The OpenNET Project / Index page

[ новости/++ | форум | wiki | теги ]

Печать из Linux'а на принтер подключенный к Win95/NT. (samba print win)


<< Предыдущая ИНДЕКС Поиск в статьях src Установить закладку Перейти на закладку Следующая >>
Ключевые слова: samba, print, win,  (найти похожие документы)
_ RU.LINUX (2:5077/15.22) ___________________________________________ RU.LINUX _ From : Michael Bravo 2:5030/10 30 May 97 14:21:02 Subj : Re: Печать из Linux'а на принтер подключенный к Win95/NT. ________________________________________________________________________________ Nick E. Milogradsky (Nick.Milogradsky@mn.vsu.ru) wrote: > > - Сервер под Linux'ом c Samb'ой; > - Есть рабочки с Win95 (или NT) с подключенными > к ним принтерами, доступными для остальных. Уф. Hик, у меня твои письма лежат :) извини. У меня есть некий summary по этому поводу, сейчас я его выдеру из архива. 1) письмо от Владимира Тимохина - Вот так у меня сделано. Принтер делится без пароля. Правда samba достаточно старая... /etc/printcap ------------------------------------------------------------------------ # @(#)printcap 5.3 (Berkeley) 6/30/90 lp|windows remote line printer:\ :lp=/dev/null:sd=/var/spool/output/lpwd:lf=/var/log/lpd-errs:\ :sh:if=/usr/libexec/lpr/smbprint: ------------------------------------------------------------------------ /usr/libexec/lpr/smbprint ------------------------------------------------------------------------ #!/bin/sh PRN='\\WIN95NAME\PRINTERNAME' SMBCLIENT="/usr/local/samba/bin/smbclient $PRN -P -N" CAT="/bin/cat" TODOS="/usr/local/bin/todos" raw=0 while [ $# -gt 0 ] do case $1 in -c*) raw=1 ;; -w*) sw="width"; width=`expr $1 : '..\(.*\)` ;; -l*) sw="height"; height=`expr $1 : '..\(.*\)` ;; -i*) sw="indent"; indent=`expr $1 : '..\(.*\)` ;; -n*) sw="login"; shift; login=$1 ;; -h*) sw="host"; shift; host=$1 ;; *) acct=$1 ;; esac shift done ( echo print - ## ## echo : $raw : $width : $height : $indent : $login : $host : $acct : ## if [ $raw = 0 ] then $TODOS else $CAT fi ## ## echo ## ) | $SMBCLIENT exit $? ------------------------------------------------------------------------ С уважением, Vladimir Timohin <wowa@vltsb.vladimir.su>; (2:5024/8) 2) письмо от иностранца :) I'll try to give you as much information as I have, it's been a while since I installed this thing. I'm running Redhat 4.1 and I'm not sure how much the config files will help with another version of Linux. I also upgraded to the latest version of ghostscript that I could find in the contrib folder at ftp.redhat.com. If you need anything else, don't hesitate to ask. First of all, here's my printcap: --------------------------------------------------------------------------- # /etc/printcap # # Please don't edit this file directly unless you know what you are doing! # Be warned that the control-panel printtool requires a very strict format! # Look at the printcap(5) man page for more info. # # This file can be edited with the printtool in the control-panel. ##PRINTTOOL3## SMB ljet4 600x600 a4 {} LaserJet4 Default {} lp:\ :sd=/var/spool/lpd/lp:\ :mx#0:\ :sh:\ :if=/var/spool/lpd/lp/filter:\ :af=/var/spool/lpd/lp/acct:\ :lp=/dev/null: ##PRINTTOOL3## SMB cdj550 300x300 a4 {} DeskJet550 1 1 hpdj:\ :sd=/var/spool/lpd/hpdj:\ :mx#0:\ :sh:\ :if=/var/spool/lpd/hpdj/filter:\ :af=/var/spool/lpd/hpdj/acct:\ :lp=/dev/null: --------------------------------------------------------------------------- Then there's the /etc/smb.conf --------------------------------------------------------------------------- ; The global setting for a RedHat default install ; Make sure and restart the server after making changes to this file, ex: ; /etc/rc.d/init.d/smb stop ; /etc/rc.d/init.d/smb start [global] printing = bsd printcap name = /etc/printcap load printers = yes ; Uncomment this if you want a guest account ; guest account = pcguest log file = /var/log/samba lock directory = /var/lock/samba share modes = yes [homes] comment = Home Directories browseable = no read only = no create mode = 0750 [printers] comment = All Printers browseable = no printable = yes public = no writable = no create mode = 0700 ;[tmp] ; comment = Temporary file space ; path = /tmp ; read only = no ; public = yes ; A publicly accessible directory, but read only, except for people in ; the staff group [public] comment = Public Stuff path = /home/samba public = yes writable = yes printable = no write list = @staff --------------------------------------------------------------------------- And this is the file /var/spool/lpd/lp/general.cfg --------------------------------------------------------------------------- # # General config options for printing on this queue # Generated by PRINTTOOL, do not modify. # export DESIRED_TO=ps export PAPERSIZE=a4 export PRINTER_TYPE=SMB export ASCII_TO_PS=YES --------------------------------------------------------------------------- This is the file /var/spool/lpd/lp/postscript.cfg --------------------------------------------------------------------------- # # configuration related to postscript printing # generated automatically by PRINTTOOL # manual changes to this file may be lost # GSDEVICE=ljet4 RESOLUTION=600x600 COLOR= PAPERSIZE=a4 EXTRA_GS_OPTIONS= REVERSE_ORDER= PS_SEND_EOF=NO --------------------------------------------------------------------------- This is the file /var/spool/lpd/lp/textonly.cfg --------------------------------------------------------------------------- # # text-only printing options for printing on this queue # Generated by PRINTTOOL, do not modify. # TEXTONLYOPTIONS= CRLFTRANS= TEXT_SEND_EOF=NO --------------------------------------------------------------------------- This is the file /var/spool/lpd/lp/filter --------------------------------------------------------------------------- #!/bin/bash # # # New smart print filter # # # determines input file magic # # looks in the default filter plugin (FPI) directory # finds all *.fpi files, then finds a combination that will # yield the desired file type, or will indicate this is impossible. # function filtfrom { echo -ne ${1%-to-*} } function filtto { echo -ne ${1#*-to-} } # # given filters as input vars, find next level available given the # first arg is the starting point # function nextlvl { local try local start local all local depth # # # $1 is starting point, find something that will work # start="$1" shift depth="$1" shift all="$@" # # get out of here if too deep! # if [ $depth -ge $MAX_DEPTH ]; then return 1 fi if [ $DEBUG_TREE ]; then echo "Starting point = $start" >> /tmp/filter.debug fi if [ $(filtto $start) = $DESIRED_TO ]; then echo " DONE" return 0 fi while [ $1 ]; do try=$1 shift if [ $DEBUG_TREE ]; then echo "for $start trying $try" >> /tmp/filter.debug fi if [ $(filtfrom $try) = $(filtto $start) ]; then echo -n "$start.fpi:$depth:CONT " if [ $(filtto $try) = $DESIRED_TO ]; then echo -n "$try.fpi:$((depth+1)):DONE " return 0 else # echo -n $try nextlvl $try $((depth+1)) $all # echo "|G is $G| " if [ $DEBUG_TREE ]; then echo "|rt is $?|" >> /tmp/filter.debug fi if [ "$?" = "0" ] then if [ $DEBUG_TREE ]; then echo "for $start we are done" >> /tmp/filter.debug fi # return 0 else if [ $DEBUG_TREE ]; then echo "for $start we have failed" >> /tmp/filter.debug fi return 1 fi fi fi # echo "" done } # # MAIN # # # # # setup some global variables used by this script # # # # FPIDIR points to where print filter plug-ins are stored # Normally these will be installed with a package via RPM # FPIDIR=/usr/lib/rhs/printtool PATH=${FPIDIR}:${PATH} # # MAX_DEPTH determines how long a string of filters will be # tried as a possible printing solution. How many input # formats will take 6 filters to output Postscript! # Unlikely this will need to be changed. # MAX_DEPTH=6 # # define these to gets lots of feedback # output is appended on /tmp/filter.debug # DEBUG_TREE="" DEBUG_FILTER="" # # Setup variables available to all filter plug-ins # # # # SPOOLDIR is directory which lpd is spooling from # export SPOOLDIR=$(pwd) # # Get queue specific information (which was written by printtool) # source ${SPOOLDIR}/general.cfg if [ "$DEBUG_FILTER" != "" ]; then echo "Desired print format is $DESIRED_TO" >> /tmp/filter.debug echo "Paper size is $PAPERSIZE" >> /tmp/filter.debug echo -n "A form feed will " >> /tmp/filter.debug if [ "$SEND_EOF" = "" ]; then echo "not be sent." >> /tmp/filter.debug else echo "be sent." >> /tmp/filter.debug fi fi cd $FPIDIR fpis=$(ls *.fpi 2> /dev/null | tr '\n' ' ' | sed 's/\.fpi//g') # # let's see if its a compressed file first # # # Figure out the magic of the input file # magic=$(file -) $FPIDIR/rewindstdin magic=${magic#*: } if [ "$DEBUG_FILTER" != "" ]; then echo "Magic is |$magic|" >> /tmp/filter.debug fi case `echo $magic | tr 'A-Z' 'a-z'` in *packed*|*gzip*|*compress* ) DECOMPRESS="gzip -dc";; * ) DECOMPRESS="";; esac # # Figure out the magic of the input file # if [ "$DECOMPRESS" = "" ]; then magic=$(file -) else magic=$($DECOMPRESS - | file -) fi $FPIDIR/rewindstdin magic=${magic#*: } if [ "$DEBUG_FILTER" != "" ]; then echo "Magic is |$magic|" >> /tmp/filter.debug fi case `echo $magic | tr 'A-Z' 'a-z'` in "pc bitmap data"* ) startpnt="INPUT-to-bmp";; "gif image data"* ) startpnt="INPUT-to-gif";; "jpeg image data"* ) startpnt="INPUT-to-jpeg";; "tiff image data"* ) startpnt="INPUT-to-tiff";; "sun raster image data"* ) startpnt="INPUT-to-rast";; "pgm"*|"pbm"*|"ppm"* ) startpnt="INPUT-to-pnm";; postscript* ) startpnt="INPUT-to-ps";; "tex dvi file"* ) startpnt="INPUT-to-dvi";; "fig image text"* ) startpnt="INPUT-to-fig";; "troff or preprocessor"* ) startpnt="INPUT-to-troff";; "rpm"* ) startpnt="INPUT-to-rpm";; *ascii*|*text*|*english*|*script* ) startpnt="INPUT-to-asc";; *data*|*escape* ) startpnt="INPUT-to-prdata";; *pcl* ) startpnt="INPUT-to-prdata";; * ) startpnt="INPUT-to-unknown";; esac # # here is where we could put in hook to call user routine(s) to # handle extra magics they've defined filters for # # call_user_magic_hook() # if [ "$DEBUG_FILTER" != "" ]; then echo "Type of file is $startpnt" >> /tmp/filter.debug fi if [ "$startpnt" = "Dont know" ]; then echo "Error - input file type is unknown - cannot print" exit 1 fi # # catch some easy cases without having to figure out best path the hard way # bestpath="" foundbest="NO" if [ $(filtto $startpnt) = "asc" ]; then if [ "$ASCII_TO_PS" = "NO" ]; then bestpath="$startpnt | asc-to-printer.fpi" foundbest="YES" fi elif [ $(filtto $startpnt) = "prdata" ]; then bestpath="$startpnt | cat -" foundbest="YES" elif [ $(filtto $startpnt) = $DESIRED_TO ]; then bestpath="$startpnt | $DESIRED_TO-to-printer.fpi" foundbest="YES" fi if [ "$foundbest" != "YES" ]; then # # we go through and find best path # G=`nextlvl "$startpnt" "0" $fpis` if [ "$DEBUG_FILTER" != "" ]; then echo "$G" >> /tmp/filter.debug fi # # now sort out the best path of all available # # # if no processing required, depth will equal 'DONE' # if [ "${G# *}" != "DONE" ]; then root="" bestdepth=$((MAX_DEPTH*2)) bestpath="" curdepth="0" depth="0" foundbest="NO" for i in $G; do entry=${i%%:*} depth=${i#*:} depth=${depth%:*} if [ $depth -le $curdepth ]; then while [ $(($depth <= $curdepth && $curdepth >= 0)) -eq 1 ]; do root=${root%* | *} curdepth=$(($curdepth - 1)) done fi if [ $(($curdepth < 0)) -eq 1 ]; then root="" fi curdepth=$depth if [ "$root" = "" ]; then root="$entry" else root="$root | $entry" fi if [ ${i##*:} = "DONE" ]; then if [ "$DEBUG_FILTER" != "" ]; then echo "$root -> depth = $depth" >> /tmp/filter.debug fi if [ $depth -lt $bestdepth ]; then foundbest="YES" bestdepth=$depth bestpath=$root fi fi done fi if [ "$foundbest" = "YES" ]; then bestpath="$bestpath | $DESIRED_TO-to-printer.fpi" fi # # end of doing it the hard way # fi # # we have to add filter to convert desired format to something the # printer can handle. May be as simple as 'cat' # # # ok we got here, and if input data magic is 'data' we'll let it # through, hoping it really will work on the printer! # Note we still reject lots of magics, like ELF, by doing this # which is what we want # # # getting bad, but trapping all "special" cases here # # if [ "$foundbest" = "NO" ]; then printf "No way to print this type of input file: $magic \014" exit 0 else # # fix up the best path so we can run it # if [ "$DECOMPRESS" = "" ]; then bestpath="cat - ${bestpath#* }" else bestpath="$DECOMPRESS ${bestpath#* }" fi fi # # any post-filter to run (like smbclient?) # if [ "$PRINTER_TYPE" = "SMB" ]; then bestpath="$bestpath | ${FPIDIR}/smbprint ${SPOOLDIR}/acct" fi if [ "$DEBUG_FILTER" != "" ]; then echo "Best path of depth $bestdepth is $bestpath" >> /tmp/filter.debug fi # # run the command! # eval $bestpath # # # see if we need to send a form feed to eject the page from printer # # if [ "$SEND_EOF" != "" ]; then # printf "\014" # fi exit 0 --------------------------------------------------------------------------- This is the file /var/spool/lpd/lp/.config --------------------------------------------------------------------------- share='\\helga\laser4L' user=spike password=insert_password That's about it :-) Again, in case you should need anything else feel free to ask. Oliver J. Albrecht <olli@allcon.net> -- /\/\ike PGP public key 67C4EA8EEBF67C51 fingerprint 2C8B78790C8ADCDC --- ifmail v.2.8c * Origin: The Communication Tube (2:5030/10@fidonet)

<< Предыдущая ИНДЕКС Поиск в статьях src Установить закладку Перейти на закладку Следующая >>

Ваш комментарий
Имя:         
E-Mail:      
Заголовок:
Текст:





  Закладки на сайте
  Проследить за страницей
Created 1996-2017 by Maxim Chirkov  
ДобавитьРекламаВебмастеруГИД  
Hosting by Ihor