Исходное сообщение
"Установка и настройка FreeRadius + Freenibs + Mysql + MPD (radius isp mysql freebsd)" Отправлено WeL, 18-Апр-06 00:40
При попытке конекта # mpd4 Multi-link PPP for FreeBSD, by Archie L. Cobbs. Based on iij-ppp, by Toshiharu OHNO. mpd: pid 669, version 4.0b4 (root@freebsd 22:24 27-Mar-2006) [pptp0] ppp node is "mpd669-pptp0" tcpmss node is "mpd669-mss" mpd: local IP address for PPTP is 0.0.0.0 [pptp0] using interface ng0 mpd: bundle "pptp0" already exists mpd: PPTP connection from 192.168.10.99:1766 pptp0: attached to connection with 192.168.10.99:1766 [pptp0] IFACE: Open event [pptp0] IPCP: Open event [pptp0] IPCP: state change Initial --> Starting [pptp0] IPCP: LayerStart [pptp0] IPCP: Open event [pptp0] bundle: OPEN event in state CLOSED [pptp0] opening link "pptp0"... [pptp0] link: OPEN event [pptp0] LCP: Open event [pptp0] LCP: state change Initial --> Starting [pptp0] LCP: LayerStart [pptp0] device: OPEN event in state DOWN [pptp0] attaching to peer's outgoing call [pptp0] device is now in state OPENING [pptp0] device: UP event in state OPENING [pptp0] device is now in state UP [pptp0] link: UP event [pptp0] link: origination is remote [pptp0] LCP: Up event [pptp0] LCP: state change Starting --> Req-Sent [pptp0] LCP: phase shift DEAD --> ESTABLISH [pptp0] LCP: SendConfigReq #1 ACFCOMP PROTOCOMP MRU 1500 MAGICNUM cc327a6f AUTHPROTO CHAP MSOFTv2 MP MRRU 1600 MP SHORTSEQ ENDPOINTDISC [802.1] 00 0e 2e 2f 84 68 pptp0-0: ignoring SetLinkInfo [pptp0] LCP: rec'd Configure Request #0 link 0 (Req-Sent) MRU 1400 MAGICNUM 19193049 PROTOCOMP ACFCOMP CALLBACK    Not supported [pptp0] LCP: SendConfigRej #0 CALLBACK [pptp0] LCP: rec'd Configure Request #1 link 0 (Req-Sent) MRU 1400 MAGICNUM 19193049 PROTOCOMP ACFCOMP [pptp0] LCP: SendConfigAck #1 MRU 1400 MAGICNUM 19193049 PROTOCOMP ACFCOMP [pptp0] LCP: state change Req-Sent --> Ack-Sent [pptp0] LCP: SendConfigReq #2 ACFCOMP PROTOCOMP MRU 1500 MAGICNUM cc327a6f AUTHPROTO CHAP MSOFTv2 MP MRRU 1600 MP SHORTSEQ ENDPOINTDISC [802.1] 00 0e 2e 2f 84 68 [pptp0] LCP: rec'd Configure Reject #2 link 0 (Ack-Sent) MP MRRU 1600 MP SHORTSEQ ENDPOINTDISC [802.1] 00 0e 2e 2f 84 68 [pptp0] LCP: SendConfigReq #3 ACFCOMP PROTOCOMP MRU 1500 MAGICNUM cc327a6f AUTHPROTO CHAP MSOFTv2 [pptp0] LCP: rec'd Configure Ack #3 link 0 (Ack-Sent) ACFCOMP PROTOCOMP MRU 1500 MAGICNUM cc327a6f AUTHPROTO CHAP MSOFTv2 [pptp0] LCP: state change Ack-Sent --> Opened [pptp0] LCP: phase shift ESTABLISH --> AUTHENTICATE [pptp0] LCP: auth: peer wants nothing, I want CHAP [pptp0] CHAP: sending CHALLENGE len:17 [pptp0] LCP: LayerUp pptp0-0: ignoring SetLinkInfo [pptp0] LCP: rec'd Ident #2 link 0 (Opened) MESG: MSRASV5.10 [pptp0] LCP: rec'd Ident #3 link 0 (Opened) MESG: MSRAS-0-SLIB [pptp0] CHAP: rec'd RESPONSE #1 Name: "w" [pptp0] AUTH: Auth-Thread started [pptp0] AUTH: Trying secret file: mpd.secret Peer name: "w" mpd: warning: line too long, truncated User "w" not found in secret file [pptp0] AUTH: Auth-Thread finished normally [pptp0] CHAP: ChapInputFinish: status failed [pptp0] CHAP: sending FAILURE len:29 [pptp0] LCP: authorization failed [pptp0] device: CLOSE event in state UP pptp0-0: clearing call pptp0-0: killing channel [pptp0] PPTP call terminated [pptp0] IFACE: Close event [pptp0] IPCP: Close event [pptp0] IPCP: state change Starting --> Initial [pptp0] IPCP: LayerFinish [pptp0] IFACE: Close event pptp0: closing connection with 192.168.10.99:1766 [pptp0] IFACE: Close event [pptp0] device is now in state CLOSING [pptp0] bundle: CLOSE event in state OPENED [pptp0] closing link "pptp0"... [pptp0] device: DOWN event in state CLOSING [pptp0] device is now in state DOWN [pptp0] link: CLOSE event [pptp0] LCP: Close event [pptp0] LCP: state change Opened --> Closing [pptp0] LCP: phase shift AUTHENTICATE --> TERMINATE [pptp0] LCP: SendTerminateReq #4 [pptp0] error writing len 8 frame to bypass: Network is down [pptp0] LCP: LayerDown pptp0: killing connection with 192.168.10.99:1766 [pptp0] device: DOWN event in state DOWN [pptp0] device is now in state DOWN [pptp0] link: DOWN event [pptp0] LCP: Down event [pptp0] LCP: LayerFinish [pptp0] LCP: state change Closing --> Initial [pptp0] LCP: phase shift TERMINATE --> DEAD [pptp0] device: CLOSE event in state DOWN [pptp0] device is now in state DOWN [pptp0] link: DOWN event [pptp0] LCP: Down event # radiusd -x ..... Listening on authentication *:1812 Listening on accounting *:1813 Listening on proxy *:1814 Ready to process requests.

Ваше сообщение
Имя*:
EMail:	Для отправки ответов на email укажите знак ! перед адресом, например, !user@host.ru (!! - не показывать email). Более тонкая настройка отправки ответов производится в профиле зарегистрированного участника форума.
Заголовок*:
Сообщение*:	> При попытке конекта > # mpd4 > Multi-link PPP for FreeBSD, by Archie L. Cobbs. > Based on iij-ppp, by Toshiharu OHNO. > mpd: pid 669, version 4.0b4 (root@freebsd 22:24 27-Mar-2006) > [pptp0] ppp node is "mpd669-pptp0" > tcpmss node is "mpd669-mss" > mpd: local IP address for PPTP is 0.0.0.0 > [pptp0] using interface ng0 > mpd: bundle "pptp0" already exists > mpd: PPTP connection from 192.168.10.99:1766 > pptp0: attached to connection with 192.168.10.99:1766 > [pptp0] IFACE: Open event > [pptp0] IPCP: Open event > [pptp0] IPCP: state change Initial --> Starting > [pptp0] IPCP: LayerStart > [pptp0] IPCP: Open event > [pptp0] bundle: OPEN event in state CLOSED > [pptp0] opening link "pptp0"... > [pptp0] link: OPEN event > [pptp0] LCP: Open event > [pptp0] LCP: state change Initial --> Starting > [pptp0] LCP: LayerStart > [pptp0] device: OPEN event in state DOWN > [pptp0] attaching to peer's outgoing call > [pptp0] device is now in state OPENING > [pptp0] device: UP event in state OPENING > [pptp0] device is now in state UP > [pptp0] link: UP event > [pptp0] link: origination is remote > [pptp0] LCP: Up event > [pptp0] LCP: state change Starting --> Req-Sent > [pptp0] LCP: phase shift DEAD --> ESTABLISH > [pptp0] LCP: SendConfigReq #1 > ACFCOMP > PROTOCOMP > MRU 1500 > MAGICNUM cc327a6f > AUTHPROTO CHAP MSOFTv2 > MP MRRU 1600 > MP SHORTSEQ > ENDPOINTDISC [802.1] 00 0e 2e 2f 84 68 > pptp0-0: ignoring SetLinkInfo > [pptp0] LCP: rec'd Configure Request #0 link 0 (Req-Sent) > MRU 1400 > MAGICNUM 19193049 > PROTOCOMP > ACFCOMP > CALLBACK > Not supported > [pptp0] LCP: SendConfigRej #0 > CALLBACK > [pptp0] LCP: rec'd Configure Request #1 link 0 (Req-Sent) > MRU 1400 > MAGICNUM 19193049 > PROTOCOMP > ACFCOMP > [pptp0] LCP: SendConfigAck #1 > MRU 1400 > MAGICNUM 19193049 > PROTOCOMP > ACFCOMP > [pptp0] LCP: state change Req-Sent --> Ack-Sent > [pptp0] LCP: SendConfigReq #2 > ACFCOMP > PROTOCOMP > MRU 1500 > MAGICNUM cc327a6f > AUTHPROTO CHAP MSOFTv2 > MP MRRU 1600 > MP SHORTSEQ > ENDPOINTDISC [802.1] 00 0e 2e 2f 84 68 > [pptp0] LCP: rec'd Configure Reject #2 link 0 (Ack-Sent) > MP MRRU 1600 > MP SHORTSEQ > ENDPOINTDISC [802.1] 00 0e 2e 2f 84 68 > [pptp0] LCP: SendConfigReq #3 > ACFCOMP > PROTOCOMP > MRU 1500 > MAGICNUM cc327a6f > AUTHPROTO CHAP MSOFTv2 > [pptp0] LCP: rec'd Configure Ack #3 link 0 (Ack-Sent) > ACFCOMP > PROTOCOMP > MRU 1500 > MAGICNUM cc327a6f > AUTHPROTO CHAP MSOFTv2 > [pptp0] LCP: state change Ack-Sent --> Opened > [pptp0] LCP: phase shift ESTABLISH --> AUTHENTICATE > [pptp0] LCP: auth: peer wants nothing, I want CHAP > [pptp0] CHAP: sending CHALLENGE len:17 > [pptp0] LCP: LayerUp > pptp0-0: ignoring SetLinkInfo > [pptp0] LCP: rec'd Ident #2 link 0 (Opened) > MESG: MSRASV5.10 > [pptp0] LCP: rec'd Ident #3 link 0 (Opened) > MESG: MSRAS-0-SLIB > [pptp0] CHAP: rec'd RESPONSE #1 > Name: "w" > [pptp0] AUTH: Auth-Thread started > [pptp0] AUTH: Trying secret file: mpd.secret > Peer name: "w" > mpd: warning: line too long, truncated > User "w" not found in secret file > [pptp0] AUTH: Auth-Thread finished normally > [pptp0] CHAP: ChapInputFinish: status failed > [pptp0] CHAP: sending FAILURE len:29 > [pptp0] LCP: authorization failed > [pptp0] device: CLOSE event in state UP > pptp0-0: clearing call > pptp0-0: killing channel > [pptp0] PPTP call terminated > [pptp0] IFACE: Close event > [pptp0] IPCP: Close event > [pptp0] IPCP: state change Starting --> Initial > [pptp0] IPCP: LayerFinish > [pptp0] IFACE: Close event > pptp0: closing connection with 192.168.10.99:1766 > [pptp0] IFACE: Close event > [pptp0] device is now in state CLOSING > [pptp0] bundle: CLOSE event in state OPENED > [pptp0] closing link "pptp0"... > [pptp0] device: DOWN event in state CLOSING > [pptp0] device is now in state DOWN > [pptp0] link: CLOSE event > [pptp0] LCP: Close event > [pptp0] LCP: state change Opened --> Closing > [pptp0] LCP: phase shift AUTHENTICATE --> TERMINATE > [pptp0] LCP: SendTerminateReq #4 > [pptp0] error writing len 8 frame to bypass: Network is down > [pptp0] LCP: LayerDown > pptp0: killing connection with 192.168.10.99:1766 > [pptp0] device: DOWN event in state DOWN > [pptp0] device is now in state DOWN > [pptp0] link: DOWN event > [pptp0] LCP: Down event > [pptp0] LCP: LayerFinish > [pptp0] LCP: state change Closing --> Initial > [pptp0] LCP: phase shift TERMINATE --> DEAD > [pptp0] device: CLOSE event in state DOWN > [pptp0] device is now in state DOWN > [pptp0] link: DOWN event > [pptp0] LCP: Down event > # radiusd -x > ..... > Listening on authentication *:1812 > Listening on accounting *:1813 > Listening on proxy *:1814 > Ready to process requests.
	Введите код, изображенный на картинке: