script reads a Postscript ps-file or standard input and converts it to Zenographics ZjStream printer format.


    Normal Options:

    -b bits
    Bits per plane (1 or 2) [1]
    Print in color (else monochrome)
    -d duplex
    Duplex code to send to printer [1] 1=off, 2=longedge, 3=shortedge
    -m media
    Media code to send to printer [1] 1=standard, 2=transparency, 3=glossy, 257=envelope, 259=letterhead, 261=thickstock, 262=postcard, 263=labels
    -p paper
    Paper code [1] 1=letter, 5=legal, 7=executive, 9=A4, 11=A5, 13=B5
    -n copies
    Number of copies [1]
    -r <xres>x<yres>
    Set device resolution in pixels/inch [600x600]
    -s source
    Source code to send to printer [7] 1=upper, 2=lower, 4=manual, 7=auto Code numbers may vary with printer model. -2 / -4 2-up, 4-up


    Printer Tweaking Options:

    -u <xoff>x<yoff>
    Set offset of upper left printable in pixels [varies]
    -l <xoff>x<yoff>
    Set offset of lower right printable in pixels [varies]
    -L mask
    Send logical clipping values from -u/-l in ZjStream [3] 0=no, 1=Y, 2=X, 3=XY
    Do not output START_PLANE codes. May be needed by some monochrome-only printers.
    -X padlen
    Add extra zero padding to the end of BID segments [16]


    Color Tweaking Options:

    -g gsopts
    Additional options to pass to Ghostscript, such as -dDITHERPPI=nnn, etc. May appear more than once. []
    -G profile.icm
    Convert profile.icm to a Postscript CRD using icc2ps and adjust colors using the setcolorrendering PS operator. /usr/share/foo2zjs/icm/ will be searched for profile.icm.
    -I intent
    Select profile intent from ICM file [0] 0=Perceptual, 1=Colorimetric, 2=Saturation, 3=Absolute
    Prepend gamma-file to the Postscript input to perform color correction using the setcolortransfer PS operator.


    Debugging Options:

    -S plane
    Output just a single color plane from a color print [all] 1=Cyan, 2=Magenta, 3=Yellow, 4=Black
    -D lvl
    Set Debug level [0]
    -V $Id:,v 1.5 2005/11/13 14:57:13 rick Exp $



    foo2hp2600-wrapper was written by Rick Richardson <> .

    This manual page was written by Steffen Joeris <>, for the Debian project (but may be used by others).



    Normal Options:
    Printer Tweaking Options:
    Color Tweaking Options:
    Debugging Options:

    Поиск по тексту MAN-ов: 

      Закладки на сайте
      Проследить за страницей
    Created 1996-2017 by Maxim Chirkov  
    Hosting by Ihor