forum.opennet.ru

Составление сообщения

Исходное сообщение

"проблемас винтами "
Отправлено andreo, 22-Апр-09 21:11

Добрый день,
7o# uname -v
FreeBSD 7.2-PRERELEASE #0: Sat Apr 18 12:11:30 MSD 2009
недавно обновил...
начались проблемы :
1 в логах начала появляться запись
Apr 22 18:20:02 7o kernel: kern.maxfiles limit exceeded by uid 80, please see tuning(7).
Apr 22 18:20:04 7o kernel: kern.maxfiles limit exceeded by uid 0, please see tuning(7).
Apr 22 18:20:05 7o kernel: kern.maxfiles limit exceeded by uid 0, please see tuning(7).
Apr 22 18:20:06 7o kernel: kern.maxfiles limit exceeded by uid 53, please see tuning(7).

2 Apr 22 18:08:02 7o kernel: ad10: WARNING - SETFEATURES SET TRANSFER MODE taskqueue timeout - completing request directly
Apr 22 18:08:06 7o kernel: ad10: WARNING - SETFEATURES ENABLE RCACHE taskqueue timeout - completing request directly
Apr 22 18:08:10 7o kernel: ad10: WARNING - SETFEATURES ENABLE WCACHE taskqueue timeout - completing request directly
Apr 22 18:08:14 7o kernel: ad10: WARNING - SET_MULTI taskqueue timeout - completing request directly
Apr 22 18:08:14 7o kernel: ad10: TIMEOUT - READ_DMA48 retrying (1 retry left) LBA=961890607
Apr 22 18:08:18 7o kernel: ad6: WARNING - SETFEATURES SET TRANSFER MODE taskqueue timeout - completing request directly
Apr 22 18:08:22 7o kernel: ad6: WARNING - SETFEATURES SET TRANSFER MODE taskqueue timeout - completing request directly
Apr 22 18:08:26 7o kernel: ad6: WARNING - SETFEATURES ENABLE RCACHE taskqueue timeout - completing request directly
Apr 22 18:08:30 7o kernel: ad6: WARNING - SETFEATURES ENABLE WCACHE taskqueue timeout - completing request directly
Apr 22 18:08:34 7o kernel: ad6: WARNING - SET_MULTI taskqueue timeout - completing request directly
Apr 22 18:08:34 7o kernel: ad6: TIMEOUT - READ_DMA retrying (1 retry left) LBA=259316831
Apr 22 18:08:38 7o kernel: ad4: WARNING - SETFEATURES SET TRANSFER MODE taskqueue timeout - completing request directly
Apr 22 18:08:42 7o kernel: ad4: WARNING - SETFEATURES SET TRANSFER MODE taskqueue timeout - completing request directly
до этого такого не было ((
почитал про пункт номер 2,проблем с винтами ранее не было ((
7o# df -h
Filesystem                           Size    Used   Avail Capacity  Mounted on
/dev/ad0s1a                          496M    335M    121M    74%    /
devfs                                1.0K    1.0K      0B   100%    /dev
/dev/ad0s1e                          496M     28M    428M     6%    /tmp
/dev/ad0s1f                           68G    6.3G     56G    10%    /usr
/dev/ad0s1d                          1.7G    955M    628M    60%    /var
/dev/ad12s1f                         672G    578G     40G    94%    /shares/hd1
/dev/ad14s1f                         672G    554G     64G    90%    /shares/hd2
/dev/ar0s1d                          451G    333G     82G    80%    /shares/hd3
/dev/ar1s1f                          897G    752G     74G    91%    /shares/hd4

7o# atacontrol list
ATA channel 0:
    Master:  ad0 <MAXTOR STM3802110A/3.AAK> ATA/ATAPI revision 7
    Slave:       no device present
ATA channel 1:
    Master:      no device present
    Slave:       no device present
ATA channel 2:
    Master:  ad4 <ST3250820AS/3.AAC> SATA revision 1.x
    Slave:       no device present
ATA channel 3:
    Master:  ad6 <ST3250820AS/3.AAC> SATA revision 1.x
    Slave:       no device present
ATA channel 4:
    Master:  ad8 <ST3500630AS/3.AAC> SATA revision 2.x
    Slave:       no device present
ATA channel 5:
    Master: ad10 <ST3500630AS/3.AAC> SATA revision 2.x
    Slave:       no device present
ATA channel 6:
    Master: ad12 <ST3750640AS/3.AAE> SATA revision 1.x
    Slave:       no device present
ATA channel 7:
    Master: ad14 <ST3750640AS/3.AAE> SATA revision 1.x
    Slave:       no device present

7o# atacontrol cap ad10
Protocol              SATA revision 2.x
device model          ST3500630AS
serial number         5QG18LV4
firmware revision     3.AAC
cylinders             16383
heads                 16
sectors/track         63
lba supported         268435455 sectors
lba48 supported       976773168 sectors
dma supported
overlap not supported
Feature                      Support  Enable    Value           Vendor
write cache                    yes      yes
read ahead                     yes      yes
Native Command Queuing (NCQ)   yes       -      31/0x1F
Tagged Command Queuing (TCQ)   no       no      31/0x1F
SMART                          yes      yes
microcode download             yes      yes
security                       yes      no
power management               yes      yes
advanced power management      no       no      65278/0xFEFE
automatic acoustic management  no       no      0/0x00  254/0xFE

7o# atacontrol cap ad4
Protocol              SATA revision 1.x
device model          ST3250820AS
serial number         5QEZ067B
firmware revision     3.AAC
cylinders             16383
heads                 16
sectors/track         63
lba supported         268435455 sectors
lba48 supported       488397168 sectors
dma supported
overlap not supported
Feature                      Support  Enable    Value           Vendor
write cache                    yes      yes
read ahead                     yes      yes
Native Command Queuing (NCQ)   yes       -      31/0x1F
Tagged Command Queuing (TCQ)   no       no      31/0x1F
SMART                          yes      yes
microcode download             yes      yes
security                       yes      no
power management               yes      yes
advanced power management      no       no      65278/0xFEFE
automatic acoustic management  no       no      0/0x00  254/0xFE

что можете посоветовать ?

Исходное сообщение
"проблемас винтами " Отправлено andreo, 22-Апр-09 21:11
Добрый день, 7o# uname -v FreeBSD 7.2-PRERELEASE #0: Sat Apr 18 12:11:30 MSD 2009 недавно обновил... начались проблемы : 1 в логах начала появляться запись Apr 22 18:20:02 7o kernel: kern.maxfiles limit exceeded by uid 80, please see tuning(7). Apr 22 18:20:04 7o kernel: kern.maxfiles limit exceeded by uid 0, please see tuning(7). Apr 22 18:20:05 7o kernel: kern.maxfiles limit exceeded by uid 0, please see tuning(7). Apr 22 18:20:06 7o kernel: kern.maxfiles limit exceeded by uid 53, please see tuning(7). 2 Apr 22 18:08:02 7o kernel: ad10: WARNING - SETFEATURES SET TRANSFER MODE taskqueue timeout - completing request directly Apr 22 18:08:06 7o kernel: ad10: WARNING - SETFEATURES ENABLE RCACHE taskqueue timeout - completing request directly Apr 22 18:08:10 7o kernel: ad10: WARNING - SETFEATURES ENABLE WCACHE taskqueue timeout - completing request directly Apr 22 18:08:14 7o kernel: ad10: WARNING - SET_MULTI taskqueue timeout - completing request directly Apr 22 18:08:14 7o kernel: ad10: TIMEOUT - READ_DMA48 retrying (1 retry left) LBA=961890607 Apr 22 18:08:18 7o kernel: ad6: WARNING - SETFEATURES SET TRANSFER MODE taskqueue timeout - completing request directly Apr 22 18:08:22 7o kernel: ad6: WARNING - SETFEATURES SET TRANSFER MODE taskqueue timeout - completing request directly Apr 22 18:08:26 7o kernel: ad6: WARNING - SETFEATURES ENABLE RCACHE taskqueue timeout - completing request directly Apr 22 18:08:30 7o kernel: ad6: WARNING - SETFEATURES ENABLE WCACHE taskqueue timeout - completing request directly Apr 22 18:08:34 7o kernel: ad6: WARNING - SET_MULTI taskqueue timeout - completing request directly Apr 22 18:08:34 7o kernel: ad6: TIMEOUT - READ_DMA retrying (1 retry left) LBA=259316831 Apr 22 18:08:38 7o kernel: ad4: WARNING - SETFEATURES SET TRANSFER MODE taskqueue timeout - completing request directly Apr 22 18:08:42 7o kernel: ad4: WARNING - SETFEATURES SET TRANSFER MODE taskqueue timeout - completing request directly до этого такого не было (( почитал про пункт номер 2,проблем с винтами ранее не было (( 7o# df -h Filesystem Size Used Avail Capacity Mounted on /dev/ad0s1a 496M 335M 121M 74% / devfs 1.0K 1.0K 0B 100% /dev /dev/ad0s1e 496M 28M 428M 6% /tmp /dev/ad0s1f 68G 6.3G 56G 10% /usr /dev/ad0s1d 1.7G 955M 628M 60% /var /dev/ad12s1f 672G 578G 40G 94% /shares/hd1 /dev/ad14s1f 672G 554G 64G 90% /shares/hd2 /dev/ar0s1d 451G 333G 82G 80% /shares/hd3 /dev/ar1s1f 897G 752G 74G 91% /shares/hd4 7o# atacontrol list ATA channel 0: Master: ad0 <MAXTOR STM3802110A/3.AAK> ATA/ATAPI revision 7 Slave: no device present ATA channel 1: Master: no device present Slave: no device present ATA channel 2: Master: ad4 <ST3250820AS/3.AAC> SATA revision 1.x Slave: no device present ATA channel 3: Master: ad6 <ST3250820AS/3.AAC> SATA revision 1.x Slave: no device present ATA channel 4: Master: ad8 <ST3500630AS/3.AAC> SATA revision 2.x Slave: no device present ATA channel 5: Master: ad10 <ST3500630AS/3.AAC> SATA revision 2.x Slave: no device present ATA channel 6: Master: ad12 <ST3750640AS/3.AAE> SATA revision 1.x Slave: no device present ATA channel 7: Master: ad14 <ST3750640AS/3.AAE> SATA revision 1.x Slave: no device present 7o# atacontrol cap ad10 Protocol SATA revision 2.x device model ST3500630AS serial number 5QG18LV4 firmware revision 3.AAC cylinders 16383 heads 16 sectors/track 63 lba supported 268435455 sectors lba48 supported 976773168 sectors dma supported overlap not supported Feature Support Enable Value Vendor write cache yes yes read ahead yes yes Native Command Queuing (NCQ) yes - 31/0x1F Tagged Command Queuing (TCQ) no no 31/0x1F SMART yes yes microcode download yes yes security yes no power management yes yes advanced power management no no 65278/0xFEFE automatic acoustic management no no 0/0x00 254/0xFE 7o# atacontrol cap ad4 Protocol SATA revision 1.x device model ST3250820AS serial number 5QEZ067B firmware revision 3.AAC cylinders 16383 heads 16 sectors/track 63 lba supported 268435455 sectors lba48 supported 488397168 sectors dma supported overlap not supported Feature Support Enable Value Vendor write cache yes yes read ahead yes yes Native Command Queuing (NCQ) yes - 31/0x1F Tagged Command Queuing (TCQ) no no 31/0x1F SMART yes yes microcode download yes yes security yes no power management yes yes advanced power management no no 65278/0xFEFE automatic acoustic management no no 0/0x00 254/0xFE что можете посоветовать ?

Ваше сообщение

Имя*:

EMail:

Для отправки новых сообщений в текущей нити на email укажите знак ! перед адресом, например, !user@host.ru (!! - не показывать email).
Более тонкая настройка отправки ответов производится в профиле зарегистрированного участника форума.

Заголовок*:

Сообщение*:

> Добрый день, 
> 7o# uname -v 
> FreeBSD 7.2-PRERELEASE #0: Sat Apr 18 12:11:30 MSD 2009

> недавно обновил...
> начались проблемы :

> 1 в логах начала появляться запись 
> Apr 22 18:20:02 7o kernel: kern.maxfiles limit exceeded by uid 80, please 
> see tuning(7).
> Apr 22 18:20:04 7o kernel: kern.maxfiles limit exceeded by uid 0, please 
> see tuning(7).
> Apr 22 18:20:05 7o kernel: kern.maxfiles limit exceeded by uid 0, please 
> see tuning(7).
> Apr 22 18:20:06 7o kernel: kern.maxfiles limit exceeded by uid 53, please 
> see tuning(7).

> 2 Apr 22 18:08:02 7o kernel: ad10: WARNING - SETFEATURES SET TRANSFER 
> MODE taskqueue timeout - completing request directly 
> Apr 22 18:08:06 7o kernel: ad10: WARNING - SETFEATURES ENABLE RCACHE taskqueue 
> timeout - completing request directly 
> Apr 22 18:08:10 7o kernel: ad10: WARNING - SETFEATURES ENABLE WCACHE taskqueue 
> timeout - completing request directly 
> Apr 22 18:08:14 7o kernel: ad10: WARNING - SET_MULTI taskqueue timeout - 
> completing request directly 
> Apr 22 18:08:14 7o kernel: ad10: TIMEOUT - READ_DMA48 retrying (1 retry 
> left) LBA=961890607 
> Apr 22 18:08:18 7o kernel: ad6: WARNING - SETFEATURES SET TRANSFER MODE 
> taskqueue timeout - completing request directly 
> Apr 22 18:08:22 7o kernel: ad6: WARNING - SETFEATURES SET TRANSFER MODE 
> taskqueue timeout - completing request directly 
> Apr 22 18:08:26 7o kernel: ad6: WARNING - SETFEATURES ENABLE RCACHE taskqueue 
> timeout - completing request directly 
> Apr 22 18:08:30 7o kernel: ad6: WARNING - SETFEATURES ENABLE WCACHE taskqueue 
> timeout - completing request directly 
> Apr 22 18:08:34 7o kernel: ad6: WARNING - SET_MULTI taskqueue timeout - 
> completing request directly 
> Apr 22 18:08:34 7o kernel: ad6: TIMEOUT - READ_DMA retrying (1 retry 
> left) LBA=259316831 
> Apr 22 18:08:38 7o kernel: ad4: WARNING - SETFEATURES SET TRANSFER MODE 
> taskqueue timeout - completing request directly 
> Apr 22 18:08:42 7o kernel: ad4: WARNING - SETFEATURES SET TRANSFER MODE 
> taskqueue timeout - completing request directly

> до этого такого не было ((

> почитал про пункт номер 2,проблем с винтами ранее не было (( 
> 7o# df -h 
> Filesystem            
>            
>     Size    Used   
> Avail Capacity  Mounted on 
> /dev/ad0s1a            
>            
>    496M    335M    
> 121M    74%    / 
> devfs            
>            
>          1.0K  
>   1.0K      0B   
> 100%    /dev 
> /dev/ad0s1e            
>            
>    496M     28M   
>  428M     6%    /tmp 
 
> /dev/ad0s1f            
>            
>     68G    6.3G   
>   56G    10%    /usr 
 
> /dev/ad0s1d            
>            
>    1.7G    955M    
> 628M    60%    /var 
> /dev/ad12s1f            
>            
>   672G    578G     
> 40G    94%    /shares/hd1 
> /dev/ad14s1f            
>            
>   672G    554G     
> 64G    90%    /shares/hd2 
> /dev/ar0s1d            
>            
>    451G    333G    
>  82G    80%    /shares/hd3 
> /dev/ar1s1f            
>            
>    897G    752G    
>  74G    91%    /shares/hd4

> 7o# atacontrol list 
> ATA channel 0: 
>     Master:  ad0 <MAXTOR STM3802110A/3.AAK> ATA/ATAPI revision 7 
 
>     Slave:       no 
> device present 
> ATA channel 1: 
>     Master:      no device 
> present 
>     Slave:       no 
> device present 
> ATA channel 2: 
>     Master:  ad4 <ST3250820AS/3.AAC> SATA revision 1.x 
>     Slave:       no 
> device present 
> ATA channel 3: 
>     Master:  ad6 <ST3250820AS/3.AAC> SATA revision 1.x 
>     Slave:       no 
> device present 
> ATA channel 4: 
>     Master:  ad8 <ST3500630AS/3.AAC> SATA revision 2.x 
>     Slave:       no 
> device present 
> ATA channel 5: 
>     Master: ad10 <ST3500630AS/3.AAC> SATA revision 2.x 
>     Slave:       no 
> device present 
> ATA channel 6: 
>     Master: ad12 <ST3750640AS/3.AAE> SATA revision 1.x 
>     Slave:       no 
> device present 
> ATA channel 7: 
>     Master: ad14 <ST3750640AS/3.AAE> SATA revision 1.x 
>     Slave:       no 
> device present

> 7o# atacontrol cap ad10

> Protocol            
>   SATA revision 2.x 
> device model          ST3500630AS 
 
> serial number         5QG18LV4 
> firmware revision     3.AAC 
> cylinders            
>  16383 
> heads            
>      16 
> sectors/track         63 
> lba supported         268435455 sectors 
 
> lba48 supported       976773168 sectors 
> dma supported 
> overlap not supported

> Feature            
>           Support 
>  Enable    Value      
>      Vendor 
> write cache           
>          yes  
>     yes 
> read ahead           
>           yes 
>      yes 
> Native Command Queuing (NCQ)   yes      
>  -      31/0x1F 
> Tagged Command Queuing (TCQ)   no      
>  no      31/0x1F 
> SMART            
>            
>    yes      yes 
> microcode download           
>   yes      yes 
> security            
>            
> yes      no 
> power management           
>     yes      yes 
 
> advanced power management      no    
>    no      65278/0xFEFE 
> automatic acoustic management  no       no 
>      0/0x00  254/0xFE

> 7o# atacontrol cap ad4

> Protocol            
>   SATA revision 1.x 
> device model          ST3250820AS 
 
> serial number         5QEZ067B 
> firmware revision     3.AAC 
> cylinders            
>  16383 
> heads            
>      16 
> sectors/track         63 
> lba supported         268435455 sectors 
 
> lba48 supported       488397168 sectors 
> dma supported 
> overlap not supported

>  что можете посоветовать ?

При общении не допускается: неуважительное отношение к собеседнику, хамство, унизительное обращение, ненормативная лексика, переход на личности, агрессивное поведение, обесценивание собеседника, провоцирование флейма голословными и заведомо ложными заявлениями. Не отвечайте на сообщения, явно нарушающие правила - удаляются не только сами нарушения, но и все ответы на них. Лог модерирования.

Партнёры:

Хостинг:

Закладки на сайте
Проследить за страницей

Created 1996-2024 by Maxim Chirkov
Добавить, Поддержать, Вебмастеру