The OpenNET Project / Index page

[ новости /+++ | форум | wiki | теги | ]

форумы  помощь  поиск  регистрация  майллист  вход/выход  слежка  RSS
"Не получается настроить FreeRADIUS"
Вариант для распечатки  
Пред. тема | След. тема 
Форум Маршрутизаторы CISCO и др. оборудование. (Диагностика и решение проблем)
Изначальное сообщение [ Отслеживать ]

"Не получается настроить FreeRADIUS"  +/
Сообщение от freeradius_noob (ok) on 08-Мрт-16, 22:38 
Добрый день!
Помогите, пожалуйста, разобрать в проблеме!

Схема: К коммутатору cisco подсоединен радиус сервер(debian+freeradius) и Windows XP SP3
Находятся в vlan 2, IP сервера 192.168.3.4, IP клиента 192.168.3.2.

Надо, что бы машина под управлением Windows XP SP3 авторизовывалась с помощью радиус сервера.

Коммутатор настраивал по следующей статье http://www.nestor.minsk.by/sr/2006/02/sr60209.html. Приложил ссылку, чтобы не дублировать текст, да и для восприятия лучше.

Настройка радиус сервера:
client.config
-------------------------------------------------------
client test-radius  {
    ipaddr         = 192.168.3.1
    secret        = 12345
    require_message_authenticator = no
    nastype     = other    
}
-------------------------------------------------------

proxy.config( Изменил блок realm DEFAULT)
-------------------------------------------------------
proxy server {
    default_fallback = no
}
home_server localhost {
    type = auth
    ipaddr = 127.0.0.1
    port = 1812
    secret = testing123
    require_message_authenticator = yes
    response_window = 20
    zombie_period = 40
    revive_interval = 120
    status_check = status-server
    check_interval = 30
    num_answers_to_alive = 3
    max_outstanding = 65536
    coa {
        irt = 2
        mrt = 16
        mrc = 5
        mrd = 30
    }
}
home_server_pool my_auth_failover {
    type = fail-over
    home_server = localhost
}

realm example.com {
    auth_pool = my_auth_failover
}
realm LOCAL {

}
realm DEFAULT {
    type         = radius
    authhost    = LOCAL
    accthost    = LOCAL
    secret        = 12345
}

-------------------------------------------------------

users( Добавил user1, остальное не трогал)
-------------------------------------------------------
user1    Cleartext-Password := "12345"
    Service-Type = Framed-User,
    Framed-IP-Address = 192.168.3.2,
    Framed-IP-Netmask = 255.255.255.0

DEFAULT    Framed-Protocol == PPP
    Framed-Protocol = PPP,
    Framed-Compression = Van-Jacobson-TCP-IP

DEFAULT    Hint == "CSLIP"
    Framed-Protocol = SLIP,
    Framed-Compression = Van-Jacobson-TCP-IP


DEFAULT    Hint == "SLIP"
    Framed-Protocol = SLIP
-------------------------------------------------------

После запуска radius server в режиме debug (freeradius -fX), переключаюсь на машину с виндой. Сетевое подключение запрашивает логин и пароль. После ввода и отправки запросов на radius server, сетевое подключение заново запрашивает логин и пароль.

Вот что выводит радиус сервер в это время:
freeradius -fX:
-------------------------------------------------------
FreeRADIUS Version 2.1.12, for host i486-pc-linux-gnu, built on Dec 16 2012 at 22:03:33
Copyright (C) 1999-2009 The FreeRADIUS server project and contributors.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License v2.
Starting - reading configuration files ...
including configuration file /etc/freeradius/radiusd.conf
including configuration file /etc/freeradius/proxy.conf
including configuration file /etc/freeradius/clients.conf
including files in directory /etc/freeradius/modules/
including configuration file /etc/freeradius/modules/mschap
including configuration file /etc/freeradius/modules/detail
including configuration file /etc/freeradius/modules/files
including configuration file /etc/freeradius/modules/redis
including configuration file /etc/freeradius/modules/krb5
including configuration file /etc/freeradius/modules/chap
including configuration file /etc/freeradius/modules/expiration
including configuration file /etc/freeradius/modules/ldap
including configuration file /etc/freeradius/modules/radutmp
including configuration file /etc/freeradius/modules/attr_filter
including configuration file /etc/freeradius/modules/wimax
including configuration file /etc/freeradius/modules/pap
including configuration file /etc/freeradius/modules/sql_log
including configuration file /etc/freeradius/modules/cui
including configuration file /etc/freeradius/modules/ntlm_auth
including configuration file /etc/freeradius/modules/always
including configuration file /etc/freeradius/modules/sradutmp
including configuration file /etc/freeradius/modules/echo
including configuration file /etc/freeradius/modules/opendirectory
including configuration file /etc/freeradius/modules/acct_unique
including configuration file /etc/freeradius/modules/rediswho
including configuration file /etc/freeradius/modules/ippool
including configuration file /etc/freeradius/modules/counter
including configuration file /etc/freeradius/modules/policy
including configuration file /etc/freeradius/modules/mac2vlan
including configuration file /etc/freeradius/modules/otp
including configuration file /etc/freeradius/modules/passwd
including configuration file /etc/freeradius/modules/linelog
including configuration file /etc/freeradius/modules/expr
including configuration file /etc/freeradius/modules/unix
including configuration file /etc/freeradius/modules/mac2ip
including configuration file /etc/freeradius/modules/etc_group
including configuration file /etc/freeradius/modules/soh
including configuration file /etc/freeradius/modules/sqlcounter_expire_on_login
including configuration file /etc/freeradius/modules/exec
including configuration file /etc/freeradius/modules/inner-eap
including configuration file /etc/freeradius/modules/detail.log
including configuration file /etc/freeradius/modules/dynamic_clients
including configuration file /etc/freeradius/modules/detail.example.com
including configuration file /etc/freeradius/modules/smbpasswd
including configuration file /etc/freeradius/modules/realm
including configuration file /etc/freeradius/modules/perl
including configuration file /etc/freeradius/modules/attr_rewrite
including configuration file /etc/freeradius/modules/logintime
including configuration file /etc/freeradius/modules/pam
including configuration file /etc/freeradius/modules/smsotp
including configuration file /etc/freeradius/modules/checkval
including configuration file /etc/freeradius/modules/replicate
including configuration file /etc/freeradius/modules/preprocess
including configuration file /etc/freeradius/modules/digest
including configuration file /etc/freeradius/eap.conf
including configuration file /etc/freeradius/policy.conf
including files in directory /etc/freeradius/sites-enabled/
including configuration file /etc/freeradius/sites-enabled/default
including configuration file /etc/freeradius/sites-enabled/inner-tunnel
main {
    user = "freerad"
    group = "freerad"
    allow_core_dumps = no
}
including dictionary file /etc/freeradius/dictionary
main {
    name = "freeradius"
    prefix = "/usr"
    localstatedir = "/var"
    sbindir = "/usr/sbin"
    logdir = "/var/log/freeradius"
    run_dir = "/var/run/freeradius"
    libdir = "/usr/lib/freeradius"
    radacctdir = "/var/log/freeradius/radacct"
    hostname_lookups = no
    max_request_time = 30
    cleanup_delay = 5
    max_requests = 1024
    pidfile = "/var/run/freeradius/freeradius.pid"
    checkrad = "/usr/sbin/checkrad"
    debug_level = 0
    proxy_requests = yes
log {
    stripped_names = no
    auth = no
    auth_badpass = no
    auth_goodpass = no
}
security {
    max_attributes = 200
    reject_delay = 1
    status_server = yes
}
}
radiusd: #### Loading Realms and Home Servers ####
proxy server {
    retry_delay = 5
    retry_count = 3
    default_fallback = no
    dead_time = 120
    wake_all_if_all_dead = no
}
home_server localhost {
    ipaddr = 127.0.0.1
    port = 1812
    type = "auth"
    secret = "testing123"
    response_window = 20
    max_outstanding = 65536
    require_message_authenticator = yes
    zombie_period = 40
    status_check = "status-server"
    ping_interval = 30
    check_interval = 30
    num_answers_to_alive = 3
    num_pings_to_alive = 3
    revive_interval = 120
    status_check_timeout = 4
  coa {
    irt = 2
    mrt = 16
    mrc = 5
    mrd = 30
  }
}
home_server_pool my_auth_failover {
    type = fail-over
    home_server = localhost
}
realm example.com {
    auth_pool = my_auth_failover
}
realm LOCAL {
}
realm DEFAULT {
    authhost = LOCAL
    accthost = LOCAL
}
radiusd: #### Loading Clients ####
client test-radius {
    ipaddr = 192.168.3.1
    require_message_authenticator = no
    secret = "12345"
    nastype = "other"
}
radiusd: #### Instantiating modules ####
instantiate {
Module: Linked to module rlm_exec
Module: Instantiating module "exec" from file /etc/freeradius/modules/exec
  exec {
    wait = no
    input_pairs = "request"
    shell_escape = yes
  }
Module: Linked to module rlm_expr
Module: Instantiating module "expr" from file /etc/freeradius/modules/expr
Module: Linked to module rlm_expiration
Module: Instantiating module "expiration" from file /etc/freeradius/modules/expiration
  expiration {
    reply-message = "Password Has Expired  "
  }
Module: Linked to module rlm_logintime
Module: Instantiating module "logintime" from file /etc/freeradius/modules/logintime
  logintime {
    reply-message = "You are calling outside your allowed timespan  "
    minimum-timeout = 60
  }
}
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/freeradius/radiusd.conf
modules {
  Module: Creating Auth-Type = digest
  Module: Creating Post-Auth-Type = REJECT
Module: Checking authenticate {...} for more modules to load
Module: Linked to module rlm_pap
Module: Instantiating module "pap" from file /etc/freeradius/modules/pap
  pap {
    encryption_scheme = "auto"
    auto_header = no
  }
Module: Linked to module rlm_chap
Module: Instantiating module "chap" from file /etc/freeradius/modules/chap
Module: Linked to module rlm_mschap
Module: Instantiating module "mschap" from file /etc/freeradius/modules/mschap
  mschap {
    use_mppe = yes
    require_encryption = no
    require_strong = no
    with_ntdomain_hack = no
    allow_retry = yes
  }
Module: Linked to module rlm_digest
Module: Instantiating module "digest" from file /etc/freeradius/modules/digest
Module: Linked to module rlm_unix
Module: Instantiating module "unix" from file /etc/freeradius/modules/unix
  unix {
    radwtmp = "/var/log/freeradius/radwtmp"
  }
Module: Linked to module rlm_eap
Module: Instantiating module "eap" from file /etc/freeradius/eap.conf
  eap {
    default_eap_type = "md5"
    timer_expire = 60
    ignore_unknown_eap_types = no
    cisco_accounting_username_bug = no
    max_sessions = 4096
  }
Module: Linked to sub-module rlm_eap_md5
Module: Instantiating eap-md5
Module: Linked to sub-module rlm_eap_leap
Module: Instantiating eap-leap
Module: Linked to sub-module rlm_eap_gtc
Module: Instantiating eap-gtc
   gtc {
    challenge = "Password: "
    auth_type = "PAP"
   }
Module: Linked to sub-module rlm_eap_tls
Module: Instantiating eap-tls
   tls {
    rsa_key_exchange = no
    dh_key_exchange = yes
    rsa_key_length = 512
    dh_key_length = 512
    verify_depth = 0
    CA_path = "/etc/freeradius/certs"
    pem_file_type = yes
    private_key_file = "/etc/freeradius/certs/server.key"
    certificate_file = "/etc/freeradius/certs/server.pem"
    CA_file = "/etc/freeradius/certs/ca.pem"
    private_key_password = "whatever"
    dh_file = "/etc/freeradius/certs/dh"
    random_file = "/dev/urandom"
    fragment_size = 1024
    include_length = yes
    check_crl = no
    cipher_list = "DEFAULT"
    make_cert_command = "/etc/freeradius/certs/bootstrap"
    ecdh_curve = "prime256v1"
    cache {
    enable = no
    lifetime = 24
    max_entries = 255
    }
    verify {
    }
    ocsp {
    enable = no
    override_cert_url = yes
    url = "http://127.0.0.1/ocsp/"
    }
   }
Module: Linked to sub-module rlm_eap_ttls
Module: Instantiating eap-ttls
   ttls {
    default_eap_type = "md5"
    copy_request_to_tunnel = no
    use_tunneled_reply = no
    virtual_server = "inner-tunnel"
    include_length = yes
   }
Module: Linked to sub-module rlm_eap_peap
Module: Instantiating eap-peap
   peap {
    default_eap_type = "mschapv2"
    copy_request_to_tunnel = no
    use_tunneled_reply = no
    proxy_tunneled_request_as_eap = yes
    virtual_server = "inner-tunnel"
    soh = no
   }
Module: Linked to sub-module rlm_eap_mschapv2
Module: Instantiating eap-mschapv2
   mschapv2 {
    with_ntdomain_hack = no
    send_error = no
   }
Module: Linked to module rlm_attr_filter
Module: Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/modules/attr_filter
  attr_filter attr_filter.access_challenge {
    attrsfile = "/etc/freeradius/attrs.access_challenge"
    key = "%{User-Name}"
    relaxed = no
  }
Module: Linked to module rlm_always
Module: Instantiating module "handled" from file /etc/freeradius/modules/always
  always handled {
    rcode = "handled"
    simulcount = 0
    mpp = no
  }
Module: Checking authorize {...} for more modules to load
Module: Linked to module rlm_preprocess
Module: Instantiating module "preprocess" from file /etc/freeradius/modules/preprocess
  preprocess {
    huntgroups = "/etc/freeradius/huntgroups"
    hints = "/etc/freeradius/hints"
    with_ascend_hack = no
    ascend_channels_per_line = 23
    with_ntdomain_hack = no
    with_specialix_jetstream_hack = no
    with_cisco_vsa_hack = no
    with_alvarion_vsa_hack = no
  }
Module: Linked to module rlm_realm
Module: Instantiating module "suffix" from file /etc/freeradius/modules/realm
  realm suffix {
    format = "suffix"
    delimiter = "@"
    ignore_default = no
    ignore_null = no
  }
Module: Linked to module rlm_files
Module: Instantiating module "files" from file /etc/freeradius/modules/files
  files {
    usersfile = "/etc/freeradius/users"
    acctusersfile = "/etc/freeradius/acct_users"
    preproxy_usersfile = "/etc/freeradius/preproxy_users"
    compat = "no"
  }
Module: Checking preacct {...} for more modules to load
Module: Linked to module rlm_acct_unique
Module: Instantiating module "acct_unique" from file /etc/freeradius/modules/acct_unique
  acct_unique {
    key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port"
  }
Module: Checking accounting {...} for more modules to load
Module: Linked to module rlm_detail
Module: Instantiating module "detail" from file /etc/freeradius/modules/detail
  detail {
    detailfile = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
    header = "%t"
    detailperm = 384
    dirperm = 493
    locking = no
    log_packet_header = no
  }
Module: Linked to module rlm_radutmp
Module: Instantiating module "radutmp" from file /etc/freeradius/modules/radutmp
  radutmp {
    filename = "/var/log/freeradius/radutmp"
    username = "%{User-Name}"
    case_sensitive = yes
    check_with_nas = yes
    perm = 384
    callerid = yes
  }
Module: Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/modules/attr_filter
  attr_filter attr_filter.accounting_response {
    attrsfile = "/etc/freeradius/attrs.accounting_response"
    key = "%{User-Name}"
    relaxed = no
  }
Module: Checking session {...} for more modules to load
Module: Checking post-proxy {...} for more modules to load
Module: Checking post-auth {...} for more modules to load
Module: Instantiating module "attr_filter.access_reject" from file /etc/freeradius/modules/attr_filter
  attr_filter attr_filter.access_reject {
    attrsfile = "/etc/freeradius/attrs.access_reject"
    key = "%{User-Name}"
    relaxed = no
  }
} # modules
} # server
server inner-tunnel { # from file /etc/freeradius/sites-enabled/inner-tunnel
modules {
Module: Checking authenticate {...} for more modules to load
Module: Checking authorize {...} for more modules to load
Module: Checking session {...} for more modules to load
Module: Checking post-proxy {...} for more modules to load
Module: Checking post-auth {...} for more modules to load
} # modules
} # server
radiusd: #### Opening IP addresses and Ports ####
listen {
    type = "auth"
    ipaddr = *
    port = 0
}
listen {
    type = "acct"
    ipaddr = *
    port = 0
}
listen {
    type = "auth"
    ipaddr = 127.0.0.1
    port = 18120
}
... adding new socket proxy address * port 44510
Listening on authentication address * port 1812
Listening on accounting address * port 1813
Listening on authentication address 127.0.0.1 port 18120 as server inner-tunnel
Listening on proxy address * port 1814
Ready to process requests.
rad_recv: Access-Request packet from host 192.168.3.1 port 1645, id=55, length=106
    NAS-IP-Address = 192.168.3.1
    NAS-Port = 4
    NAS-Port-Type = Virtual
    User-Name = "user1"
    Calling-Station-Id = "00-0C-29-60-02-C5"
    Service-Type = Framed-User
    Framed-MTU = 1500
    EAP-Message = 0x0296000a017573657231
    Message-Authenticator = 0xa33422adbd18ffa8795e7c54dfa574d0
# Executing section authorize from file /etc/freeradius/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
++[digest] returns noop
[suffix] No '@' in User-Name = "user1", looking up realm NULL
[suffix] Found realm "DEFAULT"
[suffix] Adding Stripped-User-Name = "user1"
[suffix] Adding Realm = "DEFAULT"
[suffix] Authentication realm is LOCAL.
++[suffix] returns ok
[eap] EAP packet type response id 150 length 10
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
[files] users: Matched entry user1 at line 77
++[files] returns ok
++[expiration] returns noop
++[logintime] returns noop
[pap] WARNING: Auth-Type already set.  Not setting to PAP
++[pap] returns noop
Found Auth-Type = EAP
# Executing group from file /etc/freeradius/sites-enabled/default
+- entering group authenticate {...}
[eap] EAP Identity
[eap] processing type md5
rlm_eap_md5: Issuing Challenge
++[eap] returns handled
Sending Access-Challenge of id 55 to 192.168.3.1 port 1645
    Service-Type = Framed-User
    Framed-IP-Address = 192.168.3.2
    Framed-IP-Netmask = 255.255.255.0
    EAP-Message = 0x0197001604101d7a8a35ed065dd5893e078eaa996c1b
    Message-Authenticator = 0x00000000000000000000000000000000
    State = 0xcac416b3ca531286884f55bd9a46bea0
Finished request 0.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 192.168.3.1 port 1645, id=55, length=106
Sending duplicate reply to client test-radius port 1645 - ID: 55
Sending Access-Challenge of id 55 to 192.168.3.1 port 1645
Waking up in 0.6 seconds.
Cleaning up request 0 ID 55 with timestamp +28
Ready to process requests.
rad_recv: Access-Request packet from host 192.168.3.1 port 1645, id=55, length=106
    NAS-IP-Address = 192.168.3.1
    NAS-Port = 4
    NAS-Port-Type = Virtual
    User-Name = "user1"
    Calling-Station-Id = "00-0C-29-60-02-C5"
    Service-Type = Framed-User
    Framed-MTU = 1500
    EAP-Message = 0x0296000a017573657231
    Message-Authenticator = 0xa33422adbd18ffa8795e7c54dfa574d0
# Executing section authorize from file /etc/freeradius/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
++[digest] returns noop
[suffix] No '@' in User-Name = "user1", looking up realm NULL
[suffix] Found realm "DEFAULT"
[suffix] Adding Stripped-User-Name = "user1"
[suffix] Adding Realm = "DEFAULT"
[suffix] Authentication realm is LOCAL.
++[suffix] returns ok
[eap] EAP packet type response id 150 length 10
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
[files] users: Matched entry user1 at line 77
++[files] returns ok
++[expiration] returns noop
++[logintime] returns noop
[pap] WARNING: Auth-Type already set.  Not setting to PAP
++[pap] returns noop
Found Auth-Type = EAP
# Executing group from file /etc/freeradius/sites-enabled/default
+- entering group authenticate {...}
[eap] EAP Identity
[eap] processing type md5
rlm_eap_md5: Issuing Challenge
++[eap] returns handled
Sending Access-Challenge of id 55 to 192.168.3.1 port 1645
    Service-Type = Framed-User
    Framed-IP-Address = 192.168.3.2
    Framed-IP-Netmask = 255.255.255.0
    EAP-Message = 0x019700160410672a3f20abe623dcffffb6d47769a724
    Message-Authenticator = 0x00000000000000000000000000000000
    State = 0x13b3222013242636afa16a15cb9881e5
Finished request 1.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 192.168.3.1 port 1645, id=55, length=106
Sending duplicate reply to client test-radius port 1645 - ID: 55
Sending Access-Challenge of id 55 to 192.168.3.1 port 1645
Waking up in 0.6 seconds.
Cleaning up request 1 ID 55 with timestamp +38
Ready to process requests.
----------------------------------------------------------


Вообще меня смущает, что в запросе "Access-Request packet from host 192.168.3.1 port 1645" используется старый порт 1645, а не 1812. Несколько раз перепроверял настройки на маршрутизаторе.
show run:
radius-server host 192.168.3.4 auth-port 1812 acct-port 1813
radius-server key 12345

Помогите, пожалуйста, не знаю куда плясать.

Ответить | Правка | Cообщить модератору

Оглавление

Сообщения по теме [Сортировка по времени | RSS]


1. "Не получается настроить FreeRADIUS"  +/
Сообщение от Hammer (ok) on 09-Мрт-16, 13:21 
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
++[digest] returns noop
[suffix] No '@' in User-Name = "user1", looking up realm NULL
Ответить | Правка | ^ к родителю #0 | Наверх | Cообщить модератору

Архив | Удалить

Рекомендовать для помещения в FAQ | Индекс форумов | Темы | Пред. тема | След. тема




Партнёры:
PostgresPro
Inferno Solutions
Hosting by Hoster.ru
Хостинг:

Закладки на сайте
Проследить за страницей
Created 1996-2024 by Maxim Chirkov
Добавить, Поддержать, Вебмастеру