всем добрый день! подскажите, пожалста, как сбросить пароль на 3510?
пробовал так:
bash-2.05# ./sccli 192.168.1.51                                          
sccli: selected se3000://192.168.1.51:58632 [SUN StorEdge 3510 SN#07EAB8]
sccli> set password ""  
Password:                
sccli: password incorrect
sccli>                  
т.е. запрашивает пароль :(

• Sun Storedge 3510 FC - Забыл пароль,il428, 10:14 , 25-Сен-10
  • Sun Storedge 3510 FC - Забыл пароль,Виктор, 12:41 , 02-Ноя-18

победил вот таким способом (сброс массива по дефолту)

Take out and open up the controller (6 screws on the bottom, two on
the front panel
). Short the jumper on the bottom side of the
large daughterboard, near the large connector (It's JP9, the only
single two-pin jumper on the daugterboard).

Leave the controller open, but insert it into the array. Turn on
the array and leave it on for a few minutes.

Take out the controller again, remove the jumper, and screw it back
together. You'll have a fresly reset (Nvram factory reset) controller.
Remember: It will be back to 38k4 N81 on the console if you changed
the baud rate before.

для Sun Storedge 3310 сбрасывал пароль отключив обе батарейки, большую литиевую и маленькую, Dallas (она под крышечкой)