The OpenNET Project / Index page

[ новости /+++ | форум | wiki | теги | ]

Интерактивная система просмотра системных руководств (man-ов)

 ТемаНаборКатегория 
 
 [Cписок руководств | Печать]

audio1575 (7)
  • >> audio1575 (7) ( Solaris man: Макропакеты и соглашения )
  •  

    NAME

    audio1575 - Uli M1575 Super South Bridge audio digital controller interface.
     
    

    DESCRIPTION

    The audio1575 device uses the Uli M1575 AC97-compatible audio digital controller and an AC-97 Codec to implement the audio device interface. This interface allows analog only inputs and outputs.  

    API

    This interface is described in the audio(7I) and mixer(7I) man pages.  

    Driver Versions

    Applications that open /dev/audio may use the AUDIO_GETDEV ioctl(2) to determine which audio device is being used. The audio1575 driver will return the string SUNW,audio1575 in the name field of the audio_device structure. The version field contains the letter a and the config field contains the string onboard1.

    PlatformVer. OutH. Phone SpeakerInMicCD
    Sun A70
    Workstation

    Key to the above table: Ver = Version. Out = Line Out. Speaker = Internal Speaker. In = Line In. Mic. = Microphone. CD = CD-ROM.

    The audio1575 device provides support for the internal speaker, headphone, line out, line in, and microphone. The play.mod_ports and record.mod_ports fields of the audio_info structure (see audio(7I)) indicate which ports may be manipulated.  

    Audio Mixer Mode

    This driver supports the mixer mode. Compat mode is supported only for Sampling Rate (8Khz-48Khz), Encoding (16 Bit linear (PCM)), and Channels (Stereo) configurations.  

    Audio Data Formats

    The audio1575 device natively supports 16-bit linear encodings in stereo. With the mixer enabled, a continuous range of sample rates from 8000 Hz to 48000 Hz is supported. With the mixer disabled, the same sample rates are supported but only for stereo 16 bit linear PCM encoding. The device can be opened for simultaneous play and record whether the mixer is enabled or not.  

    Sample Granularity

    Because the audio1575 device manipulates buffers of audio data, the reported input and output sample counts will vary at any time from the actual sample count by no more than the size of the buffers the driver is transferring. Programs should not rely on the absolute accuracy of the play.samples and record.samples fields of the audio_info structure.  

    Interrupt Rate

    The driver determines how often play and record interrupts should occur. For playing audio, this determines how often and how much audio is requested from the audio mixer. The impact of interrupts on recording is minimal, however, if a very small read buffer size is set, the record interrupt rate should be increased to prevent the buffer from overflowing. You can tune the play and record interrupt rates using the /kernel/drv/audio1575.conf file.  

    Audio Status Change Notification

    As described in the audio(7I) and mixer(7I) man pages, it is possible to request asynchronous notification of changes in the state of an audio device.  

    ERRORS

    All audio1575 errors are described in the audio(7I) man pages.  

    FILES

    /dev/audio

    Symbolic link to the system's primary audio device (not necessarily an audio1575 device).

    /dev/audioctl

    Control device.

    /dev/sound/0

    Represents the first audio device on the system (not necessarily an audio1575 device).

    /dev/sound/0ctl

    Audio control.

    /usr/share/audio/samples

    Audio sample files.

    /kernel/drv/audio1575.conf


     Audio1575 driver configuration file.

     

    ATTRIBUTES

    See attributes(5) for descriptions of the following attributes:

    ATTRIBUTE TYPEATTRIBUTE VALUE

    ArchitectureSPARC-based systems

    Availability

    Stability level

     

    SEE ALSO

    mixerctl(1), sdtaudiocontrol(1), ioctl(2), attributes(5), audio(7I), mixer(7I), streamio(7I)

    Uli M1575 Super South Bridge Data Sheet Data Sheet--- Uli USA Inc.

    AD1981B AC '97 SoundMAX(R) Codec Data Sheet--- Analog Devices Inc.

    http://www.sun.com/io  

    DIAGNOSTICS

    In addition to being logged, the following messages may appear on the system console:

    init_state() play interrupt rate set too low.

    The play interrupt rate specified in audio1575.conf is set too low. It has been reset to the rate specified in the message. Update audio1575.conf to a higher play interrupt rate.

    init_state() play interrupt rate set too high.

    The play interrupt rate specified in audio1575.conf is set too high. It has been reset to the rate specified in the message. Update audio1575.conf to a lower play interrupt rate.

    init_state() record interrupt rate set too low.

    The record interrupt rate specified in audio1575.conf is set too low. It has been reset to the rate specified in the message. Update audio1575.conf to a higher record interrupt rate.

    init_state() record interrupt rate set too high.

    The record interrupt rate specified in audio1575.conf is set too high. It has been reset to the rate specified in the message. Update audio1575.conf to a lower record interrupt rate.


     

    Index

    NAME
    DESCRIPTION
    API
    Driver Versions
    Audio Mixer Mode
    Audio Data Formats
    Sample Granularity
    Interrupt Rate
    Audio Status Change Notification
    ERRORS
    FILES
    ATTRIBUTES
    SEE ALSO
    DIAGNOSTICS


    Поиск по тексту MAN-ов: 




    Партнёры:
    PostgresPro
    Inferno Solutions
    Hosting by Hoster.ru
    Хостинг:

    Закладки на сайте
    Проследить за страницей
    Created 1996-2024 by Maxim Chirkov
    Добавить, Поддержать, Вебмастеру