Помогите, пожалуйста !!!
Сижу под OpenBSD 3.2, в rc.conf прописываю: named_flags="", в комментарии написано так... перзапускаю машину, бзда пишет следующее:
starting named
named [ ] directory /var/named/ no such file or directory
savecore: no core dump
и т.д.
вхожу под рутом, пишу top ессно named нет,
но с консоли запускается, и работает нормально...
в rc.conf пробовал менять строку named_chroot=/var/named
система выдает какие то ошибки, но потом при входе в систему named
работает...
что делать ? подскажите, плз...
ты дай свой rc.conf лучше, заодно интересно посмотреть как он отличается от FreeBDS rc.conf
>ты дай свой rc.conf лучше, заодно интересно посмотреть как он отличается от
>FreeBDS rc.confДЕРЖИ...
#!/bin/sh -
#
# $OpenBSD: rc.conf,v 1.79 2002/09/06 21:30:22 deraadt Exp $# set these to "NO" to turn them off. otherwise, they're used as flags
routed_flags=NO # for normal use: "-q"
altqd_flags=NO # for normal use: ""
mrouted_flags=NO # for normal use: "", if activated
# be sure to enable multicast_router below.
rarpd_flags=NO # for normal use: "-a"
bootparamd_flags=NO # for normal use: ""
rbootd_flags=NO # for normal use: ""
sshd_flags="" # for normal use: ""
smtpfwdd_flags=NO # for normal use: ""; be sure to configure smtpd(8)
# and sendmail(8) to use MSA only
named_flags="" # for normal use: ""
rdate_flags=NO # for normal use: [RFC868-host] or [-n RFC1361-host]
timed_flags=NO # for normal use: ""
ntpdate_flags=NO # for normal use: NTP server; run before ntpd starts
isakmpd_flags=NO # for normal use: ""
mopd_flags=NO # for normal use: "-a"
apmd_flags=NO # for normal use: ""
dhcpd_flags=NO # for normal use: "-q"
rtadvd_flags=NO # for normal use: list of interfaces
# be sure to set net.inet6.ip6.forwarding=1
route6d_flags=NO # for normal use: ""
# be sure to set net.inet6.ip6.forwarding=1
rtsold_flags=NO # for normal use: interface
# be sure to set net.inet6.ip6.forwarding=0
# be sure to set net.inet6.ip6.accept_rtadv=1
lpd_flags=NO # for normal use: "" (or "-l" for debugging)# use -u to disable chroot, see httpd(8)
httpd_flags=NO # for normal use: "" (or "-DSSL" after reading ssl(8))# For normal use: "-L sm-mta -bd -q30m", and note there is a cron job
sendmail_flags="-L sm-mta -C/etc/mail/localhost.cf -bd -q30m"# Set to NO if ftpd is running out of inetd
ftpd_flags=NO # for non-inetd use: "-D"# Set to NO if identd is running out of inetd
identd_flags=NO # for non-inetd use: "-b -u nobody -elo"# On some architectures, you must also disable console getty in /etc/ttys
xdm_flags=NO # for normal use: ""# For enabling console mouse support (i386 architecture only)
wsmoused_flags=NO # for ps/2 or usb mice: "", serial: "-p /dev/cua00"# set the following to "YES" to turn them on
rwhod=NO
nfs_server=NO # see sysctl.conf for nfs client configuration
lockd=NO
gated=NO
amd=NO
pf=NO # Packet filter / NAT
portmap=NO # Note: inetd(8) rpc services need portmap too
inetd=YES # almost always needed
check_quotas=YES # NO may be desirable in some YP environments
ntpd=YES # run ntpd if it existskrb5_master_kdc=NO # KerberosV master KDC. Run 'info heimdal' for help.
krb5_slave_kdc=NO # KerberosV slave KDC.
afs=NO # mount and run afs# Multicast routing configuration
# Please look at /etc/netstart for a detailed description if you change these
multicast_host=NO # Route all multicast packets to a single interface
multicast_router=NO # A multicast routing daemon will be run, e.g. mrouted# miscellaneous other flags
# only used if the appropriate server is marked YES above
savecore_flags= # "-z" to compress
gated_flags=
ypserv_flags= # E.g. -1 for YP v1, -d for DNS etc
yppasswdd_flags= # "-d /etc/yp" if passwd files are in /etc/yp
nfsd_flags="-tun 4" # Crank the 4 for a busy NFS fileserver
amd_dir=/tmp_mnt # AMD's mount directory
amd_master=/etc/amd/master # AMD 'master' map
syslogd_flags= # add more flags, ie. "-u -a /chroot/dev/log"
named_user=named # Named should not run as root unless necessary
named_chroot=/var/named # Where to chroot named if not empty
pf_rules=/etc/pf.conf # Packet filter rules file
pflogd_flags= # add more flags, ie. "-s 256"
afs_mount_point=/afs # Mountpoint for AFS
afs_device=/dev/xfs0 # Device used by afsd
afsd_flags=-z # Flags passed to afsd
shlib_dirs= # extra directories for ldconfiglocal_rcconf="/etc/rc.conf.local"
[ -f ${local_rcconf} ] && . ${local_rcconf} # Do not edit this line
>ты дай свой rc.conf лучше, заодно интересно посмотреть как он отличается от
>FreeBDS rc.conf
#!/bin/sh -
#
# $OpenBSD: rc.conf,v 1.79 2002/09/06 21:30:22 deraadt Exp $# set these to "NO" to turn them off. otherwise, they're used as flags
routed_flags=NO # for normal use: "-q"
altqd_flags=NO # for normal use: ""
mrouted_flags=NO # for normal use: "", if activated
# be sure to enable multicast_router below.
rarpd_flags=NO # for normal use: "-a"
bootparamd_flags=NO # for normal use: ""
rbootd_flags=NO # for normal use: ""
sshd_flags="" # for normal use: ""
smtpfwdd_flags=NO # for normal use: ""; be sure to configure smtpd(8)
# and sendmail(8) to use MSA only
named_flags="" # for normal use: ""
rdate_flags=NO # for normal use: [RFC868-host] or [-n RFC1361-host]
timed_flags=NO # for normal use: ""
ntpdate_flags=NO # for normal use: NTP server; run before ntpd starts
isakmpd_flags=NO # for normal use: ""
mopd_flags=NO # for normal use: "-a"
apmd_flags=NO # for normal use: ""
dhcpd_flags=NO # for normal use: "-q"
rtadvd_flags=NO # for normal use: list of interfaces
# be sure to set net.inet6.ip6.forwarding=1
route6d_flags=NO # for normal use: ""
# be sure to set net.inet6.ip6.forwarding=1
rtsold_flags=NO # for normal use: interface
# be sure to set net.inet6.ip6.forwarding=0
# be sure to set net.inet6.ip6.accept_rtadv=1
lpd_flags=NO # for normal use: "" (or "-l" for debugging)# use -u to disable chroot, see httpd(8)
httpd_flags=NO # for normal use: "" (or "-DSSL" after reading ssl(8))# For normal use: "-L sm-mta -bd -q30m", and note there is a cron job
sendmail_flags="-L sm-mta -C/etc/mail/localhost.cf -bd -q30m"# Set to NO if ftpd is running out of inetd
ftpd_flags=NO # for non-inetd use: "-D"# Set to NO if identd is running out of inetd
identd_flags=NO # for non-inetd use: "-b -u nobody -elo"# On some architectures, you must also disable console getty in /etc/ttys
xdm_flags=NO # for normal use: ""# For enabling console mouse support (i386 architecture only)
wsmoused_flags=NO # for ps/2 or usb mice: "", serial: "-p /dev/cua00"# set the following to "YES" to turn them on
rwhod=NO
nfs_server=NO # see sysctl.conf for nfs client configuration
lockd=NO
gated=NO
amd=NO
pf=NO # Packet filter / NAT
portmap=NO # Note: inetd(8) rpc services need portmap too
inetd=YES # almost always needed
check_quotas=YES # NO may be desirable in some YP environments
ntpd=YES # run ntpd if it existskrb5_master_kdc=NO # KerberosV master KDC. Run 'info heimdal' for help.
krb5_slave_kdc=NO # KerberosV slave KDC.
afs=NO # mount and run afs# Multicast routing configuration
# Please look at /etc/netstart for a detailed description if you change these
multicast_host=NO # Route all multicast packets to a single interface
multicast_router=NO # A multicast routing daemon will be run, e.g. mrouted# miscellaneous other flags
# only used if the appropriate server is marked YES above
savecore_flags= # "-z" to compress
gated_flags=
ypserv_flags= # E.g. -1 for YP v1, -d for DNS etc
yppasswdd_flags= # "-d /etc/yp" if passwd files are in /etc/yp
nfsd_flags="-tun 4" # Crank the 4 for a busy NFS fileserver
amd_dir=/tmp_mnt # AMD's mount directory
amd_master=/etc/amd/master # AMD 'master' map
syslogd_flags= # add more flags, ie. "-u -a /chroot/dev/log"
named_user=named # Named should not run as root unless necessary
named_chroot=/var/named # Where to chroot named if not empty
pf_rules=/etc/pf.conf # Packet filter rules file
pflogd_flags= # add more flags, ie. "-s 256"
afs_mount_point=/afs # Mountpoint for AFS
afs_device=/dev/xfs0 # Device used by afsd
afsd_flags=-z # Flags passed to afsd
shlib_dirs= # extra directories for ldconfiglocal_rcconf="/etc/rc.conf.local"
[ -f ${local_rcconf} ] && . ${local_rcconf} # Do not edit this line
она есть у тебя, этота дириктория?
>ты дай свой rc.conf лучше, заодно интересно посмотреть как он отличается от
>FreeBDS rc.conf
А может тебе его на мыло швырнуть, а то он в форум не отсылается...
>ты дай свой rc.conf лучше, заодно интересно посмотреть как он отличается от
>FreeBDS rc.conf
ДЕРЖИ...
#!/bin/sh -
#
# $OpenBSD: rc.conf,v 1.79 2002/09/06 21:30:22 deraadt Exp $# set these to "NO" to turn them off. otherwise, they're used as flags
routed_flags=NO # for normal use: "-q"
altqd_flags=NO # for normal use: ""
mrouted_flags=NO # for normal use: "", if activated
# be sure to enable multicast_router below.
rarpd_flags=NO # for normal use: "-a"
bootparamd_flags=NO # for normal use: ""
rbootd_flags=NO # for normal use: ""
sshd_flags="" # for normal use: ""
smtpfwdd_flags=NO # for normal use: ""; be sure to configure smtpd(8)
# and sendmail(8) to use MSA only
named_flags="" # for normal use: ""
rdate_flags=NO # for normal use: [RFC868-host] or [-n RFC1361-host]
timed_flags=NO # for normal use: ""
ntpdate_flags=NO # for normal use: NTP server; run before ntpd starts
isakmpd_flags=NO # for normal use: ""
mopd_flags=NO # for normal use: "-a"
apmd_flags=NO # for normal use: ""
dhcpd_flags=NO # for normal use: "-q"
rtadvd_flags=NO # for normal use: list of interfaces
# be sure to set net.inet6.ip6.forwarding=1
route6d_flags=NO # for normal use: ""
# be sure to set net.inet6.ip6.forwarding=1
rtsold_flags=NO # for normal use: interface
# be sure to set net.inet6.ip6.forwarding=0
# be sure to set net.inet6.ip6.accept_rtadv=1
lpd_flags=NO # for normal use: "" (or "-l" for debugging)# use -u to disable chroot, see httpd(8)
httpd_flags=NO # for normal use: "" (or "-DSSL" after reading ssl(8))# For normal use: "-L sm-mta -bd -q30m", and note there is a cron job
sendmail_flags="-L sm-mta -C/etc/mail/localhost.cf -bd -q30m"# Set to NO if ftpd is running out of inetd
ftpd_flags=NO # for non-inetd use: "-D"# Set to NO if identd is running out of inetd
identd_flags=NO # for non-inetd use: "-b -u nobody -elo"# On some architectures, you must also disable console getty in /etc/ttys
xdm_flags=NO # for normal use: ""# For enabling console mouse support (i386 architecture only)
wsmoused_flags=NO # for ps/2 or usb mice: "", serial: "-p /dev/cua00"# set the following to "YES" to turn them on
rwhod=NO
nfs_server=NO # see sysctl.conf for nfs client configuration
lockd=NO
gated=NO
amd=NO
pf=NO # Packet filter / NAT
portmap=NO # Note: inetd(8) rpc services need portmap too
inetd=YES # almost always needed
check_quotas=YES # NO may be desirable in some YP environments
ntpd=YES # run ntpd if it existskrb5_master_kdc=NO # KerberosV master KDC. Run 'info heimdal' for help.
krb5_slave_kdc=NO # KerberosV slave KDC.
afs=NO # mount and run afs# Multicast routing configuration
# Please look at /etc/netstart for a detailed description if you change these
multicast_host=NO # Route all multicast packets to a single interface
multicast_router=NO # A multicast routing daemon will be run, e.g. mrouted# miscellaneous other flags
# only used if the appropriate server is marked YES above
savecore_flags= # "-z" to compress
gated_flags=
ypserv_flags= # E.g. -1 for YP v1, -d for DNS etc
yppasswdd_flags= # "-d /etc/yp" if passwd files are in /etc/yp
nfsd_flags="-tun 4" # Crank the 4 for a busy NFS fileserver
amd_dir=/tmp_mnt # AMD's mount directory
amd_master=/etc/amd/master # AMD 'master' map
syslogd_flags= # add more flags, ie. "-u -a /chroot/dev/log"
named_user=named # Named should not run as root unless necessary
named_chroot=/var/named # Where to chroot named if not empty
pf_rules=/etc/pf.conf # Packet filter rules file
pflogd_flags= # add more flags, ie. "-s 256"
afs_mount_point=/afs # Mountpoint for AFS
afs_device=/dev/xfs0 # Device used by afsd
afsd_flags=-z # Flags passed to afsd
shlib_dirs= # extra directories for ldconfiglocal_rcconf="/etc/rc.conf.local"
[ -f ${local_rcconf} ] && . ${local_rcconf} # Do not edit this line
ДЕРЖИ...
#!/bin/sh -
#
# $OpenBSD: rc.conf,v 1.79 2002/09/06 21:30:22 deraadt Exp $# set these to "NO" to turn them off. otherwise, they're used as flags
routed_flags=NO # for normal use: "-q"
altqd_flags=NO # for normal use: ""
mrouted_flags=NO # for normal use: "", if activated
# be sure to enable multicast_router below.
rarpd_flags=NO # for normal use: "-a"
bootparamd_flags=NO # for normal use: ""
rbootd_flags=NO # for normal use: ""
sshd_flags="" # for normal use: ""
smtpfwdd_flags=NO # for normal use: ""; be sure to configure smtpd(8)
# and sendmail(8) to use MSA only
named_flags="" # for normal use: ""
rdate_flags=NO # for normal use: [RFC868-host] or [-n RFC1361-host]
timed_flags=NO # for normal use: ""
ntpdate_flags=NO # for normal use: NTP server; run before ntpd starts
isakmpd_flags=NO # for normal use: ""
mopd_flags=NO # for normal use: "-a"
apmd_flags=NO # for normal use: ""
dhcpd_flags=NO # for normal use: "-q"
rtadvd_flags=NO # for normal use: list of interfaces
# be sure to set net.inet6.ip6.forwarding=1
route6d_flags=NO # for normal use: ""
# be sure to set net.inet6.ip6.forwarding=1
rtsold_flags=NO # for normal use: interface
# be sure to set net.inet6.ip6.forwarding=0
# be sure to set net.inet6.ip6.accept_rtadv=1
lpd_flags=NO # for normal use: "" (or "-l" for debugging)# use -u to disable chroot, see httpd(8)
httpd_flags=NO # for normal use: "" (or "-DSSL" after reading ssl(8))# For normal use: "-L sm-mta -bd -q30m", and note there is a cron job
sendmail_flags="-L sm-mta -C/etc/mail/localhost.cf -bd -q30m"# Set to NO if ftpd is running out of inetd
ftpd_flags=NO # for non-inetd use: "-D"# Set to NO if identd is running out of inetd
identd_flags=NO # for non-inetd use: "-b -u nobody -elo"# On some architectures, you must also disable console getty in /etc/ttys
xdm_flags=NO # for normal use: ""# For enabling console mouse support (i386 architecture only)
wsmoused_flags=NO # for ps/2 or usb mice: "", serial: "-p /dev/cua00"# set the following to "YES" to turn them on
rwhod=NO
nfs_server=NO # see sysctl.conf for nfs client configuration
lockd=NO
gated=NO
amd=NO
pf=NO # Packet filter / NAT
portmap=NO # Note: inetd(8) rpc services need portmap too
inetd=YES # almost always needed
check_quotas=YES # NO may be desirable in some YP environments
ntpd=YES # run ntpd if it existskrb5_master_kdc=NO # KerberosV master KDC. Run 'info heimdal' for help.
krb5_slave_kdc=NO # KerberosV slave KDC.
afs=NO # mount and run afs# Multicast routing configuration
# Please look at /etc/netstart for a detailed description if you change these
multicast_host=NO # Route all multicast packets to a single interface
multicast_router=NO # A multicast routing daemon will be run, e.g. mrouted# miscellaneous other flags
# only used if the appropriate server is marked YES above
savecore_flags= # "-z" to compress
gated_flags=
ypserv_flags= # E.g. -1 for YP v1, -d for DNS etc
yppasswdd_flags= # "-d /etc/yp" if passwd files are in /etc/yp
nfsd_flags="-tun 4" # Crank the 4 for a busy NFS fileserver
amd_dir=/tmp_mnt # AMD's mount directory
amd_master=/etc/amd/master # AMD 'master' map
syslogd_flags= # add more flags, ie. "-u -a /chroot/dev/log"
named_user=named # Named should not run as root unless necessary
named_chroot=/var/named # Where to chroot named if not empty
pf_rules=/etc/pf.conf # Packet filter rules file
pflogd_flags= # add more flags, ie. "-s 256"
afs_mount_point=/afs # Mountpoint for AFS
afs_device=/dev/xfs0 # Device used by afsd
afsd_flags=-z # Flags passed to afsd
shlib_dirs= # extra directories for ldconfiglocal_rcconf="/etc/rc.conf.local"
[ -f ${local_rcconf} ] && . ${local_rcconf} # Do not edit this line
>ты дай свой rc.conf лучше, заодно интересно посмотреть как он отличается от
>FreeBDS rc.confДЕРЖИ...
#!/bin/sh -
#
# $OpenBSD: rc.conf,v 1.79 2002/09/06 21:30:22 deraadt Exp $# set these to "NO" to turn them off. otherwise, they're used as flags
routed_flags=NO # for normal use: "-q"
altqd_flags=NO # for normal use: ""
mrouted_flags=NO # for normal use: "", if activated
# be sure to enable multicast_router below.
rarpd_flags=NO # for normal use: "-a"
bootparamd_flags=NO # for normal use: ""
rbootd_flags=NO # for normal use: ""
sshd_flags="" # for normal use: ""
smtpfwdd_flags=NO # for normal use: ""; be sure to configure smtpd(8)
# and sendmail(8) to use MSA only
named_flags="" # for normal use: ""
rdate_flags=NO # for normal use: [RFC868-host] or [-n RFC1361-host]
timed_flags=NO # for normal use: ""
ntpdate_flags=NO # for normal use: NTP server; run before ntpd starts
isakmpd_flags=NO # for normal use: ""
mopd_flags=NO # for normal use: "-a"
apmd_flags=NO # for normal use: ""
dhcpd_flags=NO # for normal use: "-q"
rtadvd_flags=NO # for normal use: list of interfaces
# be sure to set net.inet6.ip6.forwarding=1
route6d_flags=NO # for normal use: ""
# be sure to set net.inet6.ip6.forwarding=1
rtsold_flags=NO # for normal use: interface
# be sure to set net.inet6.ip6.forwarding=0
# be sure to set net.inet6.ip6.accept_rtadv=1
lpd_flags=NO # for normal use: "" (or "-l" for debugging)# use -u to disable chroot, see httpd(8)
httpd_flags=NO # for normal use: "" (or "-DSSL" after reading ssl(8))# For normal use: "-L sm-mta -bd -q30m", and note there is a cron job
sendmail_flags="-L sm-mta -C/etc/mail/localhost.cf -bd -q30m"# Set to NO if ftpd is running out of inetd
ftpd_flags=NO # for non-inetd use: "-D"# Set to NO if identd is running out of inetd
identd_flags=NO # for non-inetd use: "-b -u nobody -elo"# On some architectures, you must also disable console getty in /etc/ttys
xdm_flags=NO # for normal use: ""# For enabling console mouse support (i386 architecture only)
wsmoused_flags=NO # for ps/2 or usb mice: "", serial: "-p /dev/cua00"# set the following to "YES" to turn them on
rwhod=NO
nfs_server=NO # see sysctl.conf for nfs client configuration
lockd=NO
gated=NO
amd=NO
pf=NO # Packet filter / NAT
portmap=NO # Note: inetd(8) rpc services need portmap too
inetd=YES # almost always needed
check_quotas=YES # NO may be desirable in some YP environments
ntpd=YES # run ntpd if it existskrb5_master_kdc=NO # KerberosV master KDC. Run 'info heimdal' for help.
krb5_slave_kdc=NO # KerberosV slave KDC.
afs=NO # mount and run afs# Multicast routing configuration
# Please look at /etc/netstart for a detailed description if you change these
multicast_host=NO # Route all multicast packets to a single interface
multicast_router=NO # A multicast routing daemon will be run, e.g. mrouted# miscellaneous other flags
# only used if the appropriate server is marked YES above
savecore_flags= # "-z" to compress
gated_flags=
ypserv_flags= # E.g. -1 for YP v1, -d for DNS etc
yppasswdd_flags= # "-d /etc/yp" if passwd files are in /etc/yp
nfsd_flags="-tun 4" # Crank the 4 for a busy NFS fileserver
amd_dir=/tmp_mnt # AMD's mount directory
amd_master=/etc/amd/master # AMD 'master' map
syslogd_flags= # add more flags, ie. "-u -a /chroot/dev/log"
named_user=named # Named should not run as root unless necessary
named_chroot=/var/named # Where to chroot named if not empty
pf_rules=/etc/pf.conf # Packet filter rules file
pflogd_flags= # add more flags, ie. "-s 256"
afs_mount_point=/afs # Mountpoint for AFS
afs_device=/dev/xfs0 # Device used by afsd
afsd_flags=-z # Flags passed to afsd
shlib_dirs= # extra directories for ldconfiglocal_rcconf="/etc/rc.conf.local"
[ -f ${local_rcconf} ] && . ${local_rcconf} # Do not edit this line
> Помогите, пожалуйста !!!
> Сижу под OpenBSD 3.2, в rc.conf прописываю: named_flags="", в комментарии
>написано так... перзапускаю машину, бзда пишет следующее:
>starting named
>named [ ] directory /var/named/ no such file or directory
>savecore: no core dump
>и т.д.
>вхожу под рутом, пишу top ессно named нет,
>но с консоли запускается, и работает нормально...
>в rc.conf пробовал менять строку named_chroot=/var/named
>система выдает какие то ошибки, но потом при входе в систему named
>
>работает...
>что делать ? подскажите, плз...изучать /etc/rc
или посмотреть:
bash-2.05a$ grep named /etc/rc.conf
named_flags="" # for normal use: ""
named_user=named # Named should not run as root unless necessary
named_chroot=/var/named # Where to chroot named if not empty
bash-2.05a$ ls -la /var/named
total 434
drwxr-xr-x 5 root wheel 512 Jun 19 14:16 .
drwxr-xr-x 24 root wheel 512 Aug 28 2001 ..
drwxr-xr-x 2 root wheel 512 Jun 19 14:19 dev
drwxr-xr-x 2 root wheel 512 Aug 16 2002 etc
-r-xr-xr-x 1 root bin 204800 Nov 17 2002 named-xfer
-rw-r--r-- 1 root wheel 1374 Feb 12 14:49 named.boot
-rw-r--r-- 1 root wheel 963 Apr 15 2002 named.boot.orig
-rw-r--r-- 1 root wheel 35 Jun 19 14:19 named.pid
drwxr-xr-x 3 named bin 512 Jun 19 14:16 namedb
bash-2.05a$ ps -axuww | grep named
named 27300 3.8 1.0 7892 312 ?? SNs Thu02PM 18:14.01 named -t /var/named -u named
lavr 16750 0.0 0.7 196 212 p2 S+ 3:36PM 0:00.09 grep named
root 7408 0.0 0.6 112 188 ?? Ss Thu02PM 1:22.12 syslogd -a /var/named/dev/log
bash-2.05a$ uname -a
OpenBSD sunct0 3.1 VVM#1 sparc
bash-2.05a$
ДЕРЖИ...
#!/bin/sh -
#
# $OpenBSD: rc.conf,v 1.79 2002/09/06 21:30:22 deraadt Exp $# set these to "NO" to turn them off. otherwise, they're used as flags
routed_flags=NO # for normal use: "-q"
altqd_flags=NO # for normal use: ""
mrouted_flags=NO # for normal use: "", if activated
# be sure to enable multicast_router below.
rarpd_flags=NO # for normal use: "-a"
bootparamd_flags=NO # for normal use: ""
rbootd_flags=NO # for normal use: ""
sshd_flags="" # for normal use: ""
smtpfwdd_flags=NO # for normal use: ""; be sure to configure smtpd(8)
# and sendmail(8) to use MSA only
named_flags="" # for normal use: ""
rdate_flags=NO # for normal use: [RFC868-host] or [-n RFC1361-host]
timed_flags=NO # for normal use: ""
ntpdate_flags=NO # for normal use: NTP server; run before ntpd starts
isakmpd_flags=NO # for normal use: ""
mopd_flags=NO # for normal use: "-a"
apmd_flags=NO # for normal use: ""
dhcpd_flags=NO # for normal use: "-q"
rtadvd_flags=NO # for normal use: list of interfaces
# be sure to set net.inet6.ip6.forwarding=1
route6d_flags=NO # for normal use: ""
# be sure to set net.inet6.ip6.forwarding=1
rtsold_flags=NO # for normal use: interface
# be sure to set net.inet6.ip6.forwarding=0
# be sure to set net.inet6.ip6.accept_rtadv=1
lpd_flags=NO # for normal use: "" (or "-l" for debugging)# use -u to disable chroot, see httpd(8)
httpd_flags=NO # for normal use: "" (or "-DSSL" after reading ssl(8))# For normal use: "-L sm-mta -bd -q30m", and note there is a cron job
sendmail_flags="-L sm-mta -C/etc/mail/localhost.cf -bd -q30m"# Set to NO if ftpd is running out of inetd
ftpd_flags=NO # for non-inetd use: "-D"# Set to NO if identd is running out of inetd
identd_flags=NO # for non-inetd use: "-b -u nobody -elo"# On some architectures, you must also disable console getty in /etc/ttys
xdm_flags=NO # for normal use: ""# For enabling console mouse support (i386 architecture only)
wsmoused_flags=NO # for ps/2 or usb mice: "", serial: "-p /dev/cua00"# set the following to "YES" to turn them on
rwhod=NO
nfs_server=NO # see sysctl.conf for nfs client configuration
lockd=NO
gated=NO
amd=NO
pf=NO # Packet filter / NAT
portmap=NO # Note: inetd(8) rpc services need portmap too
inetd=YES # almost always needed
check_quotas=YES # NO may be desirable in some YP environments
ntpd=YES # run ntpd if it existskrb5_master_kdc=NO # KerberosV master KDC. Run 'info heimdal' for help.
krb5_slave_kdc=NO # KerberosV slave KDC.
afs=NO # mount and run afs# Multicast routing configuration
# Please look at /etc/netstart for a detailed description if you change these
multicast_host=NO # Route all multicast packets to a single interface
multicast_router=NO # A multicast routing daemon will be run, e.g. mrouted# miscellaneous other flags
# only used if the appropriate server is marked YES above
savecore_flags= # "-z" to compress
gated_flags=
ypserv_flags= # E.g. -1 for YP v1, -d for DNS etc
yppasswdd_flags= # "-d /etc/yp" if passwd files are in /etc/yp
nfsd_flags="-tun 4" # Crank the 4 for a busy NFS fileserver
amd_dir=/tmp_mnt # AMD's mount directory
amd_master=/etc/amd/master # AMD 'master' map
syslogd_flags= # add more flags, ie. "-u -a /chroot/dev/log"
named_user=named # Named should not run as root unless necessary
named_chroot=/var/named # Where to chroot named if not empty
pf_rules=/etc/pf.conf # Packet filter rules file
pflogd_flags= # add more flags, ie. "-s 256"
afs_mount_point=/afs # Mountpoint for AFS
afs_device=/dev/xfs0 # Device used by afsd
afsd_flags=-z # Flags passed to afsd
shlib_dirs= # extra directories for ldconfiglocal_rcconf="/etc/rc.conf.local"
[ -f ${local_rcconf} ] && . ${local_rcconf} # Do not edit this line
ну он сюда нашвырялся, твой rc.conf, у тебя ета директория есть? проверь
> ДЕРЖИ...
>
>
>#!/bin/sh -
>#
># $OpenBSD: rc.conf,v 1.79 2002/09/06 21:30:22
>deraadt Exp $<skipped>
тпру-у-у, тормози.