> показывает что якобы одинМожет быть, OS показывает то, что ей отдает raid controller, а отдает он индентификатор уже готового массива, который и определяется, как один диск.
> это что за диск/и SSD?
Диски наверняка SATA, SSD ещё не бывают такого объема, судя по Яндекс-Маркету.
> # atacontrol cap ad4
Protocol SATA revision 2.x
device model MARVELL Raid VD 0
serial number 642d14ba78260010
firmware revision MV.R00-0
cylinders 16383
heads 16
sectors/track 63
lba supported 268435455 sectors
lba48 supported 3904897024 sectors
dma supported
overlap supported
Feature Support Enable Value Vendor
write cache yes yes
read ahead yes yes
Native Command Queuing (NCQ) yes - 31/0x1F
Tagged Command Queuing (TCQ) no no 31/0x1F
SMART no no
microcode download no no
security no no
power management yes yes
advanced power management no no 0/0x00
automatic acoustic management no no 0/0x00 254/0xFE
> # cat /var/run/dmesg.boot
Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.1-RELEASE #0: Tue May 1 16:48:52 NOVST 2012
root@mydomain.ru:/usr/obj/usr/src/sys/MONITOR amd64
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Phenom(tm) II X6 1055T Processor (2812.46-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0x100fa0 Family = 10 Model = a Stepping = 0
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x802009<SSE3,MON,CX16,POPCNT>
AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!>
AMD Features2=0x37ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT>
TSC: P-state invariant
real memory = 4294967296 (4096 MB)
avail memory = 4104982528 (3914 MB)
ACPI APIC Table: <GBT GBTUACPI>
FreeBSD/SMP: Multiprocessor System Detected: 6 CPUs
FreeBSD/SMP: 1 package(s) x 6 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
cpu4 (AP): APIC ID: 4
cpu5 (AP): APIC ID: 5
ioapic0: Changing APIC ID to 2
ioapic0 <Version 2.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <GBT GBTUACPI> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, cfce0000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 18 at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xee00-0xeeff mem 0xd0000000-0xdfffffff,0xfddc0000-0xfdddffff irq 18 at device 0.0 on pci1
pci1: <multimedia, HDA> at device 0.1 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 4.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pci2: <serial bus, USB> at device 0.0 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> irq 17 at device 5.0 on pci0
pci3: <ACPI PCI bus> on pcib3
atapci0: <Marvell AHCI controller> port 0xcf00-0xcf07,0xce00-0xce03,0xcd00-0xcd07,0xcc00-0xcc03,0xcb00-0xcb0f mem 0xfdaff000-0xfdaff7ff irq 17 at device 0.0 on pci3
atapci0: [ITHREAD]
atapci0: AHCI v1.20 controller with 8 6Gbps ports, PM not supported
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci0
ata4: [ITHREAD]
ata5: <ATA channel 3> on atapci0
ata5: [ITHREAD]
ata6: <ATA channel 4> on atapci0
ata6: [ITHREAD]
ata7: <ATA channel 5> on atapci0
ata7: [ITHREAD]
ata8: <ATA channel 6> on atapci0
ata8: [ITHREAD]
ata9: <ATA channel 7> on atapci0
ata9: [ITHREAD]
pcib4: <ACPI PCI-PCI bridge> irq 19 at device 7.0 on pci0
pci4: <ACPI PCI bus> on pcib4
re0: <RealTek 8168/8111 B/C/CP/D/DP/E PCIe Gigabit Ethernet> port 0xbe00-0xbeff mem 0xfd7ff000-0xfd7fffff,0xfd7f8000-0xfd7fbfff irq 19 at device 0.0 on pci4
re0: Using 1 MSI messages
re0: Chip rev. 0x28000000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
re0: Ethernet address: 6c:f0:49:55:03:08
re0: [FILTER]
pcib5: <ACPI PCI-PCI bridge> irq 17 at device 9.0 on pci0
pci5: <ACPI PCI bus> on pcib5
re1: <RealTek 8168/8111 B/C/CP/D/DP/E PCIe Gigabit Ethernet> port 0xae00-0xaeff mem 0xfd3ff000-0xfd3fffff,0xfd3f8000-0xfd3fbfff irq 17 at device 0.0 on pci5
re1: Using 1 MSI messages
re1: Chip rev. 0x28000000
re1: MAC rev. 0x00000000
miibus1: <MII bus> on re1
rgephy1: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus1
rgephy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
re1: Ethernet address: 6c:f0:49:55:03:06
re1: [FILTER]
pcib6: <ACPI PCI-PCI bridge> irq 18 at device 10.0 on pci0
pci6: <ACPI PCI bus> on pcib6
atapci1: <JMicron JMB363 UDMA133 controller> port 0x9f00-0x9f07,0x9e00-0x9e03,0x9d00-0x9d07,0x9c00-0x9c03,0x9b00-0x9b0f mem 0xfdffe000-0xfdffffff irq 18 at device 0.0 on pci6
atapci1: [ITHREAD]
atapci2: <AHCI SATA controller> on atapci1
atapci2: [ITHREAD]
atapci2: AHCI v1.00 controller with 2 3Gbps ports, PM supported
ata10: <ATA channel 0> on atapci2
ata10: [ITHREAD]
ata11: <ATA channel 1> on atapci2
ata11: [ITHREAD]
ata12: <ATA channel 0> on atapci1
ata12: [ITHREAD]
atapci3: <ATI IXP700/800 SATA300 controller> port 0xff00-0xff07,0xfe00-0xfe03,0xfd00-0xfd07,0xfc00-0xfc03,0xfb00-0xfb0f mem 0xfe02f000-0xfe02f3ff irq 22 at device 17.0 on pci0
atapci3: [ITHREAD]
atapci3: AHCI v1.10 controller with 6 3Gbps ports, PM supported
ata13: <ATA channel 0> on atapci3
ata13: [ITHREAD]
ata14: <ATA channel 1> on atapci3
ata14: [ITHREAD]
ata15: <ATA channel 2> on atapci3
ata15: [ITHREAD]
ata16: <ATA channel 3> on atapci3
ata16: [ITHREAD]
ata17: <ATA channel 4> on atapci3
ata17: [ITHREAD]
ata18: <ATA channel 5> on atapci3
ata18: [ITHREAD]
ohci0: <OHCI (generic) USB controller> mem 0xfe02e000-0xfe02efff irq 16 at device 18.0 on pci0
ohci0: [ITHREAD]
usbus0: <OHCI (generic) USB controller> on ohci0
ohci1: <OHCI (generic) USB controller> mem 0xfe02d000-0xfe02dfff irq 16 at device 18.1 on pci0
ohci1: [ITHREAD]
usbus1: <OHCI (generic) USB controller> on ohci1
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe02c000-0xfe02c0ff irq 17 at device 18.2 on pci0
ehci0: [ITHREAD]
usbus2: EHCI version 1.0
usbus2: <EHCI (generic) USB 2.0 controller> on ehci0
ohci2: <OHCI (generic) USB controller> mem 0xfe02b000-0xfe02bfff irq 18 at device 19.0 on pci0
ohci2: [ITHREAD]
usbus3: <OHCI (generic) USB controller> on ohci2
ohci3: <OHCI (generic) USB controller> mem 0xfe02a000-0xfe02afff irq 18 at device 19.1 on pci0
ohci3: [ITHREAD]
usbus4: <OHCI (generic) USB controller> on ohci3
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfe029000-0xfe0290ff irq 19 at device 19.2 on pci0
ehci1: [ITHREAD]
usbus5: EHCI version 1.0
usbus5: <EHCI (generic) USB 2.0 controller> on ehci1
intsmb0: <AMD SB600/700/710/750 SMBus Controller> at device 20.0 on pci0
intsmb0: intr SMI enabled revision 0
intsmb0: using polling mode when configured interrupt is SMI
smbus0: <System Management Bus> on intsmb0
smb0: <SMBus generic I/O> on smbus0
atapci4: <ATI IXP700/800 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfa00-0xfa0f at device 20.1 on pci0
ata0: <ATA channel 0> on atapci4
ata0: [ITHREAD]
pci0: <multimedia, HDA> at device 20.2 (no driver attached)
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib7: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci7: <ACPI PCI bus> on pcib7
ohci4: <OHCI (generic) USB controller> mem 0xfe028000-0xfe028fff irq 18 at device 20.5 on pci0
ohci4: [ITHREAD]
usbus6: <OHCI (generic) USB controller> on ohci4
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppc0: [ITHREAD]
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: [ITHREAD]
lpt0: <Printer> on ppbus0
lpt0: [ITHREAD]
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
atrtc0: <AT realtime clock> port 0x70-0x73 on acpi0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xce7ff,0xd0000-0xd2fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 480Mbps High Speed USB v2.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 480Mbps High Speed USB v2.0
usbus6: 12Mbps Full Speed USB v1.0
ad4: 1906688MB <MARVELL Raid VD 0 MV.R00-0> at ata2-master UDMA100 SATA 1.5Gb/s
ugen0.1: <ATI> at usbus0
uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <ATI> at usbus1
uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <ATI> at usbus2
uhub2: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ugen3.1: <ATI> at usbus3
uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <ATI> at usbus4
uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <ATI> at usbus5
uhub5: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
ugen6.1: <ATI> at usbus6
uhub6: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
SMP: AP CPU #5 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #2 Launched!
Root mount waiting for: usbus6 usbus5 usbus4 usbus3 usbus2 usbus1 usbus0
uhub6: 2 ports with 2 removable, self powered
uhub0: 3 ports with 3 removable, self powered
uhub1: 3 ports with 3 removable, self powered
uhub3: 3 ports with 3 removable, self powered
uhub4: 3 ports with 3 removable, self powered
Root mount waiting for: usbus5 usbus2
Root mount waiting for: usbus5 usbus2
uhub2: 6 ports with 6 removable, self powered
uhub5: 6 ports with 6 removable, self powered
Trying to mount root from ufs:/dev/ad4s1a
> # pciconf -lv
hostb0@pci0:0:0:0: class=0x060000 card=0x59561002 chip=0x59561002 rev=0x00 hdr=0x00
vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
device = 'RD790 GFX Dual Slot'
class = bridge
subclass = HOST-PCI
pcib1@pci0:0:2:0: class=0x060400 card=0x59561002 chip=0x59781002 rev=0x00 hdr=0x01
vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
device = 'RD790 PCI to PCI bridge (external gfx0 port A)'
class = bridge
subclass = PCI-PCI
pcib2@pci0:0:4:0: class=0x060400 card=0x59561002 chip=0x597a1002 rev=0x00 hdr=0x01
vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
device = 'RD790 PCI to PCI bridge (PCIe gpp port A)'
class = bridge
subclass = PCI-PCI
pcib3@pci0:0:5:0: class=0x060400 card=0x59561002 chip=0x597b1002 rev=0x00 hdr=0x01
vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
device = 'RD790 PCI to PCI bridge (PCIe gpp port B)'
class = bridge
subclass = PCI-PCI
pcib4@pci0:0:7:0: class=0x060400 card=0x59561002 chip=0x597d1002 rev=0x00 hdr=0x01
vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
device = 'RD790 PCI to PCI bridge (PCIe gpp port D)'
class = bridge
subclass = PCI-PCI
pcib5@pci0:0:9:0: class=0x060400 card=0x59561002 chip=0x597e1002 rev=0x00 hdr=0x01
vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
device = 'RD790 PCI to PCI bridge (PCIe gpp port E)'
class = bridge
subclass = PCI-PCI
pcib6@pci0:0:10:0: class=0x060400 card=0x59561002 chip=0x597f1002 rev=0x00 hdr=0x01
vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
device = 'RD790 PCI to PCI bridge (PCIe gpp port F)'
class = bridge
subclass = PCI-PCI
atapci3@pci0:0:17:0: class=0x010601 card=0xb0021458 chip=0x43911002 rev=0x00 hdr=0x00
vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
device = 'SB700 SATA Controller [AHCI mode]'
class = mass storage
subclass = SATA
ohci0@pci0:0:18:0: class=0x0c0310 card=0x50041458 chip=0x43971002 rev=0x00 hdr=0x00
vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
device = 'SB700 USB OHCI0 Controller'
class = serial bus
subclass = USB
ohci1@pci0:0:18:1: class=0x0c0310 card=0x50041458 chip=0x43981002 rev=0x00 hdr=0x00
vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
device = 'Standard OpenHCD USB-Hostcontroller (SB700)'
class = serial bus
subclass = USB
ehci0@pci0:0:18:2: class=0x0c0320 card=0x50041458 chip=0x43961002 rev=0x00 hdr=0x00
vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
device = 'SB700 USB EHCI Controller'
class = serial bus
subclass = USB
ohci2@pci0:0:19:0: class=0x0c0310 card=0x50041458 chip=0x43971002 rev=0x00 hdr=0x00
vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
device = 'SB700 USB OHCI0 Controller'
class = serial bus
subclass = USB
ohci3@pci0:0:19:1: class=0x0c0310 card=0x50041458 chip=0x43981002 rev=0x00 hdr=0x00
vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
device = 'Standard OpenHCD USB-Hostcontroller (SB700)'
class = serial bus
subclass = USB
ehci1@pci0:0:19:2: class=0x0c0320 card=0x50041458 chip=0x43961002 rev=0x00 hdr=0x00
vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
device = 'SB700 USB EHCI Controller'
class = serial bus
subclass = USB
intsmb0@pci0:0:20:0: class=0x0c0500 card=0x43851458 chip=0x43851002 rev=0x3c hdr=0x00
vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
device = 'ATI SMBus (ATI RD600/RS600)'
class = serial bus
subclass = SMBus
atapci4@pci0:0:20:1: class=0x01018a card=0x50021458 chip=0x439c1002 rev=0x00 hdr=0x00
vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
device = 'PATA 133 Controller (SB7xx)'
class = mass storage
subclass = ATA
none0@pci0:0:20:2: class=0x040300 card=0xa1021458 chip=0x43831002 rev=0x00 hdr=0x00
vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
device = 'IXP SB600 High Definition Audio Controller'
class = multimedia
subclass = HDA
isab0@pci0:0:20:3: class=0x060100 card=0x439d1002 chip=0x439d1002 rev=0x00 hdr=0x00
vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
device = 'SB700 LPC host controller'
class = bridge
subclass = PCI-ISA
pcib7@pci0:0:20:4: class=0x060401 card=0x00000000 chip=0x43841002 rev=0x00 hdr=0x01
vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
device = 'IXP SB600 PCI to PCI Bridge'
class = bridge
subclass = PCI-PCI
ohci4@pci0:0:20:5: class=0x0c0310 card=0x50041458 chip=0x43991002 rev=0x00 hdr=0x00
vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
device = 'SB700 USB OHCI2 Controller'
class = serial bus
subclass = USB
hostb1@pci0:0:24:0: class=0x060000 card=0x00000000 chip=0x12001022 rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices (AMD)'
device = '(Family 10h) Athlon64/Opteron/Sempron HyperTransport Technology Configuration'
class = bridge
subclass = HOST-PCI
hostb2@pci0:0:24:1: class=0x060000 card=0x00000000 chip=0x12011022 rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices (AMD)'
device = '(Family 10h) Athlon64/Opteron/Sempron Address Map'
class = bridge
subclass = HOST-PCI
hostb3@pci0:0:24:2: class=0x060000 card=0x00000000 chip=0x12021022 rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices (AMD)'
device = '(Family 10h) Athlon64/Opteron/Sempron DRAM Controller'
class = bridge
subclass = HOST-PCI
hostb4@pci0:0:24:3: class=0x060000 card=0x00000000 chip=0x12031022 rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices (AMD)'
device = '(Family 10h) Athlon64/Opteron/Sempron Miscellaneous Control'
class = bridge
subclass = HOST-PCI
hostb5@pci0:0:24:4: class=0x060000 card=0x00000000 chip=0x12041022 rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices (AMD)'
device = '(Family 10h) Athlon64/Opteron/Sempron Link Control'
class = bridge
subclass = HOST-PCI
vgapci0@pci0:1:0:0: class=0x030000 card=0xe134174b chip=0x68f91002 rev=0x00 hdr=0x00
vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
class = display
subclass = VGA
none1@pci0:1:0:1: class=0x040300 card=0xaa68174b chip=0xaa681002 rev=0x00 hdr=0x00
vendor = 'ATI Technologies Inc. / Advanced Micro Devices, Inc.'
class = multimedia
subclass = HDA
none2@pci0:2:0:0: class=0x0c0330 card=0x50071458 chip=0x01941033 rev=0x03 hdr=0x00
vendor = 'NEC Electronics Hong Kong'
class = serial bus
subclass = USB
atapci0@pci0:3:0:0: class=0x010601 card=0xb0001458 chip=0x91281b4b rev=0x11 hdr=0x00
class = mass storage
subclass = SATA
re0@pci0:4:0:0: class=0x020000 card=0xe0001458 chip=0x816810ec rev=0x03 hdr=0x00
vendor = 'Realtek Semiconductor'
device = 'Gigabit Ethernet NIC(NDIS 6.0) (RTL8168/8111/8111c)'
class = network
subclass = ethernet
re1@pci0:5:0:0: class=0x020000 card=0xe0001458 chip=0x816810ec rev=0x03 hdr=0x00
vendor = 'Realtek Semiconductor'
device = 'Gigabit Ethernet NIC(NDIS 6.0) (RTL8168/8111/8111c)'
class = network
subclass = ethernet
atapci1@pci0:6:0:0: class=0x010601 card=0xb0001458 chip=0x2363197b rev=0x03 hdr=0x00
vendor = 'JMicron Technology Corp.'
device = 'JMicron JMB362/JMB363 AHCI Controller (JMB36X)'
class = mass storage
subclass = SATA
