forum.opennet.ru

Составление сообщения

Исходное сообщение

"H-VPLS не заводится. Подскажите! (+)"
Отправлено Serjios, 18-Фев-09 08:57

>show mpls l2transport vc 293 detail на обоих железках покажите.
на 76-й
Local interface: VFI Managment VFI up
  MPLS VC type is VFI, interworking type is Ethernet
  Destination address: 192.168.1.4, VC ID: 293, VC status: up
    Output interface: none, imposed label stack {267}
    Preferred path: not configured
    Default path: active
    Next hop: Invalid ADDR
  Create time: 2d13h, last status change time: 2d12h
  Signaling protocol: LDP, peer 192.168.1.4:0 up
    Targeted Hello: 192.168.1.1(LDP Id) -> 192.168.1.4
    Status TLV support (local/remote)   : enabled/not supported
      Label/status state machine        : established, LruRru
      Last local dataplane   status rcvd: no fault
      Last local SSS circuit status rcvd: no fault
      Last local SSS circuit status sent: no fault
      Last local  LDP TLV    status sent: no fault
      Last remote LDP TLV    status rcvd: not sent
    MPLS VC labels: local 496, remote 267
    Group ID: local 0, remote 0
    MTU: local 1546, remote 1546
    Remote interface description: Managment
  Sequencing: receive disabled, send disabled
  VC statistics:
    packet totals: receive 0, send 0
    byte totals:   receive 0, send 0
    packet drops:  receive 0, seq error 0, send 0
на каталисте:
Local interface: Vl293 up, line protocol up, Eth VLAN 293 up
  Destination address: 192.168.1.1, VC ID: 293, VC status: up
    Output interface: Vl14, imposed label stack {496}
    Preferred path: not configured
    Default path: active
    Next hop: 10.0.16.221
  Create time: 2d13h, last status change time: 2d12h
  Signaling protocol: LDP, peer 192.168.1.1:0 up
    Targeted Hello: 192.168.1.4(LDP Id) -> 192.168.1.1
    Status TLV support (local/remote)   : enabled/not supported
      Label/status state machine        : established, LruRru
      Last local dataplane   status rcvd: no fault
      Last local SSS circuit status rcvd: no fault
      Last local SSS circuit status sent: no fault
      Last local  LDP TLV    status sent: no fault
      Last remote LDP TLV    status rcvd: no fault
    MPLS VC labels: local 267, remote 496
    Group ID: local n/a, remote 0
    MTU: local 1546, remote 1546
    Remote interface description:
  Sequencing: receive disabled, send disabled
  VC statistics:
    packet totals: receive 0, send 1330
    byte totals:   receive 0, send 90440
    packet drops:  receive 0, send 0

Исходное сообщение
"H-VPLS не заводится. Подскажите! (+)" Отправлено Serjios, 18-Фев-09 08:57
>show mpls l2transport vc 293 detail на обоих железках покажите. на 76-й Local interface: VFI Managment VFI up MPLS VC type is VFI, interworking type is Ethernet Destination address: 192.168.1.4, VC ID: 293, VC status: up Output interface: none, imposed label stack {267} Preferred path: not configured Default path: active Next hop: Invalid ADDR Create time: 2d13h, last status change time: 2d12h Signaling protocol: LDP, peer 192.168.1.4:0 up Targeted Hello: 192.168.1.1(LDP Id) -> 192.168.1.4 Status TLV support (local/remote) : enabled/not supported Label/status state machine : established, LruRru Last local dataplane status rcvd: no fault Last local SSS circuit status rcvd: no fault Last local SSS circuit status sent: no fault Last local LDP TLV status sent: no fault Last remote LDP TLV status rcvd: not sent MPLS VC labels: local 496, remote 267 Group ID: local 0, remote 0 MTU: local 1546, remote 1546 Remote interface description: Managment Sequencing: receive disabled, send disabled VC statistics: packet totals: receive 0, send 0 byte totals: receive 0, send 0 packet drops: receive 0, seq error 0, send 0 на каталисте: Local interface: Vl293 up, line protocol up, Eth VLAN 293 up Destination address: 192.168.1.1, VC ID: 293, VC status: up Output interface: Vl14, imposed label stack {496} Preferred path: not configured Default path: active Next hop: 10.0.16.221 Create time: 2d13h, last status change time: 2d12h Signaling protocol: LDP, peer 192.168.1.1:0 up Targeted Hello: 192.168.1.4(LDP Id) -> 192.168.1.1 Status TLV support (local/remote) : enabled/not supported Label/status state machine : established, LruRru Last local dataplane status rcvd: no fault Last local SSS circuit status rcvd: no fault Last local SSS circuit status sent: no fault Last local LDP TLV status sent: no fault Last remote LDP TLV status rcvd: no fault MPLS VC labels: local 267, remote 496 Group ID: local n/a, remote 0 MTU: local 1546, remote 1546 Remote interface description: Sequencing: receive disabled, send disabled VC statistics: packet totals: receive 0, send 1330 byte totals: receive 0, send 90440 packet drops: receive 0, send 0

Ваше сообщение

Имя*:

EMail:

Для отправки новых сообщений в текущей нити на email укажите знак ! перед адресом, например, !user@host.ru (!! - не показывать email).
Более тонкая настройка отправки ответов производится в профиле зарегистрированного участника форума.

Заголовок*:

Сообщение*:

>>show mpls l2transport vc 293 detail на обоих железках покажите.

> на 76-й 
> Local interface: VFI Managment VFI up 
>   MPLS VC type is VFI, interworking type is Ethernet 
>   Destination address: 192.168.1.4, VC ID: 293, VC status: up 
>     Output interface: none, imposed label stack {267} 
>     Preferred path: not configured 
>     Default path: active 
>     Next hop: Invalid ADDR 
>   Create time: 2d13h, last status change time: 2d12h 
>   Signaling protocol: LDP, peer 192.168.1.4:0 up 
>     Targeted Hello: 192.168.1.1(LDP Id) -> 192.168.1.4 
>     Status TLV support (local/remote)   : enabled/not 
> supported 
>       Label/status state machine    
>     : established, LruRru 
>       Last local dataplane   status 
> rcvd: no fault 
>       Last local SSS circuit status rcvd: 
> no fault 
>       Last local SSS circuit status sent: 
> no fault 
>       Last local  LDP TLV  
>   status sent: no fault 
>       Last remote LDP TLV   
>  status rcvd: not sent 
>     MPLS VC labels: local 496, remote 267 
>     Group ID: local 0, remote 0 
>     MTU: local 1546, remote 1546 
>     Remote interface description: Managment 
>   Sequencing: receive disabled, send disabled 
>   VC statistics: 
>     packet totals: receive 0, send 0 
>     byte totals:   receive 0, send 0 
 
>     packet drops:  receive 0, seq error 0, 
> send 0

> на каталисте:

> Local interface: Vl293 up, line protocol up, Eth VLAN 293 up 
>   Destination address: 192.168.1.1, VC ID: 293, VC status: up 
>     Output interface: Vl14, imposed label stack {496} 
>     Preferred path: not configured 
>     Default path: active 
>     Next hop: 10.0.16.221 
>   Create time: 2d13h, last status change time: 2d12h 
>   Signaling protocol: LDP, peer 192.168.1.1:0 up 
>     Targeted Hello: 192.168.1.4(LDP Id) -> 192.168.1.1 
>     Status TLV support (local/remote)   : enabled/not 
> supported 
>       Label/status state machine    
>     : established, LruRru 
>       Last local dataplane   status 
> rcvd: no fault 
>       Last local SSS circuit status rcvd: 
> no fault 
>       Last local SSS circuit status sent: 
> no fault 
>       Last local  LDP TLV  
>   status sent: no fault 
>       Last remote LDP TLV   
>  status rcvd: no fault 
>     MPLS VC labels: local 267, remote 496 
>     Group ID: local n/a, remote 0 
>     MTU: local 1546, remote 1546 
>     Remote interface description: 
>   Sequencing: receive disabled, send disabled 
>   VC statistics: 
>     packet totals: receive 0, send 1330 
>     byte totals:   receive 0, send 90440 
 
>     packet drops:  receive 0, send 0

При общении не допускается: неуважительное отношение к собеседнику, хамство, унизительное обращение, ненормативная лексика, переход на личности, агрессивное поведение, обесценивание собеседника, провоцирование флейма голословными и заведомо ложными заявлениями. Не отвечайте на сообщения, явно нарушающие правила - удаляются не только сами нарушения, но и все ответы на них. Лог модерирования.

Партнёры:

Хостинг:

Закладки на сайте
Проследить за страницей

Created 1996-2024 by Maxim Chirkov
Добавить, Поддержать, Вебмастеру