Исходное сообщение
"не срабатывает 'switchport mode trunk'" Отправлено johnrz, 21-Июл-09 14:53
>sh vlan bre >show vtp > >В общем завести вланы статикой , >show ip int bre >sh span int - транк >Помотреть что на ругой стороне , есть ли промежуточное оборудование между транковыми >линками. switch#sh vlan brief VLAN Name                             Status    Ports ---- -------------------------------- --------- ------------------------------- 1    default                          active    Gi0/7 4    VLAN0004                         active    Gi0/4, Gi0/5, Gi0/6 8    VLAN0008                         active    Gi0/8 10   VLAN0010                         active    Gi0/1, Gi0/2, Gi0/3 1002 fddi-default                     act/unsup 1003 token-ring-default               act/unsup 1004 fddinet-default                  act/unsup 1005 trnet-default                    act/unsup switch#sh vtp status VTP Version                     : running VTP1 (VTP2 capable) Configuration Revision          : 10 Maximum VLANs supported locally : 255 Number of existing VLANs        : 8 VTP Operating Mode              : Server VTP Domain Name                 : VTP Pruning Mode                : Disabled VTP V2 Mode                     : Disabled VTP Traps Generation            : Disabled MD5 digest                      : 0x2F 0xB4 0xFF 0x66 0xB5 0xBD 0x4A 0xAF Configuration last modified by 192.168.0.242 at 3-1-93 00:13:15 Local updater ID is 192.168.0.242 on interface Vl8 (lowest numbered VLAN interface found) switch#sh vtp counters VTP statistics: Summary advertisements received    : 0 Subset advertisements received     : 0 Request advertisements received    : 0 Summary advertisements transmitted : 0 Subset advertisements transmitted  : 0 Request advertisements transmitted : 0 Number of config revision errors   : 0 Number of config digest errors     : 0 Number of V1 summary errors        : 0 VTP pruning statistics: Trunk            Join Transmitted Join Received    Summary advts received from                                                    non-pruning-capable device ---------------- ---------------- ---------------- --------------------------- switch#sh ip int brief Interface              IP-Address      OK? Method Status                Protocol Vlan1                  unassigned      YES NVRAM  up                    down Vlan4                  unassigned      YES NVRAM  up                    up Vlan8                  192.168.0.242   YES NVRAM  up                    up Vlan10                 unassigned      YES NVRAM  up                    up GigabitEthernet0/1     unassigned      YES unset  up                    up GigabitEthernet0/2     unassigned      YES unset  up                    up GigabitEthernet0/3     unassigned      YES unset  down                  down GigabitEthernet0/4     unassigned      YES unset  up                    up GigabitEthernet0/5     unassigned      YES unset  up                    up GigabitEthernet0/6     unassigned      YES unset  up                    up GigabitEthernet0/7     unassigned      YES unset  up                    up GigabitEthernet0/8     unassigned      YES unset  up                    up switch#sh spanning-tree int GigabitEthernet0/7 no spanning tree info available for GigabitEthernet0/7