23:48 $ uname -r
5.3.0-23-generic

23:48 $ cat /etc/modprobe.d/it87.conf
options it87 force_id=0x8622

23:48 $ sensors
k10temp-pci-00c3
Adapter: PCI adapter
Tdie:         +49.1°C  (high = +70.0°C)
Tctl:         +49.1°C  

acpitz-acpi-0
Adapter: ACPI interface
temp1:        +16.8°C  (crit = +20.8°C)
temp2:        +16.8°C  (crit = +20.8°C)

amdgpu-pci-0900
Adapter: PCI adapter
vddgfx:       +0.75 V  
fan1:         697 RPM  (min =    0 RPM, max = 3200 RPM)
edge:         +37.0°C  (crit = +94.0°C, hyst = -273.1°C)
power1:        7.16 W  (cap = 145.00 W)

it8622-isa-0a40
Adapter: ISA adapter
in0:          +0.25 V  (min =  +0.00 V, max =  +3.06 V)
in1:          +2.02 V  (min =  +0.00 V, max =  +3.06 V)
in2:          +2.05 V  (min =  +0.00 V, max =  +3.06 V)
in3:          +2.03 V  (min =  +0.00 V, max =  +3.06 V)
in4:          +1.07 V  (min =  +0.00 V, max =  +3.06 V)
in5:          +0.90 V  (min =  +0.00 V, max =  +3.06 V)
in6:          +1.37 V  (min =  +0.00 V, max =  +3.06 V)
3VSB:         +3.29 V  (min =  +0.00 V, max =  +6.12 V)
Vbat:         +3.24 V  
fan1:         352 RPM  (min =    0 RPM)
fan2:         610 RPM  (min =    0 RPM)
fan3:         634 RPM  (min =    0 RPM)
fan4:        1795 RPM  (min =    0 RPM)
fan5:         453 RPM  (min =    0 RPM)
temp1:        +34.0°C  (low  = +127.0°C, high = +127.0°C)  sensor = thermistor
temp2:        +41.0°C  (low  = +127.0°C, high = +127.0°C)  sensor = thermistor
temp3:        +40.0°C  (low  = +127.0°C, high = +127.0°C)  sensor = disabled
intrusion0:  OK