Исходное сообщение
"как в IPFW указать на MAC-адрес вместо IP ?" Отправлено Gremlin19, 02-Ноя-07 23:28
>>[оверквотинг удален] >Ну вообщем, не получилось и не получается... может стоит посмотреть сюда: #man ipfw      { MAC | mac } dst-mac src-mac              Match packets with a given dst-mac and src-mac addresses, speci-              fied as the any keyword (matching any MAC address), or six groups              of hex digits separated by colons, and optionally followed by a              mask indicating the significant bits.  The mask may be specified              using either of the following methods:              1.      A slash (/) followed by the number of significant bits.                      For example, an address with 33 significant bits could be                      specified as:                            MAC 10:20:30:40:50:60/33 any              2.      An ampersand (&) followed by a bitmask specified as six                      groups of hex digits separated by colons.  For example,                      an address in which the last 16 bits are significant                      could be specified as:                            MAC 10:20:30:40:50:60&00:00:00:00:ff:ff any                      Note that the ampersand character has a special meaning                      in many shells and should generally be escaped.              Note that the order of MAC addresses (destination first, source              second) is the same as on the wire, but the opposite of the one              used for IP addresses. byte 45952