Исходное сообщение
"FreeBSD и 802.1x" Отправлено Hyper Mode, 06-Май-08 09:54
Привет! У нашего проводного прова авторизация IEEE802.1X + Dynamic IP, маршрутизатор ACORP WR-G+ пролетает логин на ура и получате IP адрес. Делаю, всё, как написано, втыкаю шнурок в сервак, запускаю # /usr/local/sbin/wpa_supplicant -D wired -c /etc/wpa_supplicant.conf -i ed1 -d побежали, побежали... EAPOL: SUPP_BE entering state REQUEST EAPOL: getSuppRsp EAP: EAP entering state RECEIVED EAP: Received EAP-Request id=4 method=4 vendor=0 vendorMethod=0 EAP: EAP entering state GET_METHOD EAP: Initialize selected EAP method: vendor 0 method 4 (MD5) CTRL-EVENT-EAP-METHOD EAP vendor 0 method 4 (MD5) selected EAP: EAP entering state METHOD EAP-MD5: Generating Challenge Response EAP: method process -> ignore=FALSE methodState=DONE decision=UNCOND_SUCC EAP: EAP entering state SEND_RESPONSE EAP: EAP entering state IDLE EAPOL: SUPP_BE entering state RESPONSE EAPOL: txSuppRsp TX EAPOL: dst=01:80:c2:00:00:03 EAPOL: SUPP_BE entering state RECEIVE RX EAPOL from 00:13:49:b4:b0:50 EAPOL: Received EAP-Packet frame EAPOL: SUPP_BE entering state REQUEST EAPOL: getSuppRsp EAP: EAP entering state RECEIVED EAP: Received EAP-Success EAP: EAP entering state SUCCESS CTRL-EVENT-EAP-SUCCESS EAP authentication completed successfully EAPOL: IEEE 802.1X for plaintext connection; no EAPOL-Key frames required WPA: EAPOL processing complete Cancelling scan request Cancelling authentication timeout State: ASSOCIATED -> COMPLETED CTRL-EVENT-CONNECTED - Connection to 01:80:c2:00:00:03 completed (auth) [id=0 id_str=] EAPOL: SUPP_PAE entering state AUTHENTICATED EAPOL: SUPP_BE entering state RECEIVE EAPOL: SUPP_BE entering state SUCCESS EAPOL: SUPP_BE entering state IDLE EAPOL authentication completed successfully EAPOL: authWhile --> 0 EAPOL: startWhen --> 0 EAPOL: idleWhile --> 0 EAPOL: disable timer tick Потом останавливается на минуту, и всё заново... Вроде бы авторизацию прошел, а вот что он дальше начинает делать я не понимаю. И так до Ctrl+C. ^CCTRL-EVENT-TERMINATING - signal 2 received Removing interface ed1 State: COMPLETED -> DISCONNECTED No keys have been configured - skip key clearing EAPOL: External notification - portEnabled=0 EAPOL: SUPP_PAE entering state DISCONNECTED EAPOL: SUPP_BE entering state INITIALIZE EAP: EAP entering state DISABLED EAPOL: External notification - portValid=0 No keys have been configured - skip key clearing EAP: deinitialize previously used EAP method (4, MD5) at EAP deinit Cancelling scan request Cancelling authentication timeout ioctl[SIOC{ADD/DEL}MULTI]: No such file or directory wpa_driver_wired_deinit: Failed to remove PAE multicast group (SIOCDELMULTI) Куда копать?