The OpenNET Project / Index page

[ новости/++ | форум | wiki | теги ]

Пример скрипта автоматической настройки dummynet во FreeBSD (ipfw freebsd traffic dummynet bandwidth shaper)


<< Предыдущая ИНДЕКС Исправить src / Печать Следующая >>
Ключевые слова: ipfw, freebsd, traffic, dummynet, bandwidth, shaper,  (найти похожие документы)
From: Pavel Ustyugov Newsgroups: email Date: Mon, 24 Mar 2008 18:21:07 +0000 (UTC) Subject: Пример скрипта автоматической настройки dummynet во FreeBSD Автоматический скрипт настройки firewall (ipfw) + shaper (dummynet) для двух-интерфейсной шлюзловой машины под FreeBSD. Данный скрипт расчитан на то, что кроме интернет шлюза, других сервисов на машине нет - иначе придется сделать соответствующие изменения в фаерволе. В скрипт включена поддержка шейпера dummynet. Вся конфигурация выполняется в виде списков доступа, что упрощает настройку фаервола неопытным пользователем, также предусмотрена некоторая оптимизация, отключающая неиспользуемые правила. Дополнительно реализованно несколько полезных с хозяйстве вешей (см. ниже коментарии в самом скрипте). В остальном скрипт базируется на стандартном /etc/rc.firewall. Что касается использования dummynet: настройка каналов может быть не оптимальной, но как рабочий вариант вполне годится (man ipfw, man dummynet по вопросам тюнинга). В крипте используется дуплексная эмуляция канала с отдельной настройкой ширины в каждом напрвлении, с последующей группировкой пользовательких каналов в коллективную трубу. Возможна группировка ip адрессов пользователей в произвольное количество групп (в скрипте реализовано 3 группы, количество групп несложно увеличить) с возможностью дальнейшего задания толщины канала для каждой группы индивидуально. И кое-что ещо - смотрите коментарии скрипта. Скрипт приведен с примером рабочей конфигурации (ip адреса вымышленные). P.S. может комуто понравится или даже поможет :) # /etc/rc.firewall # Firewall (ipfw) + shaper (dummynet) for gateway host (with natd) # Automated ipfw setup script for FreeBSD # v 0.7 # (CopyLeft) Pavel Ustyugov aka Pahanivo # ################################################################################ # # !!! WARNING !!! # # Misconfiguring the firewall can put your computer in an unusable state, # possibly shutting down network services and requiring console access to # regain control of it. # ################################################################################ # # Usage: # make your own settings # copy this file to /etc/rc.firewall # cd /etc # ./netstart & # # For testing use (only show list of rules, do not apply # onto current firewall): # cd /etc # chmod 744 rc.firewall # ./rc.firewall testmode # Warning: if you run ./rc.firewall without arguments or with any other # arguments - firewall will reloaded and settings will apllied. # ################################################################################ # # Before use this firewall you need to compile kernel with options: # (or load some as module) # # #IPFW (required) # options IPFIREWALL # #enable verbose mode (for `log` options, optional) # options IPFIREWALL_VERBOSE # #enable forward rules (optional) # options IPFIREWALL_FORWARD # #default rule - allow any to any (optional) # options IPFIREWALL_DEFAULT_TO_ACCEPT # # #divert socket (required for natd) # options IPDIVERT # # #dummynet shaper (required, if you want use shaper) # options DUMMYNET # #enable device polling (recomended) # #you need enable polling on interface too - man polling # options DEVICE_POLLING # #pooling frequency (strongly recomended) # options HZ=1000 (or HZ=2000) # ################################################################################ # # Shaper scheme (for incoming traffice) # ############################## # # --------------------external interface / incoming traffic--------------------- # > > # > Unrestricted external resources group > # > res1->all_users >=================== unlimit ====================> > # > res2->all_users >=================== unlimit ====================> > # > ... > # > > # > Unrestricted users group > # > internet->users1 >================== unlimit ====================> > # I internet->users2 >================== unlimit ====================> > # N ... > # C > # O Restricted external resources groups > # M Group 1 ---+ > # I res1_1->all_users \ \ > # N res1_2->all_users >==2048Kbit/s per user==> \ > # G res1_3->all_users / +-----------------\ > # > Group 2 10240Kbit/s total > > # > res2_1->all_users \ +-----------------/ > # > res2_2->all_users >==1024Kbit/s per user==> / > # T res3_3->all_users / / > # R ... ---+ > # A > # F Restricted users groups > # F Group 1 ---+ > # I internet->user1_1 \ \ > # C internet->user1_2 >==128Kbit/s per user==> \ > # > internet->user1_3 / +-----------------\ > # > Group 2 1024Kbit/s total > > # > internet->user2_1 \ +-----------------/ > # > internet->user2_2 >==256Kbit/s per user==> / > # > internet->user2_3 / / > # > ... ---+ > # > > # > Other ungrouped traffic >============= unlimit ====================> > # > > # --------------------external interface / incoming traffic--------------------- # # Scheme for outgoing traffic absolutely analogous, but outgoing shaper work # on internal interface and all traffic directions in scheme is inverted. # Traffic bw for incoming and outgoing shapers setup separately. # ################################################################################ # Setup ################################################################################ #Prepare to work ############################## #Before use this script - recomend to set net.inet.ip.fw.autoinc_step=5 #or less. Use sysctl or /etc/sysctl.conf #System paths ipfw_cmd="/sbin/ipfw" grep_cmd="/usr/bin/grep" dev_null="/dev/null" ################################################################################ #IPFW interfaces setup ############################## #Interfaces setup #Outside interface setup oif="xl0" onet="123.123.32.0" omask="255.255.255.248" oip="123.123.32.1" #Inside interface setup iif="fxp0" inet="192.168.0.0" imask="255.255.0.0" iip="192.168.0.1" ################################################################################ #Access lists setup ############################## #ACL - list of allowed (or denied) IPs or newtworks in CIDR notation #ACL may contain comments, but any comments in ACL must begin from `#` #and not contain any space chars (because ACL process by word). #ACLs maybe used in any script's loop (see below). #Any of this ACLs maybe loaded from file. Use "`cat /path/file_name`" #command inside ACL for loading from file. #Example: # pass_lan_users_acl=" # 10.0.1.0/24 # 10.0.2.0/24 # `cat /etc/ALLOWED_USERS` # " #Denied external hosts #You can use this for stoping attacks from outside. deny_wan_hosts_acl=" #flooder 123.123.0.233 " #From LAN to Internet access #Denied IPs process before allowed. Access allowed for all IPs in #allowed ACL except IPs in denied ACL. #Denied LAN users deny_lan_users_acl=" #stupids 192.168.10.15 192.168.10.33 " #Allowed LAN users pass_lan_users_acl=" 192.168.0.0/16 " #Anti-spambot protection #Reject all incoming connection from LAN to any external SMTP servers, #except allowed servers (yes or no) anti_spambot_enable="yes" #Allowed SMTP servers #If this ACL empty, anti-spambot feature will automatically disabled, #and traffic to any SMTP servers will allowed. anti_spambot_allowed_servers_acl=" #own_smtp_relay 123.123.32.2 #own_smtp_relay 123.123.32.3 #provider_smtp_relay 123.123.0.11 " #SSH #SSH access to this server from outside pass_ssh_acl=" #admin1 124.124.124.124 #admin2 125.125.125.125 " #Shaper's ACLs #Enable shaper (yes or no) shaper_enable="yes" #Not shaped external resouces #All LAN users will have unlimited bw to and from this IPs. not_shaped_ext_res_acl=" #own_smtp_relay 123.123.32.2 #own_smtp_relay 123.123.32.3 #provider_smtp_relay 123.123.0.11 " #Not shaped users #This users will have unlimit bw from and to any. not_shaped_users_acl=" #Admin's_net 192.168.33.0/24 " #Shaped external resources - similarly to `shaped user` (see below), but for #specific external hosts only. Traffic match this shaper not process by #`shaped user`. #External resource group 1 shaped_ext_res_g1_name="own_dataservers" shaped_ext_res_g1_acl=" #own_dataservers 123.123.32.4 123.123.32.5 " #External resource group 2 shaped_ext_res_g2_name="isp_dataservers" shaped_ext_res_g2_acl=" #isp_dataservers 123.123.0.2 123.123.0.3 123.123.0.4 " #External resource group 3 shaped_ext_res_g3_name="servers_3" shaped_ext_res_g3_acl=" " #Add more groups below #... #Shaped users - will have restricted bw. Other allowed users will have unlimit #bw from any to any (except shaped external resources). Shaped users separated #by groups. See below for restrictions setup for all groups. #Groups process in succession: group 1, group 2 etc. Inside group IPs process #in list order. Once processed IP (or subnet) will not process more. #Because overlaps in group and between groups not a problem. #User group 1 shaped_users_g1_name="slow" shaped_users_g1_acl=" #looosers 192.168.20.0/24 192.168.21.1 192.168.21.2 " #User group 2 shaped_users_g2_name="fast" shaped_users_g2_acl=" #BOSS 192.168.0.5 " #User group 3 shaped_users_g3_name="default" shaped_users_g3_acl=" 192.168.0.0/16 " #Add more groups below #... ################################################################################ #Pipes setup (shaper) ############################## #Shaped external resources #External resources group 1 #Pipe's number shaped_ext_res_g1_pipe_num_in="1011" shaped_ext_res_g1_pipe_num_out="1012" #BW shaped_ext_res_g1_bw_in="3Mbit/s" shaped_ext_res_g1_bw_out="3Mbit/s" #Queue size, in slots or KBytes (see man ipfw). shaped_ext_res_g1_q_in="50" shaped_ext_res_g1_q_out="50" #External resources group 2 #Pipe's number shaped_ext_res_g2_pipe_num_in="1021" shaped_ext_res_g2_pipe_num_out="1022" #BW shaped_ext_res_g2_bw_in="1024Kbit/s" shaped_ext_res_g2_bw_out="1024Kbit/s" #Queue size, in slots or KBytes (see man ipfw). shaped_ext_res_g2_q_in="50" shaped_ext_res_g2_q_out="50" #External resources group 3 #Pipe's number shaped_ext_res_g3_pipe_num_in="1031" shaped_ext_res_g3_pipe_num_out="1032" #BW shaped_ext_res_g3_bw_in="512Kbit/s" shaped_ext_res_g3_bw_out="512Kbit/s" #Queue size, in slots or KBytes (see man ipfw). shaped_ext_res_g3_q_in="40" shaped_ext_res_g3_q_out="40" #Add more groups below #... #Collective external resource's pipe (max allowed summary bw for #external resources, except not shaped). #Pipe's number sum_shaped_ext_res_pipe_num_in="1901" sum_shaped_ext_res_pipe_num_out="1902" #BW sum_shaped_ext_res_bw_in="6Mbit/s" sum_shaped_ext_res_bw_out="6Mbit/s" #Queue size, in slots or KBytes (see man ipfw) sum_shaped_ext_res_q_in="50" sum_shaped_ext_res_q_out="50" #Personal pipe for each user (with separate by group) #User group 1 #Pipe's number shaped_users_g1_pipe_num_in="2011" shaped_users_g1_pipe_num_out="2012" #BW shaped_users_g1_bw_in="160Kbit/s" shaped_users_g1_bw_out="160Kbit/s" #Queue size, in slots or KBytes (see man ipfw). shaped_users_g1_q_in="18" shaped_users_g1_q_out="18" #User group 2 #Pipe's number shaped_users_g2_pipe_num_in="2021" shaped_users_g2_pipe_num_out="2022" #BW shaped_users_g2_bw_in="512Kbit/s" shaped_users_g2_bw_out="512Kbit/s" #Queue size, in slots or KBytes (see man ipfw). shaped_users_g2_q_in="40" shaped_users_g2_q_out="40" #User group 3 #Pipe's number shaped_users_g3_pipe_num_in="2031" shaped_users_g3_pipe_num_out="2032" #BW shaped_users_g3_bw_in="256Kbit/s" shaped_users_g3_bw_out="256Kbit/s" #Queue size, in slots or KBytes (see man ipfw). shaped_users_g3_q_in="25" shaped_users_g3_q_out="25" #Add more groups below #... #Collective user's pipe (max allowed summary bw for users, except not #shaped). #Pipe's number sum_shaped_users_pipe_num_in="2901" sum_shaped_users_pipe_num_out="2902" #BW sum_shaped_users_bw_in="768Kbit/s" sum_shaped_users_bw_out="768Kbit/s" #Queue size, in slots or KBytes (see man ipfw) sum_shaped_users_q_in="50" sum_shaped_users_q_out="50" ################################################################################ #Numeration ############################## #All ipfw rules split onto section. First rule in each section #begin from fixed number. All other rules will numbers by ipfw, consider #net.inet.ip.fw.autoinc_step. This script use `skipto` rules, because #needs for fixed number. Usually you don't need to change this values, #if you have problems this large quantity of rules only. f_num_acb=1000 f_num_aacb=2000 f_num_outshb=3000 f_num_routshb=4000 f_num_routshb_inj=5500 f_num_uoutshb=6000 f_num_uoutshb_inj=7500 f_num_natb=8000 f_num_inshb=9000 f_num_rinshb=10000 f_num_rinshb_inj=11500 f_num_uinshb=12000 f_num_uinshb_inj=13500 f_num_stdb=14000 f_num_pcb=30000 # please read below about this f_num_lastb=40000 ################################################################################ #Auto-config ############################## for loop in \ ${shaped_ext_res_g1_acl} \ ${shaped_ext_res_g2_acl} \ ${shaped_ext_res_g3_acl} do echo $loop | ${grep_cmd} -v "^#" > ${dev_null} if [ $? -eq 0 ]; then shaped_ext_res_ne_flag="yes" break fi done for loop in \ ${shaped_users_g1_acl} \ ${shaped_users_g2_acl} \ ${shaped_users_g3_acl} do echo $loop | ${grep_cmd} -v "^#" > ${dev_null} if [ $? -eq 0 ]; then shaped_users_ne_flag="yes" break fi done for loop in ${anti_spambot_allowed_servers_acl} do echo $loop | ${grep_cmd} -v "^#" > ${dev_null} if [ $? -eq 0 ]; then anti_spambot_allowed_servers_ne_flag="yes" break fi done if [ -z ${anti_spambot_allowed_servers_ne_flag} ]; then anti_spambot_enable="no" fi if [ -z ${shaped_ext_res_ne_flag} ] && [ -z ${shaped_users_ne_flag} ]; then shaper_enable="no" fi if [ "$1" = "testmode" ]; then ipfw_cmd="echo ipfw" fi ################################################################################ # Firewall rules ################################################################################ #Flush all before set new rules ${ipfw_cmd} -f flush ${ipfw_cmd} -f pipe flush ${ipfw_cmd} -f queue flush ################################################################################ #Loopback rules (required) ${ipfw_cmd} add pass all from any to any via lo0 // loopback ${ipfw_cmd} add deny all from any to 127.0.0.0/8 // loopback ${ipfw_cmd} add deny all from 127.0.0.0/8 to any // loopback ############################################################################### # Stop spoofing ${ipfw_cmd} add deny all from ${inet}:${imask} to any in via ${oif} // anti-spoofing ${ipfw_cmd} add deny all from ${onet}:${omask} to any in via ${iif} // anti-spoofing ############################################################################### #Access control ############################## #Denied external hosts #Apply deny_wan_hosts_acl for loop in ${deny_wan_hosts_acl} do echo $loop | ${grep_cmd} -v "^#" > ${dev_null} if [ $? -eq 0 ]; then ${ipfw_cmd} add deny all from $loop to any in via ${oif} // denied WAN IPs fi done #Skip all incoming traffic up to divert rules ${ipfw_cmd} add skipto ${f_num_natb} all from any to any in via ${oif} // skip incoming traffic up to NAT #Allow ICMP for all from inside ${ipfw_cmd} add skipto ${f_num_outshb} icmp from ${inet}:${imask} to any in via ${iif} // allow ICMP for any from inside #Access from LAN ${ipfw_cmd} add ${f_num_acb} count all from any to any // begin access control block #Allow SSH from LAN if you are accidentally add yourself in denied users list for loop in ${deny_lan_users_acl} do echo $loop | ${grep_cmd} -v "^#" > ${dev_null} if [ $? -eq 0 ]; then ${ipfw_cmd} add skipto ${f_num_stdb} tcp from ${inet}:${imask} to ${iip} 22 in via ${iif} // allow SSH from LAN for allowed users break fi done #Apply deny_lan_users_acl for loop in ${deny_lan_users_acl} do echo $loop | ${grep_cmd} -v "^#" > ${dev_null} if [ $? -eq 0 ]; then ${ipfw_cmd} add deny all from $loop to any in via ${iif} // denied LAN IPs fi done #Apply pass_lan_users_acl for loop in ${pass_lan_users_acl} do echo $loop | ${grep_cmd} -v "^#" > ${dev_null} if [ $? -eq 0 ]; then ${ipfw_cmd} add skipto ${f_num_aacb} all from $loop to any in via ${iif} // allowed LAN IPs fi done #Default rule - deny all not in pass_lan_users_acl ${ipfw_cmd} add deny all from any to any in via ${iif} // deny not allowed LAN IPs #Additional access control ${ipfw_cmd} add ${f_num_aacb} count all from any to any // begin additional access control block case ${anti_spambot_enable} in [Yy][Ee][Ss]) #Anti-spambot #Apply anti_spambot_allowed_servers_acl for loop in ${anti_spambot_allowed_servers_acl} do echo $loop | ${grep_cmd} -v "^#" > ${dev_null} if [ $? -eq 0 ]; then ${ipfw_cmd} add skipto ${f_num_outshb} all from ${inet}:${imask} to ${loop} 25 in via ${iif} // Anti-spambot - allowed servers fi done ${ipfw_cmd} add deny log all from ${inet}:${imask} to any 25 in via ${iif} // Anti-spambot - deny all other servers ;; *) ;; esac #Stop windows flood from inside ${ipfw_cmd} add deny all from ${inet}:${imask} to ${inet}:${imask} 135,137-139,445 in via ${iif} // Stop windows flood from inside ############################################################################### #Inject to pipes (outgoing packets) ############################## case ${shaper_enable} in [Yy][Ee][Ss]) ${ipfw_cmd} add ${f_num_outshb} count all from any to any // begin shaper block \|out\| if [ ! -z ${shaped_ext_res_ne_flag} ]; then #Not shaped resources #Apply not_shaped_ext_res_acl for loop in ${not_shaped_ext_res_acl} do echo $loop | ${grep_cmd} -v "^#" > ${dev_null} if [ $? -eq 0 ]; then ${ipfw_cmd} add skipto ${f_num_natb} all from ${inet}:${imask} to ${loop} in via ${iif} // skip not shaped resources \|out\| fi done fi if [ ! -z ${shaped_users_ne_flag} ]; then #Not shaped users #Apply not_shaped_users_acl for loop in ${not_shaped_users_acl} do echo $loop | ${grep_cmd} -v "^#" > ${dev_null} if [ $? -eq 0 ]; then ${ipfw_cmd} add skipto ${f_num_natb} all from ${loop} to any in via ${iif} // skip not shaped users \|out\| fi done fi #External resources pipes if [ ! -z ${shaped_ext_res_ne_flag} ]; then ${ipfw_cmd} add ${f_num_routshb} count all from any to any // begin external resources shaper block \|out\| #External resources group 1 #Apply shaped_ext_res_g1_acl for loop in ${shaped_ext_res_g1_acl} do echo $loop | ${grep_cmd} -v "^#" > ${dev_null} if [ $? -eq 0 ]; then ${ipfw_cmd} add skipto ${f_num_routshb_inj} tag ${shaped_ext_res_g1_pipe_num_out} all from ${inet}:${imask} to ${loop} in via ${iif} // tagging \|out\| shaped_ext_res_g1_ne_flag="yes" fi done #External resources group 2 #Apply shaped_ext_res_g2_acl for loop in ${shaped_ext_res_g2_acl} do echo $loop | ${grep_cmd} -v "^#" > ${dev_null} if [ $? -eq 0 ]; then ${ipfw_cmd} add skipto ${f_num_routshb_inj} tag ${shaped_ext_res_g2_pipe_num_out} all from ${inet}:${imask} to ${loop} in via ${iif} // tagging \|out\| shaped_ext_res_g2_ne_flag="yes" fi done #External resources group 3 #Apply shaped_ext_res_g3_acl for loop in ${shaped_ext_res_g3_acl} do echo $loop | ${grep_cmd} -v "^#" > ${dev_null} if [ $? -eq 0 ]; then ${ipfw_cmd} add skipto ${f_num_routshb_inj} tag ${shaped_ext_res_g3_pipe_num_out} all from ${inet}:${imask} to ${loop} in via ${iif} // tagging \|out\| shaped_ext_res_g3_ne_flag="yes" fi done #Add more groups below #... ${ipfw_cmd} add ${f_num_routshb_inj} count all from any to any // begin inject tagged to pipes block \|out\| #Inject tagged to pipes #Per user pipes if [ ! -z ${shaped_ext_res_g1_ne_flag} ]; then ${ipfw_cmd} add pipe ${shaped_ext_res_g1_pipe_num_out} all from any to any in via ${iif} tagged ${shaped_ext_res_g1_pipe_num_out} // pipe \(${shaped_ext_res_g1_name}:${shaped_ext_res_g1_bw_out}:${shaped_ext_res_g1_q_out}\) \|out\| fi if [ ! -z ${shaped_ext_res_g2_ne_flag} ]; then ${ipfw_cmd} add pipe ${shaped_ext_res_g2_pipe_num_out} all from any to any in via ${iif} tagged ${shaped_ext_res_g2_pipe_num_out} // pipe \(${shaped_ext_res_g2_name}:${shaped_ext_res_g2_bw_out}:${shaped_ext_res_g2_q_out}\) \|out\| fi if [ ! -z ${shaped_ext_res_g3_ne_flag} ]; then ${ipfw_cmd} add pipe ${shaped_ext_res_g3_pipe_num_out} all from any to any in via ${iif} tagged ${shaped_ext_res_g3_pipe_num_out} // pipe \(${shaped_ext_res_g3_name}:${shaped_ext_res_g3_bw_out}:${shaped_ext_res_g3_q_out}\) \|out\| fi #Collective pipe ${ipfw_cmd} add pipe ${sum_shaped_ext_res_pipe_num_out} tag ${sum_shaped_ext_res_pipe_num_out} all from any to any in via ${iif} tagged ${shaped_ext_res_g1_pipe_num_out},${shaped_ext_res_g2_pipe_num_out},${shaped_ext_res_g3_pipe_num_out} // collective pipe \(${sum_shaped_ext_res_bw_out}:${sum_shaped_ext_res_q_out}\) \|out\| ${ipfw_cmd} add skipto ${f_num_natb} all from any to any in via ${iif} tagged ${sum_shaped_ext_res_pipe_num_out} // end of external resources shaper block \|out\| fi #User pipes if [ ! -z ${shaped_users_ne_flag} ]; then ${ipfw_cmd} add ${f_num_uoutshb} count all from any to any // begin users shaper block \|out\| #User group 1 #Apply shaped_users_g1_acl for loop in ${shaped_users_g1_acl} do echo $loop | ${grep_cmd} -v "^#" > ${dev_null} if [ $? -eq 0 ]; then ${ipfw_cmd} add skipto ${f_num_uoutshb_inj} tag ${shaped_users_g1_pipe_num_out} all from ${loop} to any in via ${iif} // tagging \|out\| shaped_users_g1_ne_flag="yes" fi done #User group 2 #Apply shaped_users_g2_acl for loop in ${shaped_users_g2_acl} do echo $loop | ${grep_cmd} -v "^#" > ${dev_null} if [ $? -eq 0 ]; then ${ipfw_cmd} add skipto ${f_num_uoutshb_inj} tag ${shaped_users_g2_pipe_num_out} all from ${loop} to any in via ${iif} // tagging \|out\| shaped_users_g2_ne_flag="yes" fi done #User group 3 #Apply shaped_users_g3_acl for loop in ${shaped_users_g3_acl} do echo $loop | ${grep_cmd} -v "^#" > ${dev_null} if [ $? -eq 0 ]; then ${ipfw_cmd} add skipto ${f_num_uoutshb_inj} tag ${shaped_users_g3_pipe_num_out} all from ${loop} to any in via ${iif} // tagging \|out\| shaped_users_g3_ne_flag="yes" fi done #Add more groups below #... ${ipfw_cmd} add ${f_num_uoutshb_inj} count all from any to any // begin inject tagged to pipes block \|out\| #Inject tagged to pipes #Per user pipes if [ ! -z ${shaped_users_g1_ne_flag} ]; then ${ipfw_cmd} add pipe ${shaped_users_g1_pipe_num_out} all from any to any in via ${iif} tagged ${shaped_users_g1_pipe_num_out} // pipe \(${shaped_users_g1_name}:${shaped_users_g1_bw_out}:${shaped_users_g1_q_out}\) \|out\| fi if [ ! -z ${shaped_users_g2_ne_flag} ]; then ${ipfw_cmd} add pipe ${shaped_users_g2_pipe_num_out} all from any to any in via ${iif} tagged ${shaped_users_g2_pipe_num_out} // pipe \(${shaped_users_g2_name}:${shaped_users_g2_bw_out}:${shaped_users_g2_q_out}\) \|out\| fi if [ ! -z ${shaped_users_g3_ne_flag} ]; then ${ipfw_cmd} add pipe ${shaped_users_g3_pipe_num_out} all from any to any in via ${iif} tagged ${shaped_users_g3_pipe_num_out} // pipe \(${shaped_users_g3_name}:${shaped_users_g3_bw_out}:${shaped_users_g3_q_out}\) \|out\| fi #Collective pipe ${ipfw_cmd} add pipe ${sum_shaped_users_pipe_num_out} tag ${sum_shaped_users_pipe_num_out} all from any to any in via ${iif} tagged ${shaped_users_g1_pipe_num_out},${shaped_users_g2_pipe_num_out},${shaped_users_g3_pipe_num_out} // collective pipe \(${sum_shaped_users_bw_out}:${sum_shaped_users_q_out}\) \|out\| ${ipfw_cmd} add skipto ${f_num_natb} all from any to any in via ${iif} tagged ${sum_shaped_users_pipe_num_out} // end of external resources shaper block \|out\| fi #Add more pipe groups below #... ;; *) ;; esac ############################################################################### #Skip all outgoing traffic up to standart rules block ${ipfw_cmd} add skipto ${f_num_stdb} all from any to any in via ${iif} // skip outgoing traffic up to standart rules block ${ipfw_cmd} add ${f_num_natb} count all from any to any // begin NAT block #NAT rules ${ipfw_cmd} add divert natd all from any to any via ${oif} // NAT #Stop windows flood from outside ${ipfw_cmd} add deny all from any to ${onet}:${omask} 135,137-139,445 in via ${oif} // Stop windows flood from outside ############################################################################### #Inject to pipes (incoming packets) ############################## case ${shaper_enable} in [Yy][Ee][Ss]) ${ipfw_cmd} add ${f_num_inshb} count all from any to any // begin shaper block \|in\| if [ ! -z ${shaped_ext_res_ne_flag} ]; then #Not shaped resources #Apply not_shaped_ext_res_acl for loop in ${not_shaped_ext_res_acl} do echo $loop | ${grep_cmd} -v "^#" > ${dev_null} if [ $? -eq 0 ]; then ${ipfw_cmd} add skipto ${f_num_stdb} all from ${loop} to ${inet}:${imask} in via ${oif} // skip not shaped resources \|in\| fi done fi if [ ! -z ${shaped_users_ne_flag} ]; then #Not shaped users #Apply not_shaped_users_acl for loop in ${not_shaped_users_acl} do echo $loop | ${grep_cmd} -v "^#" > ${dev_null} if [ $? -eq 0 ]; then ${ipfw_cmd} add skipto ${f_num_stdb} all from any to ${loop} in via ${oif} // skip not shaped users \|in\| fi done fi #External resources pipes if [ ! -z ${shaped_ext_res_ne_flag} ]; then ${ipfw_cmd} add ${f_num_rinshb} count all from any to any // begin external resources shaper block \|in\| #External resources group 1 #Apply shaped_ext_res_g1_acl for loop in ${shaped_ext_res_g1_acl} do echo $loop | ${grep_cmd} -v "^#" > ${dev_null} if [ $? -eq 0 ]; then ${ipfw_cmd} add skipto ${f_num_rinshb_inj} tag ${shaped_ext_res_g1_pipe_num_in} all from ${loop} to ${inet}:${imask} in via ${oif} // tagging \|in\| fi done #External resources group 2 #Apply shaped_ext_res_g2_acl for loop in ${shaped_ext_res_g2_acl} do echo $loop | ${grep_cmd} -v "^#" > ${dev_null} if [ $? -eq 0 ]; then ${ipfw_cmd} add skipto ${f_num_rinshb_inj} tag ${shaped_ext_res_g2_pipe_num_in} all from ${loop} to ${inet}:${imask} in via ${oif} // tagging \|in\| fi done #External resources group 3 #Apply shaped_ext_res_g3_acl for loop in ${shaped_ext_res_g3_acl} do echo $loop | ${grep_cmd} -v "^#" > ${dev_null} if [ $? -eq 0 ]; then ${ipfw_cmd} add skipto ${f_num_rinshb_inj} tag ${shaped_ext_res_g3_pipe_num_in} all from ${loop} to ${inet}:${imask} in via ${oif} // tagging \|in\| fi done #Add more groups below #... ${ipfw_cmd} add ${f_num_rinshb_inj} count all from any to any // begin inject tagged to pipes block \|in\| #Inject tagged to pipes #Per user pipes if [ ! -z ${shaped_ext_res_g1_ne_flag} ]; then ${ipfw_cmd} add pipe ${shaped_ext_res_g1_pipe_num_in} all from any to any in via ${oif} tagged ${shaped_ext_res_g1_pipe_num_in} // pipe \(${shaped_ext_res_g1_name}:${shaped_ext_res_g1_bw_in}:${shaped_ext_res_g1_q_in}\) \|in\| fi if [ ! -z ${shaped_ext_res_g2_ne_flag} ]; then ${ipfw_cmd} add pipe ${shaped_ext_res_g2_pipe_num_in} all from any to any in via ${oif} tagged ${shaped_ext_res_g2_pipe_num_in} // pipe \(${shaped_ext_res_g2_name}:${shaped_ext_res_g2_bw_in}:${shaped_ext_res_g2_q_in}\) \|in\| fi if [ ! -z ${shaped_ext_res_g3_ne_flag} ]; then ${ipfw_cmd} add pipe ${shaped_ext_res_g3_pipe_num_in} all from any to any in via ${oif} tagged ${shaped_ext_res_g3_pipe_num_in} // pipe \(${shaped_ext_res_g3_name}:${shaped_ext_res_g3_bw_in}:${shaped_ext_res_g3_q_in}\) \|in\| fi #Collective pipe ${ipfw_cmd} add pipe ${sum_shaped_ext_res_pipe_num_in} tag ${sum_shaped_ext_res_pipe_num_in} all from any to any in via ${oif} tagged ${shaped_ext_res_g1_pipe_num_in},${shaped_ext_res_g2_pipe_num_in},${shaped_ext_res_g3_pipe_num_in} // collective pipe \(${sum_shaped_ext_res_bw_in}:${sum_shaped_ext_res_q_in}\) \|in\| ${ipfw_cmd} add skipto ${f_num_stdb} all from any to any in via ${oif} tagged ${sum_shaped_ext_res_pipe_num_in} // end of external resources shaper block \|in\| fi #User pipes if [ ! -z ${shaped_users_ne_flag} ]; then ${ipfw_cmd} add ${f_num_uinshb} count all from any to any // begin users shaper block \|in\| #User group 1 #Apply shaped_users_g1_acl for loop in ${shaped_users_g1_acl} do echo $loop | ${grep_cmd} -v "^#" > ${dev_null} if [ $? -eq 0 ]; then ${ipfw_cmd} add skipto ${f_num_uinshb_inj} tag ${shaped_users_g1_pipe_num_in} all from any to ${loop} in via ${oif} // tagging \|in\| fi done #User group 2 #Apply shaped_users_g2_acl for loop in ${shaped_users_g2_acl} do echo $loop | ${grep_cmd} -v "^#" > ${dev_null} if [ $? -eq 0 ]; then ${ipfw_cmd} add skipto ${f_num_uinshb_inj} tag ${shaped_users_g2_pipe_num_in} all from any to ${loop} in via ${oif} // tagging \|in\| fi done #User group 3 #Apply shaped_users_g3_acl for loop in ${shaped_users_g3_acl} do echo $loop | ${grep_cmd} -v "^#" > ${dev_null} if [ $? -eq 0 ]; then ${ipfw_cmd} add skipto ${f_num_uinshb_inj} tag ${shaped_users_g3_pipe_num_in} all from any to ${loop} in via ${oif} // tagging \|in\| fi done #Add more groups below #... ${ipfw_cmd} add ${f_num_uinshb_inj} count all from any to any // begin inject tagged to pipes block \|in\| #Inject tagged to pipes #Per user pipes if [ ! -z ${shaped_users_g1_ne_flag} ]; then ${ipfw_cmd} add pipe ${shaped_users_g1_pipe_num_in} all from any to any in via ${oif} tagged ${shaped_users_g1_pipe_num_in} // pipe \(${shaped_users_g1_name}:${shaped_users_g1_bw_in}:${shaped_users_g1_q_in}\) \|in\| fi if [ ! -z ${shaped_users_g2_ne_flag} ]; then ${ipfw_cmd} add pipe ${shaped_users_g2_pipe_num_in} all from any to any in via ${oif} tagged ${shaped_users_g2_pipe_num_in} // pipe \(${shaped_users_g2_name}:${shaped_users_g2_bw_in}:${shaped_users_g2_q_in}\) \|in\| fi if [ ! -z ${shaped_users_g3_ne_flag} ]; then ${ipfw_cmd} add pipe ${shaped_users_g3_pipe_num_in} all from any to any in via ${oif} tagged ${shaped_users_g3_pipe_num_in} // pipe \(${shaped_users_g3_name}:${shaped_users_g3_bw_in}:${shaped_users_g3_q_in}\) \|in\| fi #Collective pipe ${ipfw_cmd} add pipe ${sum_shaped_users_pipe_num_in} tag ${sum_shaped_users_pipe_num_in} all from any to any in via ${oif} tagged ${shaped_users_g1_pipe_num_in},${shaped_users_g2_pipe_num_in},${shaped_users_g3_pipe_num_in} // collective pipe \(${sum_shaped_users_bw_in}:${sum_shaped_users_q_in}\) \|in\| ${ipfw_cmd} add skipto ${f_num_stdb} all from any to any in via ${oif} tagged ${sum_shaped_users_pipe_num_in} // end of external resources shaper block \|in\| fi #Add more pipe groups below #... ;; *) ;; esac ############################################################################### #Standart rules ############################## ${ipfw_cmd} add ${f_num_stdb} count all from any to any // begin standart block #Allow TCP through if setup succeeded ${ipfw_cmd} add pass tcp from any to any established // allow packets RST or ACK bits set #Allow only secure ICMP types ${ipfw_cmd} add pass icmp from any to any icmptypes 0,3,4,8,11 // allow ICMP 0,3,4,8,11 ${ipfw_cmd} add deny log icmp from any to any // deny other ICMP #Allow IP fragments to pass through ${ipfw_cmd} add pass all from any to any frag // allow IP fragments #Allow access to our ssh #Allow from LAN ${ipfw_cmd} add pass tcp from ${inet}:${imask} to ${iip} 22 in via ${iif} // allow SSH from LAN #From outside #Apply pass_ssh_acl for loop in ${pass_ssh_acl} do echo $loop | ${grep_cmd} -v "^#" > ${dev_null} if [ $? -eq 0 ]; then ${ipfw_cmd} add pass tcp from ${loop} to ${oip} 22 in via ${oif} // allow SSH fi done # Block all another packets to 22 port ${ipfw_cmd} add deny log tcp from any to ${oip},${iip} 22 // deny SSH for all other ############################################################################### #Particular connections block ############################## #Allow a particular connection to go through the firewall. #Interval (f_num_pcb - f_num_lastb) must be conformed with `punch_fw` natd #option if you use this (man natd). Using for dynamic rules created by natd #for correctly work FTP in active mode through ipfw and similar. ${ipfw_cmd} add ${f_num_pcb} count all from any to any // begin particular connection block ############################################################################### #Last block ############################## ${ipfw_cmd} add ${f_num_lastb} count all from any to any // begin last block # Reject and log all setup of incoming connections from the outside ${ipfw_cmd} add deny log tcp from any to ${oip} in via ${oif} setup // reject all incoming TCP connection from outside # Allow any to any ${ipfw_cmd} add 65534 pass all from any to any // allow from any to any - the end of rules ############################################################################### #Pipes ############################## case ${shaper_enable} in [Yy][Ee][Ss]) #Reject to leave firewall after injecting packets to pipe. #Else maybe set net.inet.ip.fw.one_pass=0. ${ipfw_cmd} disable one_pass #pipes config #External resources pipes if [ ! -z ${shaped_ext_res_ne_flag} ]; then #External resources group 1 if [ ! -z ${shaped_ext_res_g1_ne_flag} ]; then ${ipfw_cmd} pipe ${shaped_ext_res_g1_pipe_num_in} config bw ${shaped_ext_res_g1_bw_in} queue ${shaped_ext_res_g1_q_in} mask dst-ip 0xffffffff ${ipfw_cmd} pipe ${shaped_ext_res_g1_pipe_num_out} config bw ${shaped_ext_res_g1_bw_out} queue ${shaped_ext_res_g1_q_out} mask src-ip 0xffffffff fi #External resources group 2 if [ ! -z ${shaped_ext_res_g2_ne_flag} ]; then ${ipfw_cmd} pipe ${shaped_ext_res_g2_pipe_num_in} config bw ${shaped_ext_res_g2_bw_in} queue ${shaped_ext_res_g2_q_in} mask dst-ip 0xffffffff ${ipfw_cmd} pipe ${shaped_ext_res_g2_pipe_num_out} config bw ${shaped_ext_res_g2_bw_out} queue ${shaped_ext_res_g2_q_out} mask src-ip 0xffffffff fi #External resources group 3 if [ ! -z ${shaped_ext_res_g3_ne_flag} ]; then ${ipfw_cmd} pipe ${shaped_ext_res_g3_pipe_num_in} config bw ${shaped_ext_res_g3_bw_in} queue ${shaped_ext_res_g3_q_in} mask dst-ip 0xffffffff ${ipfw_cmd} pipe ${shaped_ext_res_g3_pipe_num_out} config bw ${shaped_ext_res_g3_bw_out} queue ${shaped_ext_res_g3_q_out} mask src-ip 0xffffffff fi #Add more groups below #... #Collective user's pipe ${ipfw_cmd} pipe ${sum_shaped_ext_res_pipe_num_in} config bw ${sum_shaped_ext_res_bw_in} queue ${sum_shaped_ext_res_q_in} ${ipfw_cmd} pipe ${sum_shaped_ext_res_pipe_num_out} config bw ${sum_shaped_ext_res_bw_out} queue ${sum_shaped_ext_res_q_out} fi #Personal pipes for each user if [ ! -z ${shaped_users_ne_flag} ]; then #User group 1 if [ ! -z ${shaped_users_g1_ne_flag} ]; then ${ipfw_cmd} pipe ${shaped_users_g1_pipe_num_in} config bw ${shaped_users_g1_bw_in} queue ${shaped_users_g1_q_in} mask dst-ip 0xffffffff ${ipfw_cmd} pipe ${shaped_users_g1_pipe_num_out} config bw ${shaped_users_g1_bw_out} queue ${shaped_users_g1_q_out} mask src-ip 0xffffffff fi #User group 2 if [ ! -z ${shaped_users_g2_ne_flag} ]; then ${ipfw_cmd} pipe ${shaped_users_g2_pipe_num_in} config bw ${shaped_users_g2_bw_in} queue ${shaped_users_g2_q_in} mask dst-ip 0xffffffff ${ipfw_cmd} pipe ${shaped_users_g2_pipe_num_out} config bw ${shaped_users_g2_bw_out} queue ${shaped_users_g2_q_out} mask src-ip 0xffffffff fi #User group 3 if [ ! -z ${shaped_users_g3_ne_flag} ]; then ${ipfw_cmd} pipe ${shaped_users_g3_pipe_num_in} config bw ${shaped_users_g3_bw_in} queue ${shaped_users_g3_q_in} mask dst-ip 0xffffffff ${ipfw_cmd} pipe ${shaped_users_g3_pipe_num_out} config bw ${shaped_users_g3_bw_out} queue ${shaped_users_g3_q_out} mask src-ip 0xffffffff fi #Add more groups below #... #Collective user's pipe ${ipfw_cmd} pipe ${sum_shaped_users_pipe_num_in} config bw ${sum_shaped_users_bw_in} queue ${sum_shaped_users_q_in} ${ipfw_cmd} pipe ${sum_shaped_users_pipe_num_out} config bw ${sum_shaped_users_bw_out} queue ${sum_shaped_users_q_out} fi ;; *) ;; esac ############################################################################### #The end

<< Предыдущая ИНДЕКС Исправить src / Печать Следующая >>

Обсуждение [ RSS ]
 
  • 1.1, grayich, 16:16, 25/03/2008 [ответить] [смотреть все]
  • +/
    а можно еще ipfw show и ipfw pipe show глянуть этого?
     
     
  • 2.3, Pahanivo, 18:58, 26/03/2008 [^] [ответить] [смотреть все]
  • +/
    Чтобы посмотреть список правил которые скрипт сгенерить без их фактического прим... весь текст скрыт [показать]
     
  • 1.2, Pahanivo, 18:42, 26/03/2008 [ответить] [смотреть все]  
  • +/
    В скрипте маленькая ошибочка В секции NAT блок ... весь текст скрыт [показать]
     
  • 1.4, Tux, 15:35, 11/12/2008 [ответить] [смотреть все]  
  • +/
    divert natd - Это та ещё параша. сколько раз встречал - всегда проблемы с ним. Даже User space ppp натит на порядок лучше.

    dummynet вещь очень удобная, но для полного счастья её надо прикручивать к нормальному файеру типа PF

    Давно использую PF на фришке

     
     
  • 2.5, DeadLoco, 09:12, 02/02/2009 [^] [ответить] [смотреть все]  
  • +/
    Вы просто не умеете готовить IPFW и NATD. Использую их еще с R2.2.1, и никаких проблем не возникало. С учетом того, что с некоторых пор трансляция адресов сидит в ядре фрей, единственный существенный аргумент против натд (повышенная нагрузка, связанная с переключениями контекста) актуальность потерял.

    Если же вам сложно прописать правила форварда для корректной работы сервисов, то разве это проблема файрволла?

     
     
  • 3.8, Pahanivo, 19:06, 21/03/2009 [^] [ответить] [смотреть все]  
  • +/
    также юзаю ipfw + natd с четверки
    а многих машинах
    я никогда не встречал каких либо проблем связанных с работой этой связки

     
  • 1.6, evi, 11:25, 04/02/2009 [ответить] [смотреть все]  
  • +/
    Вопросик: как заставить программу (torrent-клиент) запущенную на самом шлюзе участвовать в процессе дележки трафика через dummynet? А то она напрямую шлет свои пакеты на default gateway, то есть работает параллельно с dummynet.
    Можно ли как-то привязать программу к внутреннему интерфейсу, чтобы пакеты с внутреннего интерфейса пересылались на внешний, проходили NAT, dummynet и потом уже шли в инет?
     
     
  • 2.7, Solar, 10:24, 12/03/2009 [^] [ответить] [смотреть все]  
  • +/
    указать роут default на текущую машину?
     
  • 1.9, Kenji, 10:45, 04/11/2009 [ответить] [смотреть все]  
  • +/
    люди плз объясните мне что с этим делать? прописывать в конф файлы? или это можно как то скопипастить и запустить на выполнение?! а то я перепробовал пару-тройку статей по настройке дамминета, но ни поодной у меня не заработало... ЗЫ и не бейте сильно, я полный дуб пока в этом...
     

    Ваш комментарий
    Имя:         
    E-Mail:      
    Заголовок:
    Текст:





      Закладки на сайте
      Проследить за страницей
    Created 1996-2017 by Maxim Chirkov  
    ДобавитьРекламаВебмастеруГИД  
    Hosting by Ihor