Исходное сообщение
"Serial0/3 is up, line protocol is down" Отправлено loewa, 21-Сен-05 09:43
На 2650 ещё стоит модуль с модемами из за него не может быть ??? interface Group-Async0 physical-layer async description Admins ip unnumbered Loopback0 no ip redirects no ip unreachables encapsulation ppp no ip route-cache no ip mroute-cache dialer in-band dialer idle-timeout 0 dialer enable-timeout 6 ntp disable async mode interactive peer default ip address pool Admin_pool compress mppc ppp callback accept ppp authentication pap chap callin no ppp chap wait no group-range ! interface Group-Async1 physical-layer async description For_DynamicAddress_DialUp ip unnumbered Loopback0 encapsulation ppp no ip mroute-cache dialer in-band dialer idle-timeout 0 ntp disable async mode interactive peer default ip address pool dialup_pool compress mppc ppp callback accept ppp authentication pap chap callin no ppp chap wait ! interface Group-Async2 physical-layer async description For_StrangerUsers_DialUp ip unnumbered Loopback0 encapsulation ppp no ip mroute-cache dialer in-band dialer idle-timeout 0 ntp disable async mode interactive peer default ip address pool other_pool compress mppc ppp callback accept ppp authentication pap chap callin no ppp chap wait правда я пробовал его вытаскивать