is an Xorg driver for framebuffer devices. This is a non-accelerated
driver, the following framebuffer depths are supported: 8, 15, 16, 24.
All visual types are supported for depth 8, and TrueColor visual is
supported for the other depths. Multi-head configurations are supported.
driver supports all hardware where a framebuffer driver is available.
fbdev uses the os-specific submodule fbdevhw(4) to talk
to the kernel
device driver. Currently a fbdevhw module is available for linux.
Please refer to xorg.conf(5) for general configuration
details. This section only covers configuration details specific to
For this driver it is not required to specify modes in the screen
section of the config file. The
driver can pick up the currently used video mode from the framebuffer
driver and will use it if there are no video modes configured.
For PCI boards you might have to add a BusID line to the Device
section. See above for a sample line. You can use N'34'Xorg
to figure out the correct values.
The following driver
Option N'34'fbdevN'34' N'34'stringN'34'
The framebuffer device to use. Default: /dev/fb0.
Option N'34'ShadowFBN'34' N'34'booleanN'34'
Enable or disable use of the shadow framebuffer layer. Default: on.
Option N'34'RotateN'34' N'34'stringN'34'
Enable rotation of the display. The supported values are "CW" (clockwise,
90 degrees), "UD" (upside down, 180 degrees) and "CCW" (counter clockwise,
270 degrees). Implies use of the shadow framebuffer layer. Default: off.